Setting Up 301 Redirects With Dynamic URLs?
Mar 1, 2010
I'm guessing this is actually an impossible task, but I thought I'd run it by StackOverflow to see if I'm wrong. Basically we have some dynamically created URLs for SEO purposes (around 300,000+ of them) and we want to do 301 redirects to them.
Our current URLs look like this:
http://www.site.com/<Brand>/<Product Name>/<productGuid>
Our old URLs looked something like this:
http://www.site.com/productpage.aspx?productGUID=<productGuid>
Google still has a load of the old URLs indexed, but we obviously want them to know that they should be replaced with our newer ones (and that it's not just duplicate content), hence the 301 redirects.
Our problem is that the <Brand> and <Product Name> parts of the new URLs are obviously dynamically created... making it impossible to create 301 redirects for them.
View 2 Replies
Similar Messages:
Oct 24, 2010
i just have asp.net mvc 3 beta installed, and i get an issue with loginUrl.
my little project works fine with asp.net mvc 3 preview, but now it always ignores my loginUrl setting in web.config and always redirects me to ~/Account/Login.
i follow the instructions, install WebPages first then mvc 3 beta.
View 2 Replies
Aug 12, 2010
i want to convert my dynamic urls to static urls.
I dont have apache installed on my server so it cant be through .htaccess re-write.
Here is the example what i want :
[URL]
I want to change all odds.asp pages to static URLs.My previous posts and new posts too.
Here is my odds.asp file
[URL]
View 1 Replies
Jun 3, 2010
i have a website that generates urls dynamicly.(?Department=1&Category=4&Page=2) then i rewrite the url to (Phone-d1/Sony-Ericsson-c4/)
I have hunderds of products so how do i create a sitemap for this, or should i doit only for the Departments, if so how would i do it.
View 2 Replies
Feb 7, 2011
Does anybody knows how to detect outgoing URL from dynamic flash Object data ? I have some Flash widgets from other sites that contain realtime dynamic data with urls to their site. I want to open those url using popup window like shadowbox instead of targetting new windows.
View 3 Replies
Nov 16, 2010
i have a function that pulls URLs from various web resources. needless to say some are full valid URLS and some are relative as per the HTML of the page. below is my asp.net/ c# logic i derived for examining the URL and then generate a full usable URL from whats pulled from the site...
NOTE:
origianlurl is the full url of the first searched page, and relativeUrl is a url found within the searched page (it can be a full www.site.com or a /contactus.html)
private string ResolveRelativePaths(string relativeUrl, string originatingUrl)
{
if (relativeUrl.StartsWith("http") || relativeUrl.StartsWith("www"))
return relativeUrl;
if (relativeUrl.StartsWith("/"))
{
//get main url something.com
[code]...
View 1 Replies
Jan 18, 2011
There is a small advancement in my app, developing using ASP.Net and C# on fx4.0. Requirement is that my client needs dynamic paging size. He wants to set page size of all gridviews approx 10-15 , as needed. If he wants 5 then my app will display 5 and if he sets 10 then the app will display 10.
View 1 Replies
Jan 10, 2010
I'm binding data to my dropdown as follows:
[Code]....
So my dropdown will be populated with a list of years that could be different depending on the SchoolID passed in. I want my default value to be the max returned in the SELECT query minus 5 (so in other words, the max index minus 5). For example, if my list of years was:
2004-05
2005-06
2006-07
2007-08
2008-09
2009-10
2010-11
2011-12
2012-13
2013-14
2014-15
Dim conn As String = ConfigurationManager.ConnectionStrings("Elevation-TestConnectionString").ConnectionString
View 5 Replies
Feb 23, 2010
i have a page where i have a search area for users and a blank table. When a user performs a searcg,im creating in the cs the rows for the table and adding in the cells textboxes with values from DB. The textboxes ID´s are also being retrieved from the DB. Then, the user can change values from the textboxes. I also have an asp button that´s supposed to save the changes BUT i cant manage to persist the ids and last values between postback. Ive tried something ClientScript.RegisterArrayDeclaration but the array comes up empty. Then i used a hiddenfield but does the same trick.
what am i doing wrong?I add the hiddenfield,i try to add all the controls ids to an array but seems impossible,and there is no way i am getting the last values in another array. Im loosing everything between postbacks, but if i manage to save these ids and values, ill re-make the table in a sec.
