Basically i'm using the plugin to validate a form. I've got the basics set up and working. Now i'm trying to use remote so that I can check for a duplicate email address. The problem is as soon as I add my checking script the validation stops working on the email field completely. It constantly says "please enter a valid email address" no matter what I put in the field. If I don't have the remote bit in my code the email field validation works correctly.
I am creating an application that uses jQuery to make ajax calls to ASP.NET WCF Web Service. Everything works fine most of the time but eventually (about twice per week) the service stops working with the error below. The only solution is to clear the ASP.NET Temporary Files. The problem seems to start by the time the application pool recycles but not on each recycle. Please help as I'm trying to figure this out for weeks now!
WebHost failed to process a request. Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/6957828 Exception: System.ServiceModel.ServiceActivationException:
The service '/Chat2/Chat.svc' cannot be activated due to an exception during compilation. The exception message is: Could not load file or assembly 'App_Web_vpupi5wr,
Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.. ---> System.IO.FileNotFoundException: Could not load file or assembly'App_Web_vpupi5wr, Version=0.0.0.0,Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
I have a ASP.NET wizard that I need to use jQuery to manipulate some of the CSS styles. For example if a certain criteria is met it will hide a button:
This works great on the first page, but subsequent pages (loaded as controls .ascx) don't work. The wizard doesn't load a new page each time, but simple reloads part of the content using the built in wizard feature.
I'm using some JS to show some divs.The divs' content is set up in a MultiView control in the server. Depending on certain parameters, I trigger some postbacks to make the server select the appropriate view. The problem is that everything works if I keep the alert(1); below, but stops working if I remove it.
Here is the code. I have a button which its OnClick() calls ShowEditor(), with an element and a type. ShowEditor() makes the editor's div visible after raising a postback to let the server select the correct view in the MultiView based on the type. This works fine. The editor loads and there is a div inside (vwText_Text1) which I'd like to assign an OnClick event to. This only works if the alert() is present.
I want to load a popup when a user clicks a button. The buttons are images located inside a tabpanel. The first time the page is loaded the helpEvents DOES display the popup and the 'click' popup. Then I navigate to Tabpanel tab2, and the helpTickets button doesnt work (doesnt even display the 'click' popup) Then I navigate back to Tabpanel tpEventDetails, and the helpEvents button doesnt work anymore either(and also doesnt even display the 'click' popup anymore) So I think something gets lost in the updatepanel on callback...but what? and how to fix it?
I have a div called address which as a textarea. When I click a hyperlink, it toggles the div up and down. After clicking a an asp.net button the div collapses which is fine, but I noticed the url turns from [URL] to [URL] and now the toggle does not work. Here is the script:
I have a text box that is intended for an Email address. I am using a Regular eExppression validation control to validate the email address. When I place the following lines of code in a blank web Form, the validator works properly.
However, when I use the validation control within a CreateUserWizard control, it does not seem to fire but other validation controls (Required and Custom validators) do fire, but not the regular expression validator above for validating the address. The following is my complete web page. The two controls above appear unchanged in the code below, they are simply embedded into the wizard control mentioned.
jQuery validation is working fine on my machine, when i pushed it to test server it won't it's throwing some errors which is kind of surprising.These are the errors I am getting: $.validator is null or not an object...I've never gotten this error before and it throwing an error when I declared a variable like var isValid.I don't know what to do. I am doing the custom validation methods not in the document.ready(). Does this cause this error? I wonder because all jquery validations are passing and hitting the server side validations.
Im using MVC 2 and .NET 4 on my local machine. I can debug my project using the Visual Studio Development Server locally. Everything works great, including the validation using
I have an problem with dropdowns and validation. With MvcValidation it worked perfectly, since upgrade to jquery the validation for the dropdowns fail. Example:
[Code]....
If I click the submit button als fields are validated, except the dropdowns...why?
Btw. how do I add dynamic validation for dynamic forms in jquery? I know that it was something like class="required" as an html attribute in former days.
