SQL Server :: Can't Return Data Even In Particular Table?
Oct 1, 2010
I am new to Sql server 2005. I have a table in which contains many data. I need to take particular data. For example, I want to take value of 110652.795813712 from FTEBASEPAY column. So i have wrote the sql statment like in below. SELECT * From tblEmployees where FTEBASEPAY='53842.7782655718' But i am not able to get the particular value. Manually i have seen the tblEmployees table, in which contains the particular data ('53842.7782655718'). When i execute the above select statement, there is no result for it. What i have to for overcome this issue?I have to give one more information, the FTEBASEPAY dataType is float in tblEmployees table.
View 4 Replies
Similar Messages:
Aug 16, 2010
how to return two ids from the same table, i need to create a cursor, it has to use two
EID details of different LID of the same table.
[Code]....
The above query is wrong, it is getting duplicate rows, so i need to optimize it ti return the two values in two different variables in cursor.
View 4 Replies
Jan 16, 2011
I am wondering if jsonResult method can be used to return Data Table? If so, is it a json array or a json string?
View 6 Replies
Aug 30, 2013
1)table student
studentno varchar(50)
hobby1 varchar(40);
hobby2 varchar(40);
hobby3 varchar(40);
2)if record in data database such that
hobby1 hobby2 hobby3 in this maximum is one must be chose
like
here studentno hobby1 hobby2 hobby3
1 cricket null null
2 null hockey null
3 null null tennis
if i want to write function in mysql if i pass the studentno
i want to get the hobby of respective student
like select functionname(1)
your hobby is cricket
like select functionname(2)
your hobby is hockey
ike select functionname(3)
your hobby is tennis
View 1 Replies
Nov 23, 2010
I am adding table rows dynamically, after I return from a post back, these rows disappear.
Is there a way to preserve these rows and add them back on page load?
View 8 Replies
Nov 8, 2010
I have an update function in my data layer which is defined as:
public int UpdateRBTable(parameters ...) This calls a SQL Server Stored Procedure to perform an update function on the database.
The process does its job for updating the table. However, the stored procedure has a return value (which indicates how many rows were updated), but this return value is not returned to the application. The application always shows that a zero was returned from the stored procedure.
View 3 Replies
Feb 5, 2011
I want to take my return value from sql server to c#.
my code
SQL SERVER:
ALTER procedure [dbo].[userss](@email varchar(100),@password varchar(25),@name varchar(250),@DOB varchar(20),@acc_vari int,@ip_address varchar(50),@vari_code varchar(7) )
as
begin
declare @uid int
select @uid=uid from users where email='12we'
if(@uid>0)
return 0
else
insert into users values(@email,@password,@name,@DOB,@acc_vari,@ip_address,@vari_code )
end
In this i want to take return value "return 0 " from sql server to c#.
View 3 Replies
Oct 29, 2010
I have two tables for storing language translations - tblEN and tblES. They have the same structure which is nvcEnglish and nvcLocal - both nVarChar fields.
In nvcLocal of the Spanish table, I enter the Spanish translations of words and phrases used within my app. Problem is, when I add a bunch of new records to the English table I also have to go in and repeat the data entry into the Spanish table. I am wondering if there is a way to import the newly added records into the Spanish table using Transact SQL?The plain language query would be something like:
If the data in tblEN.nvcEnglish does not exist in tblES.nvcEnglish then insert a new row into tblES with the values from tblEN
View 5 Replies
Jul 21, 2010
[URL]above url contain a html table.I want to save this table value on XML and also want to save this table value on database MS2008.How to save html table values on database
View 3 Replies
Dec 27, 2010
i've created one package using ssis ..
That is used for transferring the data from the tableA to tableB daily at evening..
now my problem is ..
i've huge amount of data i.e upto 2GB of data while transferring for first time
the whole amount data is transferred.. and now i want to transfer only the daily updates
i.e what data i've entered today that much only it should transfer instead of whole data (2GB)..
how to do it .
