I've build a PasswordRecovery, but it always returns this error code. What is wrong?
The aspx code:
[Code]....
I don't use any code behind, maybe i sould do? but what, it should work without any coding? The txt file:
Bij deze ontvangt u uw nieuwe wachtwoord:<br><br>
Gebruikersnaam: <% UserName %><br>
Wachtwoord: <% Password %><br><br>
Met vriendelijke groeten
I'm using asp.net's built-in membership provider with security question-and-answer enabled for password recovery against a SQL Server 2005 db. For some users, this works fine and they're able to receive their passwords. For others, and it's not clear what separates the two groups, the security answer is never properly processed. It doesn't matter if the answer is correct or incorrect, the page merely reloads without confirming or denying the request.As for events, VerifyingAnswer is being triggered, but not AnswerLookupError (if answer is incorrect) or SendingMail (if answer is correct). I ran a SQL trace during one instance, and the aspnet_Membership_GetUserByName stored procedure is being called, but nothing else gets called after. I would expect that aspnet_Membership_GetPassword would be called, which passes the security answer as a parameter, but it isn't.
View 2 RepliesI have asked the following question multiple times but did not receive any proper reply.
I have a web page which is using PasswordRecovery control.
Its working fine but I have a scenario in which I have to disable Viewstate for the whole application.
Now after disabling viewstate when I visit the webpage I have noticed that PasswordRecovery controls is not working (Every times when I submit the default button to go to step 2, the postback occur but not moving to step 2).
Is it possible to create a passwordRecovery by the email address instead of the username? A lot of our members forgot their username.
View 1 RepliesI have a PasswordRecovery control set up on an ascx control as shown below. In some cases users have gotten two emails with different passwords sent at the same time. They're insistent that they haven't hit the button twice. I am using the CSSFriendly adapters, so I can take that off and see if it corrects the problem. Otherwise I suppose I could put this on the aspx page rather than a control.
<asp:PasswordRecovery ID="PasswordRecovery1" runat="server"
I am new to asp.net 4.0 and I am having a hard time changing the PasswordRecovery to email instead of username. here is my aspx page (the page won't hit the vb code unless i enter the username not the email)
[Code]....
I'm customizing the look and feel of the PasswordRecovery control. The problem is this. I've already set the "Search" button on my site as the default button. I've noticed that all the buttons used in customizing PasswordRecovery use "Button" as their IDs. So in my Page_Load() event, I tried this.Form.DefaultButton = pr1.FindControl("Button").UniqueID; where pr1 is the PasswordRecovery control. But I keep getting "Object reference not set to an instance of an object" error where I try to set Button as the default button.How do I make sure that the user can actually hit "Enter" to use PasswordRecovery as opposed to having to click the buttons?
View 4 Replies[Code]....
how to make this work (I assume that no code behind is needed to make this work in its simplest form?).After user correctly answers the security question and presses submit, no email is sent. No message is displayed. Nothing. What is missing?
For reasons to long to go in to I have to change the behaviour/appearance of the Success page on our password recovery page.
We've been tasked with making the Success template identical to the UserName template i.e. with a label and text box for UserName and identical messages on both pages.
Basically our client wants no difference between successful password retireval and failure - the same message will display regardless e.g. "An email has been sent to <username> with your password."
Which reminds me - in the success/failure message they'd like the entered UserName to appear but I can only get it to appear if it's a valid username - if it's nonsense the UserName is blank.
I am using passwordrecovery control.
After entering username and keying enter key(from keyboard) it was not firing submitbutton_click event. So i have added defaultbutton property in the panel control, and it is working fine. And my problem here is..
Clicking on submit button it is showing security question. After answering the security question, i have to click on the submit button either by mouse click or tab enter.
What i need to do is.. after answering the security question, I should be able to hit enter key instead of mouse clicking on submit button.
I have a web page which is using PasswordRecovery control.
But I have a scenario in which I have to disable Viewstate for the whole application.
Now after disabling viewstate when I visit the webpage I have noticed that PasswordRecovery controls is not working (Every times when I submit the default button to go to step 2, the postback occur but not moving to step 2).
Is there any easy way of setting a failure text within the PasswordRecovery control?
I want to be able to notify users that there was a problem with sending an email. Is there a failure - counterpart to the SuccessTemplate i can use or is there any other template/control within the passwordRecovery control whose value can be set in a handler to the onsendmailerror event?
(Please don't send MSDN links to PasswordRecovery or onsendmailerror, i've read them)
Is it possible to use the PasswordRecovery control to recover a password using the email address instead of the user name?
