I am still new to Jquery and trying to sell my boss on it.Is there any good examples that show how I can say when the user mouses over an area of the screen( for a certian Item) it would popup the details of that item? am using vs 2010 / mvc 2 and would like to use Json to get the data for the popup. So it does not have to be loaded all at one time.
View 1 Replies
Is it possible to take a screen capture of a particular area of a web-page from the web-page's own ASP.NET code?
I need to display 6 images that are stacked on top of one another using CSS, and I'd like to offer the user the ability to right-click save-as if possible by stacking the screen capture on top top of the original image stack.
I have a page with several asp buttons defined on a Master Page. I only wish these buttons to be activated when they are selected by the mouse click. I have one button on the content of the form, that is the button I want to execute if the user hits enter and it is selected or they use the mouse. So in a nutshell. how do I stop the buttons on the master page from executing unless the user mouses them?
View 1 RepliesI used ModalPopup Control on this link, [URL]How should I write the code that to close pop up by click the area outside the pop up panel?I use AjaxControlToolkit-Framework3.5SP1
View 7 RepliesI am displaying image on page load event. I have difrent sizes image i want to get screen.width and screen.height values by javascript on page load event and then using to get particular size's image on page load event in asp.net with c#.
If browser not support javascript then default size will display.
i am using light box in one of my asp.net website On a linkbutton click, an application form opens in a lightbox.this form contains a dropdownlist.till now it was working fine.but now i have to change some coding.Whenever a value is selected from that dropdownlist,its selectedindexchanged is fired.At this moment my form with light box gets disapper.what i want is,it should remain on screen as it is when any of the server side event is fired.
View 2 RepliesHow to display Loading screen using JQuery on submit button click?
I would like to use JQuery to show loading screen.
[Code]....
But this code doesn't call Button1_Click.
i need to record the screen of the user. basically what the flow is,
1). the application will capture the user's screen
2). store it on server( images)
3). convert the images in avi
4). display the avi to the end user
I have created a simple mvc portable area project with a simple view displaying hello world.
In the portable areas project i added the view as embedded resource ,compiled to dll and added the reference
in the consuming web project.
How can i call the embedded portable area view from another web project
I am creating a project in which i want to display my web page in full screen & Does not allow the end user to ext the full screen until he/she press the button. I google/bing but i dint get any help full material. Even i use this code
[Code]....
I have written a ASP.NET program for a customer, I want to add a message similar to "Preview version, ABD Consulting" on the master.master page, I had thought to use Response.write but it messes up the look of the page as it seems to move page elemets. If I use a label the customer can remove it from the Master.master file. The customer is in a different country so I want to ensure I'm paid.
View 5 RepliesI have a custom CRM package and I need to allow specific users have different layouts on selected screens. I do not want to support multiple software packages so I am thinking that I have some type of interface that allows a user to select what fields they want to input on a given screen. However, what is the easiest way to make this happen? I am thinking that I have some type of XML file that is read that a user can define.
View 1 RepliesI have question regarding printer option page which pop up when i click on print button on crystalreportviewer and when i click okay on that pop up page it displays print preview of the report.
Is there any way to skip that pop up window(Printer Option) and just display (PDF)print preview screen instead?
(I am not exporting report to pdf, just want to display printview screen and when the user click on print button it will print out the page)
I have tried following code but i am getting error:
"Object reference not set to an instance of an object."
[code]....
I have upgraded web application from VS.2008 to vs 2010. I was using previously ReportViewer 2008 control in a page and replaced with 2010 ReportViewer Control.
I have installed the ReportViewer Redistributable also in my local pc as well as in the server. Also as per the new requirement I have placed the Scriptmanager in the web page where the reportviewer control located.
While running the page, the reportviewer run the report and is not showing the data on the screen. It shows the blank screen. But If I export the data to execl or world it is showing the data. Also the page numbers in the reportviewer showing the total pages available in the navigation bar. I am sure the report is running and bringing the data to the screen but not showing it.