I have applied validation through JQuery Validation Plugin on my page. The validation works fine but once the Clear button is hit to clear out all the fields on the form, and then the save button is clicked again, the validation doesn't fire and the form gets submitted. I have called the following javascript function on click of Clear button to clear out all the form fields :-
[code]...
The Clear button is on a ChildPage and ResetForm function is on the MasterPage.
I am using asp.net 4.0 and I have use FormView with JQuery Validation but thing is that when I close my Internet connection my browser will show offline. What can be be the problem and How to detect which thing is trying to connect Internet How can I solve it.
I'm using the ASP.Net Validation controls and I want to display the Validation Summary in a JQuery Dialog instead of the native javascript alert messagebox. I've found this solution (aspsnippets) by overriding the clientside WebForm_OnSubmit() function:
The WebForm_OnSubmit() function is being rendered by the BaseValidator control and in the form tag te following attribute is being added: onsubmit="javascript:return WebForm_OnSubmit();
I am running into a problem on a page which has an UpdatePanel. The input field with the validator (1 to make it simple) is in a Panel within an UpdatePanel. The Panel is set to Visible=False at the first Page Load. There's a button inside the UpdatePanel which makes the Panel with the Validator Visible.
When this happens, the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag are not being rendered because it's an AJAX callback and the form tag is outside the updatepanel (in a master page), so the validation summary will not be shown in the jquery dialog.
Validation is being performed, so the validation summary wil be shown in a div on a page, but the validation is not being called by the WebForm_OnSubmit() function in this case, because it's not being rendered.
So, when the validators are not visible at the first load and they will be made visible by an AJAX callback, the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag are not being rendered on the pag. Because of that, the WebForm_OnSubmit() function will not be called and the validation summary will not be shown in the JQuery dialog (although it is being shown in a div on the page). How can I get the Validation Summary to be shown in de JQuery dialog in this case?
Is there another function that has to be overriden for this case? I know I can use a Full Postback for the New button and then all the stuff needed is being rendered on the page, or I can make the panel not visible by using a style, but I don't prefer that because there are a lot of pages with this situation.
One solution is to use a dummy textbox with a dummy validator (with a dummy validationgroup) of which I set the display to none. Then this dummy validator will cause the the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag to be rendered.
Running solution with VB.NET & C#, ASP.NET, VS 2008 with ReSharper 5 Most of the time, ReSharper is working (redundant code grayed out, squiggles, etc.) Sometimes, on the same code where it was working, nothing is highlighted to show ReSharper is enabled. I haven't done anything except modify code and debug. What is going on that turns it on/off?
We have an updatepanel in our site and there are a number of linkbuttons in it.Please note that the site works fine across all browsers without proxy the proxy changes the url from for instance www.mysite.net to 0-www.mysite.net.edu.net it also works fine in all browsers but IE the issue is that under proxy and in IE8, it gives an error when clicking one of the linkbuttons, the error message is
Im working on an ASP.Net web forms application, where I have a form and the Index is working correctly, until I select a value from one specific control, a dropdownlist. After that no matter what control I am on if I press TAB it will go to the URL/Address Bar, from there to the search bar and then again to the URL bar...
I developed and deployed a web application using ASP.NET,C# successfully. The application was running perfectly until few days back. [NOTE: It still works fine on local machine (tested using both development server and IIS)] What happens now is: The website opens perfectly. After few operations which involves database interactions, in all the pages, the pages stop responding. I mean, after a few clicks, if I try another operation the page starts postback for unlimited time period and never gets rendered and a following message is given: The connection was reset: Firefox 3.5... IE cannot display the web page: IE 7, 8 There is no database connectivity issues. I checked event logs on the web server and found few unhandlled exceptions, I corrected those. Now the event log doesn't show any error. But the problem is same.
I tried accessing the page from web server's browser, everything works fine. Even my boss can browse all pages with no problem (both have Win Server installed). Other machines (mostly XP) can't browse after sometime(as described above). I checked the memory usage, cpu time - NO ISSUES.
