this is my script
SELECT * FROM
( SELECT 'OK' AS RESULT,'Done' AS MSG ) A
FOR XML RAW('COLLECTION'),ELEMENTS
the result would be
<COLLECTION>
<RESULT>OK</RESULT>
<MSG>Done</MSG>
</COLLECTION>
would it possible the output as this format ( to add extra tag <H></H>)
<COLLECTION>
<H>
<RESULT>OK</RESULT>
<MSG>Done</MSG>
</H>
</COLLECTION>
Here is my stored proc
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
Create PROCEDURE [dbo].[sp_GetNextSeq] (
@p_NextSeqNo int = NULL OUTPUT
)
AS
BEGIN
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRANSACTION
Generate Next Sequence Number
[code]...
First off, suggest better ways if you want rather than patch up this code. I am just starting this project and it is first time I have tried to code a web site so anything you suggest is very much welcomed. I have spent the last 2 and 1/2 days trying to find workable answers to this but none I have found and tried seem to fit. If needed I can email screens shots or code. I am trying to construct a website that will have the same main theme throughout as far as the header, navbars sitemap, and footer go. Naturally the content will vary from page to page. I want to use a single master page and css stylesheet for this main theme and I will change the content format as needed per page because each page may vary somewhat.
However, about 15 of the pages will all use the same format for their content and this format will differ from the rest of the site but the format of the main theme will stay the same. So I am trying to create a nested master page to use to format the just the content area for all these pages while retaining the main theme for the header, etc.. I believe I should use a separate css file with the nested master page to handle the formatting of the content areas for these 15 pages. I have code that looks like it works when viewed in web developer but design view but does not work when viewd through a browser (IE, Chrome, Firefox). So far I have the following done in web developer.
If it helps the code and screen shots follow. Master Page called "Parent.master". For all theme throughout site Nested Master Page called "Lab.master". For the 15 like pages Primary stylesheet file for main theme called "StylesheetNew.css" For site theme Secondary stylesheet file to syle the 15 like formatted pages. It is called Labmaster.css Labs.apsx file to use as first of the 15 like pages.
Finally screens shots from web developer and browser. Sorry try as I might I could not capture screenshots and put them into this post. The problem is that web developer shows all the area (many lines high) with gray background and with the XXX text that I want to allocate for content in the 15 pages. Yet all the browser show is one line of text o a white background followed by the footer. It looks like the LabStyleSheet works in Web Developer but not in a browser.
Parent.master
<%@ Master Language="VB" CodeFile="Parent.master.vb" Inherits="MasterPage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "[URL]">
<html xmlns="[URL]">
<head id="ParentHeader" runat="server">
<title>HX5</title>
<asp:ContentPlaceHolder runat="server" id="headerPlaceHolder" />
<link href="~/StyleSheetNew.css" rel="stylesheet" type="text/css" />
</head>
<body>
<form id="form1" runat="server">
<div id="wrapper" >
<div id="Header" >
<table class="hdrtbl1" >
<tr>
<td id="hdrtd1" style="width:175px; height:100px;" >
<img id="logo" alt="Logo" src="../Images/logo.png" style="width: 136px; height: 87px" />
</td>
</tr>
</table >
<table class="hdrtbl2" >
<tr><td id="hdrtbl2td1"><b> Providing Professional Technical, Manangement and Business Solution</b></td></tr>
<tr><td id="hdrtbl2td2"> <b> Services since 2004 </b></td></tr>
<tr> <td id="hdrtbl2td3" align="center" ><img id="rdln" alt="RedLine" style=" height:3px;" src="../Images/RedLine.png" /></td></tr>
<tr><td id="hdrtbl2td4" > <b>Committed to Excellence In All We Do</b></td></tr>
</table>
</div>
<div id="navbardiv">
<ul id="topnav">
<li><a href="../pages/about.aspx" >About Us <img style=" border: none; " src="../Images/arrow-down.gif" /></a>
<!--Subnav Starts Here-->
<span>
<a style="font-weight:lighter; " href="#" >Who We Are </a> |
<a href="#">Locations</a> |
<a href="#">Business Classifications</a> |
<a href="#">Contact Us</a> |
</span>
</li>
<!--Subnav Ends Here-->
<li><a href="../pages/services.aspx">Services <img alt="arrow" style="border: none; " src="../Images/arrow-down.gif" /></a>
<!--Subnav Starts Here-->
<span>
<a style="font-weight:lighter; " href="#" >Capabilities</a> |
</span>
<!--Subnav Ends Here-->
</li>