The below is the exact scenario, One form will be there and when user click on "Edit" hyper link other window will open to get more details. In that new window also I have a grid or a table which has other hyperlink which lead to open other window and in that window I will enter few details and save it....
[code]....
User clicks the Edit Link Button on my grid and I want to launch a new screen for the user to do some edits...I need to be able to pull the ID but I cannot figure out what I need to pass to the HandleSelect function and then how to read my column3 to get selectButton.Attributes.Add("onClick", "return HandleSelect(????);")
View 8 Repliesi have page where i am calling user control, on user control i want to give button when i click button same user control should appear on popup screen but not able to do , here code
[Code]....
I have this following code but it gives me "invalid argument" error when I click on the 'a tag'. what is my mistake ?
[code]....
I have created my first MVC application. I am using forms authenticataion. I have created a custom action filter MyAppAuthorizationFilter which inherits from AuthorizeFilter. Inside this filter I'm authenticating the user credentials by checking them against a database table (by overriding OnAuthorize method). If the user is not authenticated, I am redirecting the users to a login page (which is view of LoginController). I am using this filter agaginst my main controller so that all actions in this filter will execute only if the user is authenticated.
I do not have any problem when I use the asp.net development server (shipped with Visual Studio). But when I deploy the app to our IIS7 server, I can see the login screen when I access the default url, but after entering the credentials (both correct and incorrect) and posting back the Login page, it stays on the Login page (clears the pwd, but not the username). Its never getting redirected to the home screen or invalid login screen.
IIS 7 server has .net framework 3.5SP1, but no MVC. So I deployed the System.Web.Mvc dll in the bin folder.
Here's my Code (I've omitted the views and models as they are not needed here):
[MyAppAuthorizationFilter]
public class MainController : Controller
{
//
// GET: / [code]......
I am using the below code where I put this tag on a .aspx page:
"<a name="tips"></a>"
Now if I from another page run the code in the hyperlink to navigate to this page2 where I have the above tag. The page will scroll down to this tag automatically where this tag will be at the TOP of the screen.
My question now is if it is instead possible to scroll to the position where you have this tag at the BOTTOM of the screen instead ?
[Code]....
how i can open my asp.net program on full screen (like i press F11)
Through C# code ?
On my page I have textbox in which user enters value. When 3 values are entered the autocomplete panel shows.In the panel the names and surnames of all available people are shown bassed on the value user enters. Bellow each name and surname is picture of each "candidate". However images are stored on another server (using https "protection") and some people don't have picture.
onerror="this.onerror=null;this.src='../Pics/Errors/NoPic.jpg'"
into <img> tags in Web Handler.
I have a custom control, that has takes some information from user and submit to the database. it is working fine in normal aspx pages. but when i display that custom user control in jQuery modal popup. The events does not fire or lets say the data is not submitted to the database.
View 3 RepliesI'm about to convert an existing webforms application to MVC. This existing system lean too much on JavaScript in my opinion, so I'm throwing around some ideas for a "lock screen" functionality. The user can be busy editing a form....any form, there are tons. "Lock Screen" essentially logs the user off, but when logging in again, they are taken back to the form they have been busy with and the values entered before are loaded. I also will have to provide a way to lock the screen after a certain time of inactivity.
View 3 RepliesWhen a user attempts to directly visit the url admin.aspx, and they are not an admin, they are redirected to the login page. However, the user then attempts to visit ViewWeek.aspx, it indicates that they are still logged in. Why does this ASP.NET authorization boot the user to the login screen, yet keep the user logged in? I'd rather it just direct the user to the default URL specified in the forms tag.
Here's my Forms Authentication:
<authentication mode="Forms">
<forms name=".ASPXFORMSAUTH" defaultUrl="ViewWeek.aspx" timeout="50000000" />
</authentication>
