[Code]....
how to make this work (I assume that no code behind is needed to make this work in its simplest form?).After user correctly answers the security question and presses submit, no email is sent. No message is displayed. Nothing. What is missing?
I am using passwordrecovery control.
After entering username and keying enter key(from keyboard) it was not firing submitbutton_click event. So i have added defaultbutton property in the panel control, and it is working fine. And my problem here is..
Clicking on submit button it is showing security question. After answering the security question, i have to click on the submit button either by mouse click or tab enter.
What i need to do is.. after answering the security question, I should be able to hit enter key instead of mouse clicking on submit button.
I have an aspx page with many buttons and i have a search button whose event i want to be triggered when user press enter.How can i do this?
View 4 RepliesI'm using asp.net's built-in membership provider with security question-and-answer enabled for password recovery against a SQL Server 2005 db. For some users, this works fine and they're able to receive their passwords. For others, and it's not clear what separates the two groups, the security answer is never properly processed. It doesn't matter if the answer is correct or incorrect, the page merely reloads without confirming or denying the request.As for events, VerifyingAnswer is being triggered, but not AnswerLookupError (if answer is incorrect) or SendingMail (if answer is correct). I ran a SQL trace during one instance, and the aspnet_Membership_GetUserByName stored procedure is being called, but nothing else gets called after. I would expect that aspnet_Membership_GetPassword would be called, which passes the security answer as a parameter, but it isn't.
View 2 RepliesHow can I set Focus to a TextBox while Button click event is fired using Default Button when enter key is pressed. Here is my Page and code.
<%@ Page Title="" Language="C#" MasterPageFile="~/mpChat.master" AutoEventWireup="true" CodeFile="FocusTest.aspx.cs" Inherits="FocusTest" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Panel ID="Panel1" runat="server" DefaultButton="Button1">
<asp:TextBox ID="TextBox1" runat="server">
</asp:TextBox>
<asp:Button ID="Button1"
runat="server" Text="Button" onclick="Button1_Click" />
</asp:Panel>
</ContentTemplate>
</asp:UpdatePanel>
</asp:Content>
using System;
public partial class FocusTest : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
TextBox1.Focus();
}
protected void Button1_Click(object sender, EventArgs e)
{
TextBox1.Text = "";
TextBox1.Focus();
}
}
I have asked the following question multiple times but did not receive any proper reply.
I have a web page which is using PasswordRecovery control.
Its working fine but I have a scenario in which I have to disable Viewstate for the whole application.
Now after disabling viewstate when I visit the webpage I have noticed that PasswordRecovery controls is not working (Every times when I submit the default button to go to step 2, the postback occur but not moving to step 2).
Is it possible to create a passwordRecovery by the email address instead of the username? A lot of our members forgot their username.
View 1 RepliesI have a PasswordRecovery control set up on an ascx control as shown below. In some cases users have gotten two emails with different passwords sent at the same time. They're insistent that they haven't hit the button twice. I am using the CSSFriendly adapters, so I can take that off and see if it corrects the problem. Otherwise I suppose I could put this on the aspx page rather than a control.
<asp:PasswordRecovery ID="PasswordRecovery1" runat="server"
I am new to asp.net 4.0 and I am having a hard time changing the PasswordRecovery to email instead of username. here is my aspx page (the page won't hit the vb code unless i enter the username not the email)
[Code]....
I'm customizing the look and feel of the PasswordRecovery control. The problem is this. I've already set the "Search" button on my site as the default button. I've noticed that all the buttons used in customizing PasswordRecovery use "Button" as their IDs. So in my Page_Load() event, I tried this.Form.DefaultButton = pr1.FindControl("Button").UniqueID; where pr1 is the PasswordRecovery control. But I keep getting "Object reference not set to an instance of an object" error where I try to set Button as the default button.How do I make sure that the user can actually hit "Enter" to use PasswordRecovery as opposed to having to click the buttons?
View 4 RepliesI've build a PasswordRecovery, but it always returns this error code. What is wrong?
The aspx code:
[Code]....
I don't use any code behind, maybe i sould do? but what, it should work without any coding? The txt file:
Bij deze ontvangt u uw nieuwe wachtwoord:<br><br>
Gebruikersnaam: <% UserName %><br>
Wachtwoord: <% Password %><br><br>
Met vriendelijke groeten
I have 2 SUBMIT button in a form one is display:hidden and one is display:block if user click on SUBMIT button (display:block) then another SUBMIT button {display:hidden} should also submitted.
View 2 RepliesFor reasons to long to go in to I have to change the behaviour/appearance of the Success page on our password recovery page.
We've been tasked with making the Success template identical to the UserName template i.e. with a label and text box for UserName and identical messages on both pages.
Basically our client wants no difference between successful password retireval and failure - the same message will display regardless e.g. "An email has been sent to <username> with your password."
Which reminds me - in the success/failure message they'd like the entered UserName to appear but I can only get it to appear if it's a valid username - if it's nonsense the UserName is blank.
In ASP.NET when we have multiple input section with required field validator (Like on header for login with userid & Password is required and second on footer for subscription) when we click on subscription login section's userid required field validator activates and say userid required & i can not submit subscription.
when i submit subscription details login section should not have concern with this. how to avoid this conflicts.
I have a web page which is using PasswordRecovery control.
But I have a scenario in which I have to disable Viewstate for the whole application.
Now after disabling viewstate when I visit the webpage I have noticed that PasswordRecovery controls is not working (Every times when I submit the default button to go to step 2, the postback occur but not moving to step 2).
Is there any easy way of setting a failure text within the PasswordRecovery control?
I want to be able to notify users that there was a problem with sending an email. Is there a failure - counterpart to the SuccessTemplate i can use or is there any other template/control within the passwordRecovery control whose value can be set in a handler to the onsendmailerror event?