<li><a href="#">Customers <img style=" border: none; " src="../Images/arrow-down.gif" /></a>
<span>
<a style="font-weight:lighter; " href="#" >Subnav Link</a> |
<a href="#">Customer Locations</a> |
<a href="../pages/labs.aspx">Labs</a> |
</span>
</li>
<li><a href="#">Careers <img style=" border: none; " src="../Images/arrow-down.gif" /></a>
<!--Subnav Starts Here-->
<span>
<a style="font-weight:lighter; " href="#" >Joining the HX5 Team</a> |
<a href="#">Current Opportunities</a> |
</span>
</li>
</ul>
</div>
<div id="subnavbar" >
<!-- <asp:SiteMapPath ID="SiteMapPath" runat="server">
</asp:SiteMapPath> -->
</div>
<div id="topContent" style="border-bottom:solid 1px #191970;">
<table>
<tr><td style="height:30px; width:900px;" >
<asp:ContentPlaceHolder id="TopPlaceHolder" runat="server">
</asp:ContentPlaceHolder>
</td>
</tr>
</table>
</div>
<!-- <div id="mainContent"> -->
<asp:ContentPlaceHolder id="MainPlaceHolder" runat="server" />
<!-- </div> -->
<!-- <div id="lowerContent"> -->
<asp:ContentPlaceHolder id="LowerPlaceHolder" runat="server">
</asp:ContentPlaceHolder>
<!-- </div> -->
<div id="footerContent" style=" height:50px; width:900px; text-align: right; background-color: #ccc; ">
<span style=" font-family: Arial, Helvetica, sans-serif; font-size: xx-small; font-weight: bold; color: #000080; margin: 30px 20px 0px 0px;"> Copyright 2010 HX5, LLC All rights reserved</span></div>
</div>
</form>
</body>
</html>
Can any one please guide, how to bring this output.Below one is Sample Data
[Code]....
I had an sqldatasource. I had set its parameter as follows
[Code]....
[Code]....
Above is dynamic sql and when it is executed by sp_executesql then I got output as as xml. If I want to store that XML in a variable. So then what I need to add in my tsql script.
I am trying to return a sum total figure from a stored procedure by using the output parameter. When I execute the stored procedure in SQL it returns 0 or a valid number like it should but when I try to use the webmethod listed below I keep getting a 0 even when I should get a valid number back.
ALTER PROCEDURE spGetCustSum
@CustomerCode CHAR(4),
@Sum AS INTEGER OUTPUT
AS
BEGIN......
Am I missing a step or have some wrong code in this method?
how do I add an output parameter to a Stored Procedure that returns a code or string to the calling app
View 1 Repliesusing sql server 2005.I need to output the results of a query to a csv file, how should i do this?
View 2 Repliesi want to get first picture of any album in photo table. i want get output table for show to the datalist control.i need to get albumid in output
so i create a sproc similar this:
create PROC USP_GETFirstPhoto
@ALBUMID INT OUTPUT,
@CATEGORY NVARCHAR(50) OUTPUT ,
@CAPTION NVARCHAR(50) OUTPUT
AS
SELECT @ALBUMID = A.AlbumID,@CATEGORY=A.Category,@CAPTION=TMP.Caption FROM Albums A
CROSS APPLY
( SELECT top 1 * FROM Photos
WHERE AlbumID=A.AlbumID
)TMP
order by A.AlbumID
DECLARE @x INT,@y NVARCHAR(50),@z NVARCHAR(50)
EXEC USP_GETFirstPhoto @x output,@y output,@z output
select @x,@y,@z
but when i exec this proc i have a recorde not a result set
with this query i have resultset
SELECT * FROM Photos
CROSS APPLY (
SELECT TOP 1 AlbumID FROM Photos
GROUP BY AlbumID)TMP
I have never used stored proc ouput parameters i want to know what is the use of using output parameters?If possible provide me some code.
View 10 RepliesI'm just now getting familiar with the .NET chart controls. I'd like to know if I can save the contents of a chart as a .jpg or similar file on the server.
I would like to be able to have the user download the file or display it to the user in a non-.net page.
I am using SQLCMD to execute a script and then output the results to a csv file. Is it possible to name the output file with a timestamp each interval that it is executed (such as every 30 minutes that the command is executed to timestamp like "output 10/25/10 830.csv"?
View 2 RepliesI have written SP like this to get my required output.create procedure [dbo].[usp_gl_ProjectBudgets] set nocount on begin tran declare @SPError int
declare @y1 varchar(20)
declare @y2 varchar(20)
declare @y3 varchar(20)
declare @y4 varchar(20)
declare @y5 varchar(20)
declare @Glink int
declare @i int
set @y1='Year1'
set @y2='Year2'
set @y3='Year3'
set @y4='Year4'
set @y5='Year5'
set @Glink=1
set @i=1
[code]...
We had a simple Gridview that displayed a column list as Linkbuttons but we now need to display three columns as one, so I wrote a simple stored procedure to do it. However, the output in the Gridview shows duplicates and is not in order even though I specifySELECT DISTINCT in the result select as shown below.