View 5 Replies
May 7, 2010
I have a page that is currently generating dynamically created textboxes in a table format. The users are requesting that the tab order be changed from horizontal-vertical to vertical-horizontal. I know that you can use the tabindex attribute to control the tab ordering, but I can't for the life of me figure out the right way to get the sequential number properly for the textboxes. I guess this is more of a math question than anything else!
FYI, the textboxes are made while looping two different collections. First collection looped to make the rows, for each row, second collection (which is a property of the first collection objects) is looped to create the columns.
View 1 Replies
Oct 11, 2010
I'm wanting to adjust this code to pull the theme name from a database table, instead of just manually assigning a theme in the file. This way a site administrator can set the theme dynamically. If never done this with a global.asax file, so I'm not sure what the best way is to accomplish it?
Here's the code that needs tweaked:
[Code]....
The database table could be "ThemeName" with rows ID & Theme. If performing this in the global.asax file will cause any big performance issues.
View 3 Replies
Jan 25, 2011
I have a user control (i.e. ascx) that comprises of two related list boxes (i.e. once you change the selected item in one list the contents of the other list update). I'm adding this user control dynamically to a page on the click event of a button (i.e. using LoadControl).I wish to set the list box datasource properties, as well as the default selected item of the parent list from my parent page so I created public properties in my user control to accomodate this. I also created an event in my user control that notifes the parent page when the selected item changes in one of the list boxes so I can update the contents of the other list box.
I understand that I have to recreate the user control on every postback in order for it to function correctly but I'm not sure exactly how I should be doing it. I've shown below what I have currently - whilst it works the problem is that on postback I'm always creating the user control with all its default properties and then updating the properties that need to change(?). For example, when the choice in theparent list box changes the datasource of the list box is set twice (once in AddControl and then again in OnParentChanged)? As the contents of the list boxes originate in a database it means I'm making unnecessary calls to the database (unless I do some something like store each unique set of data in the ViewState).
I'd be very grateful if someone could review how I've done things and illustrate how perhaps I should be doing things. I'm not sure if the way I've done this is considered the 'correct' way. For example there may be a better way of doing things would avoid setting the properties twice? I'm a bit unsure of the way I've set the datasource properties of the list boxes and bound them. I wished to set the datasource from the parent page because I might have a second user control on my page that may also use the same datasource and I could reuse it (as opposed to each control making its own call to the database) so I'd like to keep this feature if possible.It would be great if posting code in reply that you use my example as a guide so I know what you're referring to.Here's the code for my user control:
[Code]....
[Code]....
Here's the code for my containing page:
[Code]....
View 1 Replies
Oct 20, 2010
I am dynamically creating columns for my GridView and the DataFormatString is not doing anything.
Code snippet
[Code]....
View 3 Replies
Jan 7, 2010
I am in need of some assistance in regards to how to best set the values of properties for a Web User Control which is being included into a cell of a GridView with dynamically created columns. I have tried a few different approaches, but can't seem to get a satisfactory result. Also, to be completely honest, I am not really sure if I am using best practices for what I am trying to accomplish.
First off a little background:I have a GridView for which we will never know the exact number of columns at run time. The columns are predicated by user selection. I am creating the command text for the DataSet on the fly and then looping through the columns of the resulting DataTable in order to use custom TemplateFields. This works ok for just printing out the row values but not so much for when I need to insert the Web User Control into a cell.The Web User Control is in essence a collection of image links which are used as a "Quick Nav" tool. I need to pass the values of 2 fields from each DataRow to the control via properties (for example, CustID and ProductID). I am using custom TemplateField classes inheriting from ITemplate for displaying my fields and extending the DataBinding event like so: [Code]....
This won't work for my User Control as DataBinding is called after the control is loaded into the page and I need the properties to be set before the Page_Load event of the control is fired.Is there a GridView event I should be looking into instead such as RowCreated or RowDataBound? Or should I modify how I loop through the DataTable by doing rows first, then the resulting columns as I've seen done elsewhere?