(Please don't send MSDN links to PasswordRecovery or onsendmailerror, i've read them)
I have a button, which when presses populates a grid with data. If I add an ObjectDataSource, and bind the grid to it, it will populate the grid when the page loads. But I need to populate the grid only if the button is pressed, because it is a lengthy operation.
View 1 RepliesIn C#/Asp.net I have 2 submit button i.e.
btnOk and btn_Submit
Initially I am doing validating form by clicking on btnOK and in btn_Submit I am inserting record into table. I again want to call btn_Ok event in btn_Submit click event for re-checking validation, if it validates properly thne rest of code of btn_submit should work.
Is it possible to use the PasswordRecovery control to recover a password using the email address instead of the user name?
Ideally I'd like to have the PasswordRecovery control allow users to enter their email address instead of their user name and then proceed to answer the security question.
In my app, there is a grid that you can drill down. You can go back to prev view via some links but the back bowser button is not integrated to that, so that if you do hit the back browser button, it logs out of the app which I don't want. I would be happy if it would redirect to the first page. I think this part is what we need. [URL] this is the startpage.xaml, at the end there is the hyperlink - so maybe here I can see if the back browser is pressed ( there is no other place in the codes that would navigate out), and if this is pressed I can redirect to a different spot? Is this a sound idea and how do I check if this back browser has been pressed?
<HyperlinkButton Content="Logout"
I have buttons contained within a repeater. A ModalPopupExtender is used to confirm event for each button. I create standard panels outside of the repeater and I attach each button in the repeater to these panels from inside the repeater. The problem is once the button is pressed in the popup I can't figure out how to determine which row of the repeater to edit as I can't figure out how to identify which button was pressed.Panel:
<asp:Panel ID="pnlRemoveAlert" runat="server" >
<h1 align="center">Remove Phone</h1>
<asp:Button ID="butRemove" runat="server" OnCommand="Handle_Click" CommandName="Remove" Text="Continue"/>
[code]...
I am CustomValidator to vlidate some data.There are 3 static buttons and some dynamically creating buttons in that page. I just need to check validation when I press the save button.For all other button click I do not want to call the validation. How do I tell that in the Validation function?
<asp:CustomValidator ID="CustomValidator1" runat="server"
ErrorMessage="CustomValidator" ControlToValidate="DropDownList1"
ClientValidationFunction="MyCustomValidation" ></asp:CustomValidator>
function MyCustomValidation(objSource, objArgs)
{
/Proceed if the control pressed is cmdSave button.
var Specialty = document.getElementById("DropDownList1").options[document.getElementById("DropDownList1").selectedIndex].text;
if (Specialty == "Select an option")
{
objArgs.IsValid = false;
}
else
{
objArgs.IsValid = true;
}
}
Sample Code.
<asp:DropDownList ID="MediaTypeDDL" Width="306px" ToolTip="Select Media Type" runat="server"></asp:DropDownList>
<asp:DropDownList ID="MediaFormatDDL" Width="306px" ToolTip="Select Media Format" runat="server"> </asp:DropDownList
<asp:Button
ID="btnUpload"
runat="server"
OnClick="btnUpload_Click"
Text="Upload"
/><br
/>
protected void btnUpload_Click(object sender, EventArgs e)
{
String strMediaFormat = MediaFormatDDL.SelectedItem.ToString(); // Not seeing value here!
}
Item Selected in MediaTypeDDL determines values in MediaFormatDDL. I'm using Javascript to populate MediaFormatDDL. This is working. I now select the item I want from MediaFormatDDL. That works The problem I'm seeing occurs when I press the button to save the values from
the screen. I don't see the Item I selected from MediaTypeDDL. All the other fields are okay. This must be someThing simple, but I'm not seeing it.
First of all, I'm sorry if I don't describe my problem so well, English is not my first language. I'm working on a project where after the user has pressed a button, the button goes invisible and a label control should say "In 20 mintes you may press the button again". The problem is that if the user presses the button before the current hour is almost over, then he will be able to press the button again. The way I compare the time is by placing th current time, which the user presses the button in a sqldatabase table row for that user. This is my code for the moment for showing the user how long he has to wait:
DateTime TimeSincePressedbutton = Convert.ToDateTime(user.timeSincePressedButton); //value from database
TimeSincePressedbutton.AddMinutes(20.00);
TimeSpan d = DateTime.Now.Subtract(TimeSincePressedbutton);
int dd = Convert.ToInt32(d.Minutes);
int timeLeft = 20 - dd;
ValPointsTitle.Text = "In " + timeLeft.ToString() + " minutes you may press the button again";
and the code I have for comparing time with the time now, is to see if the user may press the button again (which I know is wrong, just cant figure out how to fix it, the reason I compare hour, day, month, year etc is because if the user doesnt show up online the same day, maybe he comes back after a couple of days, or next month, or next year).
if (timeLeft <= 0 && DateTime.Now.Hour == TimeSincePressedbutton.Hour || DateTime.Now.Hour > TimeSincePressedbutton.Hour || DateTime.Now.Day > TimeSincePressedbutton.Day || DateTime.Now.Month > TimeSincePressedbutton.Month || DateTime.Now.Year > TimeSincePressedbutton.Year)
{
//button becomes visible and the user may press it again
}
I have a form with several submit buttons. I would like the button's click events to fire when enter is pressed based on which textboxes currently have focus. I am able to specify one button using the code below by adding the onkeydown event to the body of the page and checking for Enter's keyCode
<body onkeydown="if(event.keyCode==13){document.getElementById('btnSearch').click();}">
</body>
I assume this code can be modified or call a function to perform a conditional to see if txtSearch or txtSubmit has focus and specify btnSearch or btnSubmit accordingly, but I am not experienced with javascript.