ALTER PROCEDURE [dbo].[GetGeneralAction]
Add the parameters for the stored procedure here
AS
BEGIN
SET NOCOUNT ON;
CREATE TABLE #TempTbl (GeneralAction varchar(300) )
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action]
FROM [dbo].[Formulary2011]
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action2]
FROM [dbo].[Formulary2011]
[code]...
I have a GridView sourced by a SQL Server stored procedure with several databound fields, including a money column for item values. My stored proc returns the data through a SELECT and everything looks good. The stored proc also has a single output parameter that sums the total value of the displayed data, and this value is displayed in a label above the GridView.
View 7 RepliesI am getting always output parameter values null albeit in stored procedure I assigned output param values to 2.both of (MYTOTAL,MYPER) should return 2 but always null.
some code to attempt retrieving multiple output values
[Code]....
I've got a requirement to add a feature that will save off a dynamically created asp.net page so it can be recalled and reviewed at a later date. I was thinking of just adding a 'Save' button to the page and in the code-behind using VB to write the output HTML to a varchar(MAX) field in my database.Does anyone know how (in VB) to grab the entire page HTML so it can be inserted into a database?
View 6 RepliesIn my database when anyone registers - By default the registration time is saved as UTC universal time zone.
But i want to display everything on the website in (GMT-05:00) Eastern Time (US & Canada)
I am using this SQL QUERY to display registration date:
SELECT TOP (5) Username, CustomerID, RegistrationDate = CONVERT(VARCHAR(12),RegistrationDate,107) FROM Customer ORDER BY RegistrationDate DESC
And, i am displaying it like this:
<asp:Label ID="nameLabeldate" runat="server" Text='<%# Eval("RegistrationDate") %>' />
The problem is the output is getting displayed as : 10/20/2010 1:36:01 PM
I know RegistrationDate is datetime stamp that's why i am getting output in this format.
But i want to display RegistrationDate as: Oct 20, 2010 at 1:36pm -> according to (GMT-05:00) Eastern Time (US & Canada) ORDER BY RegistrationDate in Desc (top most will be last registered user)
I've modified an existing strored procedure. It originally had one ouput parameter in the stored proc and it was set up as follows in the c# code that called it:
cmd.Parameters.Add("@Var1Param", SqlDbType.BigInt);
if (Var1 == 0)
cmd.Parameters["@Var1"].Value = DBNull.Value;
else
cmd.Parameters["@Var"].Value = Var1;
cmd.Parameters["@Var1"].Direction = ParameterDirection.InputOutput;
cmd.ExecuteNonQuery();
// Get Var1
Var1= dataMorph.ToInt64(cmd.Parameters["@Var1"].Value.ToString());
Just to clarify, this parameter was declared as OUTPUT in the stored proc but as inputoutput in the C# code. This worked fine. I have added another parameter to the same stored procedure and I want to retrieve both from the C# code. The C# code now is as follows:.................................
I have created a server control which uses recursion to create a menu. It essentially outputs nested lists with anchors inside them.
Now, this works perfectly, however, since the control is calling itself to render the child menus, it is also rendering multiple identical WebResource.axd javascript file references in .
how to stop this from happening? I just want the one reference in my tag.
I am creating a nightly process using a stored procedure to check for expiring records and emailing myself and the folks that need to see the information. The trouble I am having is trying to send the data in table "like" view in the message body.Here is the Proc you can see the point at which i try to use a table vairble then use it as a parameter for calling the email proc but it doesn't seem to work.
View 5 RepliesIf I have an upload control that uploads mp3's to a file on my server and stores user specific information of the uploader in my SQL database, is it possible to output the songs in the mp3 folder to an XML query string or xml file through SQL server management studio?
View 2 Repliesi want to return two output parameter n temp table from sql server stored procedure
View 6 RepliesI'm trying to figure out how add extra logic to this derived column expression:
LEN(TRIM(pup_date)) == 0 ? NULL(DT_DATE) : ((DT_DATE)(SUBSTRING(pup_date,5,2) + "-" + SUBSTRING(pup_date,7,2) + "-" + SUBSTRING(pup_date,1,4)))
If there's a 0 in the field the code inserts a null. Otherwise it inserts a date. How can I change this to insert a NULL if a question mark "?" appears in the column?
This is what I tied using the OR operator but it's not working:
LEN(TRIM(pup_date)) == 0 || LEN(TRIM(pup_date)) == "?" ? NULL(DT_DATE) : ((DT_DATE)(SUBSTRING(pup_date,5,2) + "-" + SUBSTRING(pup_date,7,2) + "-" + SUBSTRING(pup_date,1,4)))