am using asp.net mvc.. i have db2 database with one table..... i have a stroed procedure with input parmater as useridi need to pass userid to get all the results from table to display in jquery grid on UIplease
View 4 Replies
I have an application that uses an aps:GridView. The GridView is populated using a DataSource that calls a Stored Procedure. The DataSource passes parameters to the Stored Procedure based on some text fields. The page has been running slower than wanted, so I was doing some checking.
I ran SQL Profiler while loading the page, and saw the Stored Procedure was being called twice. I stepped through the code and found out that in the Page Load Complete event was where this was happening. In this event, I set the value of a parameter for the Stored Procedure, then did a DataBind on the GridView to pick up the data. As I was stepping through the code, I watched the SQL Profiler. When I got to the step of setting the parameter, the Stored Procedure had not yet been called. When I stepped through that and got to the DataBind command (before running that step), the SQL Profiler showed that the Stored Procedure had been called. Then I did the DataBind and the StoredProcedure was called again.
My question is, how do I get the parameters set, and get the GridView data bound, and only call the StoredProcedure once? If I comment out the DataBind step, the StoredProcedure never does get called (which seems really strange to me...).
I am looking to have 1 Gridview/Datagrid (which ever is now more appropriate) on my code in front,
the columns will need to be dynamically generated, with a "Always present" checkbox control with the default being checked
Each column will be a Label type - so not editable
The Idea is the user will tick or until each item that they wish to submit to the database.
I am able to dynamically populate the control - using new bouncontol, but I have been unable to then obtain the selected data.
My codebehind is below
[Code]....
[Code]....
I have been using the GridView control, to display data, but now my two datasources (Informix, and VisualM/Mumps) makes it very difficult to create a store procedure to with paging. Is there a better data grid, that will allow my users to scroll/search the current data set?
View 1 RepliesI have a grid page which has a datasource as a stored procedure. The grid page shows the fields obtained after executing the stored procedure.Now, there is a field called 'PURCHASE PRICE' on the stored procedure which can have empty values.If the grid page have that field empty, it should appear as the text box so that the users can enter some numeric values and run the page.
View 1 Replieshow to call a stored procedure and to display it in a grid view table..
View 3 Replieshow to bind maxid from table in Label using storedprocedure...
View 1 Repliesuse html tags ( <table> <tr>..<td></table> ) in stoted procdure and display asp.net page with table
View 1 RepliesThis is surareddy. i nead some small clarification in the "Stored Procedure"
how to convert the oracle Stored Procedure to sqlserver2005/2008 Stored Procedure.
right now i am enhancing the project that project already developed the oracle Stored Procedure. now our company is using sqlserver 2005/2008.
how to convert the Oracle Stored Procedure to sqlserver 2005 Stored Procedure
Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
View 4 Repliesi want to make a twitter like registration form using jquery and save data in database and display it in a grid after submitting data.this is what i got on net
<script src="Script/jquery-1.4.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$("#.addbutton").click(function () {
[Code]....
I would like to have a sample MVC 4 in c# displaying records from stored procedure.
View 14 RepliesI'm using the code below to display table contents in gridview;
Code:
SqlConnection oConn = new SqlConnection(ConfigurationManager.AppSettings["constring"]);
SqlDataAdapter cmdGrid = default(SqlDataAdapter);
DataSet dsGrid = new DataSet();
cmdGrid = new SqlDataAdapter( "SELECT * From Table1", oConn)
[Code] ....
How about displaying stored procedure in gridview with this procedure?
Code:
ALTER procedure [dbo].[spRetrieve]
@iIDint
as
SELECT dbo.Table1.ProductID, dbo.Table1.Product
FROM dbo.Table1
WHERE (dbo.Table1.UserID = @iID)
How can i do that?
I'm pretty much completely new to MVC - I've been playing around with some features for a few months and I'm currently implementing a simple administration panel for a website. I'm a very experienced developer, but the interaction between MVC views and javascript is confusing me a little bit. Here's my scenario:
I have a stored procedure that runs periodically via an agent job in MSSQL. The stored procedure synchronises data from an internal database - it can sometimes (depending on network demand and the amount of data) take a minute or two to run.I'm using LINQ to SQL as my data model.I need to be able to call the Stored Procedure on demand via the click of a button. This "works" if I call it within the code, but obviously I would prefer to make an async call via AJAX after clicking the button, so I can display an "Executing" image or indeterminate progress bar.