We have an updatepanel in our site and there are a number of linkbuttons in it. Please note that the site works fine in all browsers without proxy the proxy changes the url from for instance [URL] to 0-[URL] it also works fine in all browsers but IE the issue is that under proxy and in IE8, it gives an error when clicking one of the linkbuttons, the error message is "Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; InfoPath.1; .NET4.0C; .NET4.0E) Timestamp: Sun, 13 Mar 2011 20:38:58 UTC
Message: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'.
Line: 4674 Char: 21 Code: 0"
I have no idea what goes wrong here, it seems that IE can't parse the response?
I'm trying to write some code that checks the number of days between two dates, when I set the date on my IIS7 server to anytime in the future I get the standard "Internet Explorer cannot display the webpage" screen. This happens if I comment out all my date checking code, with todays date it loads with any future date it doesn't. I've tried rerunning IISReset which makes no difference.
If you do a search for "ie8 back button disabled" you'll see a number of blogs with people having difficulties with the Internet Explorer version 8 back button becoming disabled. This now happened to one of my ASP .Net pages. The page uses a user control, aspx page, and a master page. It uses no redirects and seems to be happening when I click the back button and then the forward button (after the forward button is clicked, it does not fire the Load event and the back button becomes disabled). Has anyone else encountered this and do you have a solution for it?
So we have three 2008 R2 Servers where two are configured to be web servers (IIS 7.5), and the third a session state server. I have set the SessionState and MachineKey settings in the applications web.config. After I restart the two web servers I can log into one server, then change the IP address to the other server, and I am still logged in. Success.
I can typically log in/out with any user account I want, change the ip address back and forth, and all is well until some random time between 30-60 minutes when I log in to one server, change the IP address, and the new server asks for credentials.
This is the sessionState setting in both web.configs:
The application resides under the default web site, and uses the default application pool. I am using forms authentication with a timeout of 20 minutes. I am not receiving any error events on any of the three servers when this happens, and restarting the two web servers fixes the problem for a while. The two web servers are not clustered per-se, but will be served round-robin via a network device.
I am using asp:ScriptManager and asp:UpdatePanel to populate a DropDown , and for every field need to display hits in div.In order to Implement the hint I am using JS, it works fine unless I started to populate a dropdown based on another one.
here is some code lines from page and JS
<asp:ScriptManager ID="sm" runat="server" EnablePageMethods="true"></asp:ScriptManager> <asp:UpdatePanel runat="server" ID="up0"> <ContentTemplate> <dd><asp:DropDownList runat="server" ID="CCategory" CssClass="lst" ValidationGroup="Property" AutoPostBack="true" onselectedindexchanged="CCategory_SelectedIndexChanged" /><span class="hint">Please choose a city where you want to or having a property.<span class="hint-pointer"> </span></span></dd>........
When running the ASP.NET Development Server, everything is working fine. However, when I deploy my asp.net application to the production server (IIS 7.0 integrated mode, fresh install), my location tags in my web.config file are being ignored.
Case in point: I'm using forms authentication, and when the user arrives at my login.aspx page, the external css & js files are not being loaded...even though I have specified that those files should be available to all users (auth'd or not). However, once the user is logged in, the files do in fact load.
I am trying to replace a value in a drop down box. The replacing works fine (after help from this fine community) but afterwards the slide function stops working. I can't find any errors so I'm asking if this could be related to how jQuery and javaScript works? Are elements "mapped" to the DOM on load and if so; would that imply that replacing a div with another div would result in jQuery loosing track of the divs? I use this code to check if a div is clicked:
$(document).ready(function () { $('.button_slide').click(function () { var num = $(this).attr('rel'); $('div.content_slide:not(.' + num + ') ').slideUp(400); $('div.' + num).slideToggle(400); }); return false; });
This is the jQuery that drops down the box: $(function () { $('.click_button').click(function () { var num = $(this).attr('rel'); $('.button_slide[rel="' + num + '"]').replaceWith("<div class='button_slide' rel='" + num + "' >" + $(this).val() + "</div>"); $('div.content_slide').slideUp(600); }); });
I'm pulling my hair on this one and jQuery isn't my stronger side... How would you solve this?