View 8 Replies
Oct 8, 2010
im new to trigger concept
when i insert data in a table [DSR_OUT_PRO] data get enter in another table ie [trg_Insert_DSR_OUT_PRO] but 2 times..
Is it ok, or something is wrong..
View 1 Replies
Jan 25, 2011
i always got the empty string in form data posting. can you describe what the hell happened in my code? always got the empty string to insert to SQL server even it is drop down list selected value is empty. Is this the error in visual studio cause sometimes i can get the value and sometimes can't (inconsistent!!!)
Protected Function sqlparameter_insert_newscat() As SqlParameter()
Dim sqlparam(4) As SqlParameter
Dim ddlstatus As Boolean
If rbActive.Items(0).Selected = True Then
[code]...
View 2 Replies
Dec 6, 2010
I know this has to be easy. I'm just not sure of the best method to use. Should I be using ViewData?
Table 1 has columns:
ID
Name
TypeID
Table 2 has columns:
TypeID
TypeDescription
The tables are linked by a key on the TypeID column. I want to display:
Table1.ID
Table1.Name
Table2.TypeDescription
View 3 Replies
Dec 21, 2010
I am using VB.NET & SQL Server. My sproc returns something like this which I need to display on my web page as below:
sproc returns:
ClientNumber ClientName Product
------------------------------------------
100SON Sony TV
100SON Sony DVD Player
100SON Sony Cell Phone
200KEN Kenmoore Microwave
200KEN Kenmoore Dryer
Now based on these data, I need to display some information like below on label in the web page:
100SON - Sony - TV, DVD Player, Cell Phone
200KEN - Kenmoore - Microwave, Dryer
I need you advice on this.What would be the best way to do this?
(1) I can work further on this data in code to generate the required data or
(2) I can work further in the sproc itself to directly return the required data
View 4 Replies
Sep 29, 2010
i am writing a website that has a social networking element to it, and i want to display mutual friends of the person being viewed with the person that is viewing.
is it possible to search one database table and look for matching entries using 2 different usernames? if so how would i do it?
View 6 Replies
Dec 8, 2010
I am working on a page that has multiple sections and each section looks 'almost the same'. Having said that, I want to build the HTML on the server and render it for each section on the initial page load. On subsequent actions, I would do a ajax call and have the server return json data.
The other option is to 'hardcode' the HTML on the aspx page and have the JS do the necessary customizations for each section. The third option is to use an UpdatePanel and do everything server side.
Based on what should I be choosing what approach to use? What approach would you use for a page like this (think of it as a large page having sub sections on it)
Edit: One section has HTML such as user's name, and a table where users can add dependents. Another section is almost the same except its for a 'contractor' so there's additional HTML such as previous work history, but this one has name (readonly) and a table to add dependents just like the first one. Other sections have more or less the same HTML. A user can delete dependents as well, when that happens, I need to update the database and update the section to reflect one less dependent. I was hoping to make any subsequent actions as ajax calls that interact with the server and the database
View 3 Replies
Oct 19, 2010
I have the following code that i call from the page behind code.
when no records are in the table i get an error message
invalidcastexception
conversion from type DBNULL to type Decimal is not valid
I would prefare if the procedure did not throw this error message and returned a value to notify me that no records found when zero records returned
Public Shared Function invoicetotal(ByVal CustEmail As String) As Decimal
' Dim selectcommand As New SqlCommand
Dim CONNECTION As SqlConnection = MaintainDB.GetConnectionString
Dim sel As String _
[Code]....
View 2 Replies
Jul 26, 2010
This question is regarding the ASP.NET webservice that i am creating using the DAL-BLL architecture for my final school project.I have a stored procedure, which is a select query with an inner join for 2 tables.Hence the stored procedure returns multi-table value. One of my DAL tableAdapter methods accesses this stored procedure. How do i retrieve the return value in the BLL? Do i have to create a class structure similar to the one supposed to be returned by the stored proc? or is there a direct way to achieve the same?