At the moment I have the following code in my Controller:
[Code]....
And the following code in my View (Razor syntax):
[Code]....
Which works perfectly fine. However, my brain isn't working this morning, and I'm struggling to figure out how to implement an AJAX call using the integrated JQuery classes?
I have created a viewmodel class for my custom page. I have a stored procedure which returns the DataTable(ORM tool). I cannot change this procedure. But I would like display the records from the stored procedure on View List. How can I display the values from the datatable in the List View?
public class CreateViewModel
{
[Required]
public DateTime StartDate {get; set;}
[Required]
[StringLength(250, ErrorMessage = "Details must be less than 250 characters")]
public string Details { get; set; }
}
I could probably figure this out if I tried to, but I have been working so long on code, I'm a little fried
I have a stored procedure, and I want to execute another stored procedure during a time period of lets say 1/1/2011 to 12/31/2011
How Would I accomplish this?
I would like to display the selected stored procedure information not executing or some other kind. I will have my list of stored procedures displayed on the form where the user can select the required and if click on Generate button i would like to display the text of that stored procedure as it is on the web form Sample Image
View 1 Replies[Code]....
i have a stored procedure with this values and i need just to make a button that will send something to "Equip" column,how to do it? write the values on my webpage and make a button to exec the procedu
in my web form there are two modalpopupextender. They both uses stored procedure to insert into the db. In the stored procedures, i'm checking for the duplicate values on the databse, if the duplicate exist, alerts me. On the form, there is also a stored procedure to insert into form data to the sql server 2008 express, the same checks are availabel for the form. But it doesn' dispaly the error message on the stored procedure although it catches the error. (seen on debug mode).
[Code]....
How can i upload image to a folder and its path to my database using stored procedure?
And similarly i want to retrieve images from database using their paths stored in database through stored procedure...
i want data to drop down list using stored procedure .
However im not able to do that.
Below is the result set when I execute my stored procedure. Based on condition no.of rows will change. I am using typed dataset to store result set.
NSV QTY MONTH/YEAR
264.95 31248 APR/07
273.23 34044 MAY/07
230.96 22232 JUN/07
711.93 81992 JUL/07
427.23 50345 AUG/07
297.90 36961 SEP/07
495.37 43079 OCT/07
648.48 52428 NOV/07
622.06 46364 DEC/07
407.02 46461 JAN/08
605.45 73439 FEB/08
224.81 28121 MAR/08
308.12 33356 APR/08
328.22 35605 MAY/08
372.41 34107 JUN/08
I have to show above result in RDLC file Like below.
APR/07 MAY/07 JUN/07................JUN/08
264.95 273.23 230.96.................372.41
31248 34044 22232 ...............34107
RDLC report? If I use table control,
Does anybody if it is possible that a stored procedure returns rows which is the result of the execution of another sp? Something like..
[Code]....
i want to return output parameter from 1 storeprocedure. into another stored procedure.
View 7 RepliesBelow is the result set when I execute my stored procedure. Based on condition no.of rows will change. I am using typed dataset to store result set.
NSV QTY MONTH/YEAR
264.95 31248
APR/07
273.23 34044
MAY/07
230.96 22232
JUN/07
711.93 81992
JUL/07
427.23 50345
AUG/07
297.90 36961
SEP/07
495.37 43079
OCT/07
648.48 52428
NOV/07
622.06 46364
DEC/07
407.02 46461
JAN/08
605.45 73439
FEB/08
224.81 28121
MAR/08
308.12 33356
APR/08
328.22 35605
MAY/08
372.41 34107
JUN/08
I have to show above result in RDLC file Like below.
APR/07 MAY/07 JUN/07................JUN/08
264.95 273.23 230.96.................372.41
31248 34044 22232 ...............34107