Ideally I'd like to have the PasswordRecovery control allow users to enter their email address instead of their user name and then proceed to answer the security question.
I use master/content page and use this code (below) for validation, if I place the PasswordRecovery outside LoginView the validation is marked up correctly, but placed back inside the LoginView the PasswordRecovery compilation error is CS0103: The name 'PasswordRecovery1' does not exist in the current context.
[code]....
I have configured Forms Authentication in my web config file as below.
Following is my code
[Code]....
The issue is that FormsAuthentication.Authenticate never returns true. This is a very simple website with only two pages and no other code(The code too was copied from MSDN).
[Code]....
It seemed to be the right place to post to.My problem is that when I try to read registry key, I get null value, even if it exists (regedit shows it exists).Application is windows service with Log On As Local System and registry key im trying to read is in HKEY_LOCAL_MACHINESOFTWAREClassesCLSIDOn my development machine (x64 win7) it works fine. But in live server (x64 windows server 2008 r2) I get NULL.ese operating systems should have similar policies or does Local System on server 2008 have any restrictions i should know about?
View 1 RepliesOur web application hosted from windows 2003 server, is trying to access a file present in a shared folder of another windows 2003 server. The path for the shared folder is configured in the webconfig file in the below format.
<add key="ReportPath" value="\<Server_Name>Reports"/>
if (!File.Exists(ReportPath))
/ Show the report in a link
This function File.Exists() always returns false and when I try to remove the check, it returned the exception, "Logon failure: unknown username or bad password."
And I realise that a user/member can have mutlple roles.HOW Can I do a select SQL query that returns the result set like this (SQL 2005)
SELECT Roles FROM <tbl>
WHERE UserID = <GUID>
AND Roles IN ('AA','CC')
when ever i check User.Identity.AuthenticationType the returned string is 'Custom' always, doesn't matter my authentication type is 'Windows' or '''Forms'.
I want to do some different coding in aspx.cs for windows and forms authentication, but i am unable to differentiate between them because 'User.Identity.AuthenticationType' always returns 'Custom'.
I'm trying to encrypt some userData to create my own custom IPrincipal and IIdentity objects using Forms authentication - I've serialized an object representing my logged in user to Json and created my FormsAuthentication ticket like so:
string user_item = GetJsonOfLoggedinUser();/*get JSON representation of my logged in user*/
System.Web.Security.FormsAuthenticationTicket ticket =
new System.Web.Security.FormsAuthenticationTicket(1,
WAM.Utilities.SessionHelper.LoggedInEmployee.F_NAME + " "
+ WAM.Utilities.SessionHelper.LoggedInEmployee.L_NAME,
DateTime.Now, DateTime.Now.AddMinutes(30), false, user_item);
string encrypted_ticket = System.Web.Security.FormsAuthentication.Encrypt(ticket);
HttpCookie auth_cookie =
new HttpCookie(System.Web.Security.FormsAuthentication.FormsCookieName, encrypted_ticket);
Response.Cookies.Add(auth_cookie);
However, the string encrypted_ticket is always null. Is there a limit on the length of the user_item string?
2 server web farm windows 2008 r2 nlb. In IIS I enable windows authentication all other authentication is disabled. Code behind
[Code]....
web.config
[Code]....
The code returns the application pool custom account e.g. DOMAINWebApp_user. What I want is the logged in user's username. How do I get this?
I have a page where, when the user has successfully logged in, I store some values in the session.
I then use these values to load an application list page. This page is automatically refreshed after 20.1 minutes, with the sessionstate timeout and forms timeout in web.config set to 20 minutes (with sliding expiration). This means, if the user does not use any page for more than 20 minutes, he is timed out.
My problem is that the User.Identity.IsAuthenticated sometimes returns true, when the session has expired.
Why is this happening, and how can I fix it?
I have strange problem with the membership provider on my mvc application.
I have a webforms page inside admin folder which calls the following code in the models directory.
public int SaveUploadedFile(HttpPostedFileBase fileBase)
We have just migrated our application from VS 2008 to VS 2010 and our database from Sql server 2005 to 2008. Everything was working great until i tried to login to the site.
As when i try to log into the site, i am surprisingly always getting "FALSE" from Membership.Validateuser (). I goggled it and now i know i am not the alone victim of this irritating bug. Our live site is going to be down...
[Code]....
returns the error: The parameter 'username' must not be empty.Parameter name: usernameI want to check if a user is logged. If not logged in redirect to loginerror.aspx.