I have asp.net application using .net 3.5 running in our domain (intranet). Right i am using only Form authentication to this appliation.
Problem. Is there a way to use Widows and Form authentication both at once. By default it will use the Windows Credentials if the applicatin is running in the domain. If failed it should ask for Form authentication to supply credentials.
Form / Windows authentication?
View 3 RepliesI have developed an Interanet web application using the windows Active directory authentication if user find then it automaticaly authenticated working correctly now my user wants the capability of being able to login to the intranet site as another user by providing the username and Password . For example, Team lead needs to login on other team memeber System to pefrom some task on his behalf if he or she is not aviable in office .
I have created a standard MS Login Page. However when I try to login on the page only by providing the Username system authenitcate the user ( not validating the password of that user)
My Web.config is shown below
[Code]....
I have created an Intranet site using windows authentication based on role membership. It is working great. My Web.config is shown below.
<authentication mode="Windows" />
<roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider" />
<authorization>
<allow roles="D820Developers, D820IT, D820Staff, D820Providers, D820Supervisors, D820Directors, D820Interns" />
<deny users="?"/>
</authorization>
Now my user wants the capability of being able to login to the intranet site as another user. For example, IT guy needs to login on a user's system to set some data.
I have created a standard MS Login Page. However when I try to login on the page I get the message
Your login attempt was not successful. Please try again
I do not have a database (aspnetdb.mdf) storing user information but login against the active directory. Can you use the login form with windows authentication without a database?
I am developint an Asp.Net MVC3 web application, which will be available over intranet and internet for users.
For this sake I want to use dual authentication (Forms and Windows). Both authentications works perfectly separately.
Kindly let me know how can I enable both authentications for my single MVC3 site. Windows authentication for Intranet and Form based authentication for Internet user.Looking for your kind cooperation.
Just going to start making a web application and was wondering which was better, or at least what are the main differences between them (as it probably matters what I am using them for)?
View 3 RepliesWhat's the difference between Basic Authentication and Integrated Windows Authentication in IIS?
View 3 RepliesI set authentication mode to Windows in the web.config and I enable Windows Authentication and disable the Anonymous Authentication in IIS 7 on win 7, but HttpContext.Current.User is always null.It works fine when I host the web app in IIS 6.0.
View 1 RepliesI have been trying to avoid the windows login userid and password window when I use the Windows Authentication mode for a web site. I need to capture the the windows logon user name without prompting for the user id and password and display that on the web site. I had tried almost everything... changed authentication,security setups on IE and IIS etc... still not being able to avoid the window...
View 1 RepliesWhat do I need to do in order to change an application from Forms Authentication to windows authentication?
View 2 RepliesWe have a working version of application (Intranet) with uses Windows Authentication deployed in Windows 2003. The application uses HttpContext.Current.User.Identity.Name to get the logged-in user. Here impersonate is turned off.Right now, we are move to Windows 2008 RC2 where this Windows Authentication problem arised. I have Digest Authentication and Windows Authentication enabled. And also I have enabled Anonymous Authentication enabled to avoid the Login dialog of IIS in the end-user IE. Now I am getting HttpContext.Current.User.Identity.Name as Empty. When I impersonate using username and password, I am used to login using that user but all the users uses the same user to login.Does any has solution for this?Deployment Server - Windows 2008 RC2 (IIS 7.5)Development - Windows 7 (IIS 7.5)I am new to IIS 7.5. Please give me a solution
View 3 RepliesI am developing one intranet website. Being an intranet application, one of the requirement is to have a single sign on feature.
It means that the windows PC username (i.e the "ctrl + alt + delete" username) is going to be the username for the system.
How do i fetch that username?
I tried the following two ways which are working in debug mode but not on live site.
System.Security.Principal.IPrincipal user = System.Web.HttpContext.Current.User;
Response.Write(user.Identity.Name);
&
Response.Write(Request.ServerVariables["AUTH_USER"].ToString());
Both the above method works when i run the page from visual studio.
However when i run the page from IIS or any other server, it gives me a blank value
I have a web farm web project, and want to make sure windows authentication is working well without any problem in web farm, can any one give me some web sites or information about that?
View 1 RepliesAm going to develop authentication part in the web site. I want my authentication module should not be hacked by any one and also want in secure side.
View 1 RepliesI needed information regarding the capabilities & integration of AzMan tool with Asp.net.Currently, I got a Sharepoint 2007 website along with ASP.NET 2008 where I am using Form Based Authenication.Now, the requirement is any user within a domain registered in AD should be able to login in website through intranet.