View 5 Replies
Aug 12, 2010
Issue when setting Display ="Dynamic" for Required Field Validator.Here is my ASP.NET code. Simple. it has a A textbox associated with a required field validator and a submit button.
[Code]....
Do the following
1. Click on Button1
2. RequiredFieldValidator will be shown
3. Type some text in TextBox
4. Use your Mouse(no tab please). and click on the button , you can see that your page does not "POSTBACK" and only the validation gets cleared. you need to
click again the button for Submission of Form.This seems to be a bug by Microsoft when setting the property Display ="Dynmaic" and Is there a easy workaround without changing the intended behavior for this available?
View 3 Replies
Dec 10, 2010
Been using MvcContrib for strongly typed redirects since MVC1. Aren't we there yet with MVC3 or did I miss something (just been scratching the surface)
View 5 Replies
Feb 18, 2010
In answering another persons question here on SO, I discovered that there is a small "bug" in my global redirect code.I have wired up a Global class to an HttpModule. It's job is to detect "http:/www." in the URL and redirect the user to the NON www. version
Protected Sub OnBeginRequest(ByVal sender As Object, ByVal e As EventArgs)
'Force Removal of WWW
Dim application As HttpApplication = TryCast(sender, HttpApplication)
[code]....
when it redirect a page http://www.example.com/AboutUs, the goal is to have it go to http://example.com/AboutUs (the rewritten page) but instead it's going to http://example.com/Default.aspx?Slug=AboutUs (the original page).I tried doing a bit of a hack by changing
Dim newUrl As [String] = UrlRegex.Replace(url.ToString(), [String].Format("{0}://", url.Scheme))
application.Context.Response.Status = "301 Moved Permanently"
application.Context.Response.AddHeader("Location", newUrl.Replace("Default.aspx", ""))
to
Dim newUrl As [String] = UrlRegex.Replace(url.ToString(), [String].Format("{0}://", url.Scheme))
newUrl = newUrl.Replace("Default.aspx?Slug=", "")
newUrl = newUrl.Replace("Default.aspx", "")
application.Context.Response.Status = "301 Moved Permanently"
application.Context.Response.AddHeader("Location", newUrl)
not something I want to do anyways since it's a hack, but it didn't work anyways.
View 4 Replies
May 8, 2010
I m trying to access a data after invoking a URL which redirects the output to another page with query strings.ie:
$.ajax({
url: 'http://foo.com/results/bar.aspx?fooid = 123&more=1',
success: function(data) {
[code]...
Reponse results empty. This URL is a redirect to another page with query string, I already have a page that parses the query string and write the output to a page.But response is blank.
View 1 Replies
Jan 11, 2011
I'm working on a manager of sorts that allows certain employees to view the results of a survey customers take. I'm tracking the IP address of the customers that take the survey and displaying that ip address to the employees who can view the results. I'm using a gridview with an sqldatasource to extract the data out of the database and display it. What I would like to do is add a button or link that takes the IP address and appends it to a url of web site to track the location of the ip address on a map. I have already signed up for a serivce to do this but am unsure of how to code it.
Here is my Gridview
<asp:GridView ID="GVnewsletterManager" runat="server" AutoGenerateColumns="False"
DataSourceID="SqlDataSource1" AllowPaging="True" AllowSorting="True"
BackColor="White" BorderColor="#CCCCCC" BorderStyle="None" BorderWidth="1px" [code]...
View 1 Replies
Dec 14, 2010
I have a website that basically allows customers to build a cart with an item that can be configured. A user will pick an item, and they'll be prompted to pick the first option they want, they get sent to the second step where they pick their second option, etc. The number of steps and the number of options are variable, as they are defined by the client. Usually the item only has 2-3 steps with 5-10 options. However, in order to make it faster for the customer, if there is only one option available for the given step, it will automatically be chosen and the user will be sent to the next step.