Here is some more information:I am using the SQL dataset (.xsd) in DAL. So i have a datatable called "Insurance", which has a tableAdapter. One of the queries in the adapter references to a stored procedure, which has an inner join. So my SP looks like:
ALTER PROCEDURE dbo.GetInsurancesPaged
(
@startRowIndex int,
[code]...
View 2 Replies
Sep 29, 2010
I am inserting data into Employee table using stored procedure.In employee table EmpNo is identity column.Once i insert data into table stored procedure should EmpNo i.e identitycolumn value.
correct my stored procedure to returm EMpNo Identity column after inserting row.
alter procedure SAR_Sp_AddEmployee(@EmpName varchar(10),@CampaignID int,@startDate datetime) as insert into EmpMaster values(@EmpName,@CampaignID,@startDate)
View 5 Replies
Mar 24, 2010
I'm not so familiar with stored procedures but I'm interesting in moving most of my web selects to stored procedures. I'm working with .net based website and all my data access is something like this:
[Code]....
But now I want to improve some process and make tunings. For that I want to use stored procedures, so instead of the "SELECT ...." sentence I'll put stored procedure name. My problem is how to return a table from one.
View 3 Replies
Jun 22, 2011
I have three XML files that are auto-generated and placed into my wwwroot directory. From there, I need to be able to search through these XML files looking for a record by either first name or last name. So, I have three xml files: a_results.xml, b_results.xml, and c_results.xml.
I'm having trouble reading / scanning these files so I really need some hand holding here. Very novice ASP/asp.net programmer here. Basically, I want a "search page" where the user will enter their search criteria into a text box (either first or last name) and the page will search the first and last name fields in all three of my xml files and return the results in a table, including the resulting first and last names plus their extension number.here is an example of one of the xml files
Code:
<response method="switchvox.extensions.search">
<result>
<extensions page_number="1" total_pages="1" items_per_page="500" total_items="3">
<extension number="1111" status="1" can_dial_from_ivr="1" account_id="1446" display="John Smith" date_created="2009-12-23 11:57:36" type="sip"
[code]....
So, as an example... I go to the page - enter "test" into the search box and click "find". The page should search all three xml files for the word "test" in the first OR last name fields and then return ALL of the combined results in a table which shows first name, last name, location and extension number (all available in the XML file(s) as shown above).
View 2 Replies
Nov 25, 2010
I need to pass a table type parameter to a user-defined table valued function in SQL Server 2005.How would I do this?
My function name is udf_t_GetSales ( @financialYearMonthsData as table)
The table @financialYearMonthsData has 3 columns ( MonthId int, DisplayText nvarchar(500), CalendarYear int)
View 7 Replies
Dec 10, 2010
my main intention is that, the exsisting table of sql server database(.dbo) with 1000's of records, that should be import to a new access database table(.mdb).for example if we want to had a new table in db2, of exsisting table in db1 with some conditions by using "select * into New_Tabel from (select * from Exsisting_Table where <Condition>) as objectName". Here the new table is created and records inserted in one execution in db2. The same work should be done for access(sqlserver db --> Access db).Here the new access database table with given name (as string_sysdate) must be created dynamically by clicking a button (multiples time creating new table).Is there any query or c# code for sql server database to access database.
View 2 Replies
Jan 1, 2010
I have a page that lists products from a table based on the querystring. So if I say foo.aspx?fam=1 all the products from family 1 will be listed. How can I make my code list all the values if query string is empty? My SQL command would have to be different...can't really see how I can do this.
<asp:SqlDataSource ID="ds_produtos" runat="server"
ConnectionString="<%$ ConnectionStrings:LocalSqlServer2 %>"
SelectCommand="SELECT DISTINCT [IdProduct], [Name], [Description], [IdFamily], [Price], [Stock] FROM [Product] WHERE ([IdFamily] = @IdFamily )">
<SelectParameters>
<asp:QueryStringParameter Name="IdFamily" QueryStringField="fam" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
View 2 Replies
Jan 18, 2011
How to return count of true/ false in a column of a table. I have a table in sql containing 5 columns with bollean type. Now I have to return the number of trues and falses in each column and display on my frontend.
View 1 Replies