Can I acheive this using AzMan, or I need to create two websites one with FBA for internet users and the other one for the intranet users with AD authenication. Also my intenet website is deployed and in use where usermapping and roles are already created, so using this tool what will be the impact on existing webiste.
I have to invoke SSIS packages from web service in the most secure way. I think that windows authentication will be secure but i am not sure. I do not have much knowledge about how to achieve this and the information on the internet is very distributed.
View 1 RepliesWe use Sharepoint to control our websites. We build the sites, then load them into the sharepoint server. My question is if I use windows authentication, how can I get my role security in my web config file to coencide with the asp.net controls that use the Forms authentication. Is there a differenence? Our security uses a session variable for security but there is no where to set up their permissions except in active directory. I hope this makes sense because I would like to implement the LoginView with Role groups but how can I give them the role="administrator"? Do I have to go into active directory and give them these permissions(would take awhile due to the size of the company)? Or do I have to set up priveladges in the web.config file for each user(difficult I think)?
View 5 RepliesI'm writing a simple Intranet application using windows authentication. I want to restrict access to Safe/UCantSeeMe.aspx. I am aware of the AuthorizeAttribute, but this only works on methods. I also found a good post on doing this with the MVC pattern, but I'm not using MVC. This can be done with roles in forms based security. I read on MSDN that using windows based security means roles are based on groups, but it doesn't go into any detail. how can I restrict access to Safe/UCantSeeMe.aspx?
View 1 Repliesi made a web application and i need it to work on a windows mobile system, the thing is that some control don't work the way i planned one thing is that form authentication doesn't work i have two question,
1- do i need to make a smart device project and do the whole program again
2- i need a way to print from this device (HTC TyTN II) to a bluethoot device (DPP-250).
I am trying to get the windows authentication for intranet design Codes return userid of my system but when I try the same fron other system, there too they return only my system's Id.
View 4 RepliesI want to know if this kind of authentication is possible.
We have an Active Directory account and that account we are using to log in to windows. I have a simple system that needs authentication using the IIS log in box (i dont know what do you call this but what I know is it only comes out when Anonymous user is unchecked in the IIS configuration.) Now, I want this box to appear before my page and the user will be authenticated and be compare to the user who logged in to the windows. If the user who have been authenticated is the same as the user who logged in to the windwos then we will let him in if not he must be denied in accessing the page.
The first problem I have in my mind is how to code it in asp.net to make an authentication when he will try to access my page.
Second is, let us say we have succeeded to show the authentication box, how can I get the username from the log in box and compare it to the user who logged on in windows. Of course we can get the user id of the logged in user from the windows using User.Identity.Name but how about the username from the log in box.
Note: I will not use log in forms even using https. Just the log in provided by the IIS according to the configuration.
What I want to do is, if userA access the website, then the website will use userA's token to access the SQL server. Site is an intranet site.In web.config,I have
<authentication mode="Windows"/>
<identity impersonate="true"/>
Connection string:Data Source=sql;Initial Catalog=xxxxxx;Integrated Security=SSPI;persist security info=False;
IIS:Annoymous login is disabled, Windows authenication is enabled.
SQL server:userA is added as a user to the database.
IIS and SQL server are on different server. Running as userA on another computer, I try to access the website. The website log told me the website was trying to login to the SQL server with NT AuthorityAnnoymous despite I specified to use integrated security and Annoymous login is disabled in IIS.
I have an application that ran fine on a Win 2003 box using windows authentication. After installing the app on a 32-bit Windows Server 2008 box the users are now prompted for domain credentials every time they call the site. I went into IIS manager for IIS7 and disabled anonymous authentication and enabled windows authentication. What do I need to do here for the user to not be prompted for the credentials?
View 5 RepliesI am developing one portal in asp.net. Im using windows authentication. In our domain, we are give 6 digit number as username. Based on the 6 digit number windows will display the user name. Can I got the user name from asp.net? Im using asp.net with C#.
When I trying with,
WindowsIdentity.GetCurrent().Name - it will return "DomainName123456". Instead of this 6digit number I need the user name. The user name is displaying in start menu.
What's happening is when windows authentication/authorization fails the user get's a login prompt in IE6, IE7 and FireFox. Only when user clicks Cancel button in login prompt they are getting to 401 error page. What I am trying to achieve is to automatically redirect the user to a custom error page when getting 401 error instead of getting login prompt. Is this possible to suppress the login prompt in this scenario or is it this way by design?Here is my setup:I have windows integrated authentication configured in asp.net 2.0 web app.
[Code]....
In IIS I have website Directory Security configured to use Integrated Windows Authentication and disabled Anonymous Authentication