A client decided to set up an item with 10+ steps with only one option for each step. This results in the entire process automatically choosing everything. FireFox doesn't like this, as it gives the error Firefox has detected that the server is redirecting the request for this address in a way that will never complete. I haven't checked IE or Chrome, although it probably gives similar errors).
What's the best way to fix this? Right now the process is basically User picks item user picks option if there is more than one option available. Otherwise the website does step 3 itself. POST to add the option to the cart Redirect to Page.aspx?step=# repeat step 2-4 as many times as necessary
Is there any change I can make to the code or page so that FireFox doesn't think I'm in an endless loop?
View 2 Replies
Oct 15, 2010
I've created web site in c:website folder using visual studio 2010. Then, I've created web site in IIS 7.5 that maps to that folder. However when I access Default.aspx page and request to css is issued like
http://localhost/webapp/Styles/Site.css
it's redirected to something like this:
http://localhost/website/Account/Login.aspx?ReturnUrl=%2fwebsite%2fStyles%2fSite.css
View 1 Replies
Feb 7, 2011
I have configured forms authentication for my MVC 3 RTM application. I updated the configuration to the following and set the autoFormsAuthentication per the Gu and StackOverflow to false. However, when my application is deployed to my web server (W2k3 Standard SP2, II6) the controllers marked with [Authorize] are always redirected to /Account/LogOn instead of the configured value.
[Code]....
View 5 Replies
Jun 29, 2010
I have a products page, with a treeview on left, (telerik) and on the right there is a div. The div on the right is used to load stuff in it, (using jquery, calling another aspx with a querystring parameter), called from Telerik Treeview's client-side OnNodeSelecting event ... Everything works as expected. There is also a RadioButton list (asp.net rbl) on top of this page, that is set to AutoPostBack. It switched the current language of the page. In all the other pages, it changes the Language and reloads the page. Then browsing the proıducts is pure client-side by loading into the rihgtmost div, (jquery calling another aspx page with a parameter, and loads the resulting HTML into the div).
What happens is, once I load content into this div, and then try to select another language from the RadioButtonList, whole window redirects to the aspx page that is supposed to provide the content to jQuery load. I have absolutely no clue why that happens.
Code below:
TreeView is actually inside an ascx. The client-side code is
$(document).ready(function() {
loadproduct(getDefaultUrl());
});
function getDefaultUrl() {
var hf = document.getElementById('ctl00_cphContent_hfLastSelectedProductUrl'); ///this is for preserving the state
var url = hf.value;
return url;
}
function UrunMenuNodeClicking(sender, args) {..........
note: the Class MyControl inherits from System.Web.UI.UserControl , and has a property that accesses Session and sets the current language as an integer. Actually it is an enum like Languages.English, I do (int)enum and send it to session ...
View 2 Replies
Mar 7, 2011
I have a fairly standard ASP.Net web application which is used via mobile safari on the iPhone.Some users who have a link to the web application placed on their desktop via profile are reporting that when navigating between pages (which I do on the server with Response.Redirect after specific events or via standard anchor tags in other cases (no target specified)) that Safari opens a new window instead of reusing the existing window.
Because of this, any login token/cookie etc (i'm using the built-in ASP.Net membership stuff), is now gone for that new browser window and the login prompt is shown.The problem doesn't happen every time, and I can't seem to replicate it on my device (but i'm not deploying the shortcut via profile)As you can probably imagine, it's quite frustrating for the users to have to log in every time, and you can't fix an issue you can't replicate.My question is, has anyone heard of this issue and/or know a workaround?The app is NOT iPhone specific, that is, it is used in a full desktop browser as well, and the logins stay like you'd expect there - and the same window is reused repeatedly.I've considered a few possibilities, but have been drawing a blank as far as what might be causing this or how I can resolve it.
View 1 Replies
Oct 29, 2010
I've just upgraded a site from ASP to ASP.net and I'm looking for instruction on how best to handle the redirects. The domain isn't changing but I need to handle the change in file extensions (.asp to .aspx) as well as changing the underscores in the file names to hyphens.
From what I've found so far, creating a rule in the web.config is probably going to be the most convenient approach as this site is in a shared hosting environment, but I'm just not sure of the syntax to use.
View 2 Replies
