State Management :: Cascading Dropdownlist Will Not Reload With Updated Database Data Unless End And Restart

May 19, 2010

I have a cascading dropdownlist. The first drop down is for Departments and is databound on PageLoad from the database. The user then selects a department and the second dropdown is populated with the appropriate sub departments via JQuery/JSON which calls an httphandler. The problem is as follows: I select a department and the subdepartments are filled.

I finish what I'm doing on that screen and everything is fine. But then if I go to a different screen and add an additional subdepartment then come back to original screen, the new sub department won't appear in the cascading dropdown. I have to close the browser and restart the session in order for any new sub departments to appear even though they are in the database. I put a breakpoint in the httphandler and noticed that it is only called once per session per each department in the first dropdown. I don't know why this is happening. I want it to call the httphander EVERY time the index of the department dropdown is changed.

[Code]...

View 3 Replies


Similar Messages:

State Management :: Application State Is Not Cleared When Restart The Browser?

Feb 23, 2011

I am very new to asp.net. I developed one application. In that I have two pages. First page contains Application.Get() in page load event, here I read this Application variable, initially it returns NULL. If it is NULL, I make some buttons invisible. Then I jump to second page, in that page contains Application.Set(). Again I jump from second page to first page, this time Application.Get() is not NULL, I make some buttons visible.This is ok, if I execute the program in .net software.

But, when I publish this same program to web server like IIS, it is not working properly. After publishing very first time the first page returns NULL after that it doesnt return NULL even I closed the browser. I dont know why. In program, I used 2.0 framework. IIS also has 2.0 framework. Please clear this issue.

View 6 Replies

Data Controls :: Populate Country State City Cascading DropDownList

Nov 21, 2012

is there any easy way to add city names,state names,and country names in dropdownlist..

View 1 Replies

Data Controls :: Populate Country State City Pincode Cascading DropDownList

Sep 20, 2012

Using four dropdown lists (country, state, city, pincode) in one table. i want to select one after other like based upon the country, states has to be displayed and based upon the states, cities has to be displayed and based upon the cities , pincode has to display. 

View 1 Replies

State Management :: Reload Page Only Once After Being Loaded From IE Favorites Tab?

Nov 3, 2010

I have a page with several panels which are enabled or disabled depending from which page user were redirected to this particular page (based on UrlReferrer). Everything works perfectly until a user adds this page to favorites in IE8 (not sure about other browsers at this point), and then returns to that favorite in the future. It contains the previous data and not the data from the current page . When I click F5 it works again becase page is reloaded from the server and not from IE cache. How can I avoid this issue? Is there any way to force page reload only once! I tried also to put some code into "If Not IsPostBack", but it still does not work.

View 3 Replies

Data Controls :: Bind Cascading Dropdownlist To Show State And City Which Is Stored In Table

Apr 27, 2016

Into my application there is EditAds.aspx page where the user get a link on his email after he add an Ad into my application. My inquiry is can i bind the cascading ddl to show the value of State column into Ad/product row as well if the user want to update the rest of state will be also reachable. It maybe hard to get what i am looking for exactly so i make a short screen record ...

Rebinding values of Ad/product depending on AdsID which is  a query string in the page called: QADNUM

[URL] ....

if (!IsPostBack)
{
if (cookie["Location"] == null)
{
DataTable rEfilterstathpBizDT = new DataTable();
using (SqlConnection REGGfilterstathpBizCon = new SqlConnection(sc))

[Code] ......

View 1 Replies

State Management :: Save Session Variables Through Browser Refresh / Reload?

Mar 30, 2010

Is there a good way to keep the session after a user clicked reload/refresh? My boss wants this functionality, and I don't really/really don't want to use a query string...

View 2 Replies

State Management :: Keep Data In Static Datatable And Bind Dropdownlist

Mar 25, 2011

Which one is faster? For a dropdownlist binding it the first time and using ViewSate or Turning of viewstate, keeping the data in a static datatable and binding the dropdownlist each time on a postback

View 7 Replies

State Management :: DropDownList.SelectedValue And Session State

Feb 9, 2011

I have a DropDownList on a main form that has a few values, one of which I want to store in the Session. I added the following code to the DropDownList_SelectedIndexChanged method:

Session.Add("CEEnvironment", EnvironmentDropDownList.SelectedValue);

View 4 Replies

State Management :: How To Store Data From DataBase Like XmlNode

Sep 21, 2010

i am building an N-tier application now i want to store Data(like XmlNode) that is common to all users ..

now i thought using Application to hold the data but my data lays in the BLL tier which is an Class Library project and i can't store any datain there for example :

HttpApplication MyApp=new HttpApplication();
MyApp.Application["Data"]=XmlNode;

My question is what is the best way to store Data (not small data like user name etc..) is it Application? orCache?

i would like a small example within a ClassLibrary project

View 2 Replies

State Management :: Recreate State Session Database In SQL Server 2008?

Apr 5, 2010

Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?

View 2 Replies

State Management :: Cache Data To Decrease Database Activity?

Apr 1, 2010

Im working on my first ASPX webpage now, and Im wondering if there is some way to make a cache?

With a cache, I mean a list of variables that gets transferred from a db to for insance a hashtable the first time a user loads the page. When the next user loads the page, the db doesent get touched, but the variable is collected from the hashtable.

I tried to make a static class, but it re-loaded for each time I refreshed the page.

View 8 Replies

State Management :: SQL Database - Cache Expires The New Data Is Picked Up?

Dec 17, 2010

I'm running a website on a SQL 2008 database. At the moment most of my data is in cache but what I want to do is be able to update the data on a regular basis, say every 3 hours, maybe more frequently. Obviously I can set the cache to expire and pick up new data, but how can I replace part of the database (because some tables are populated by the user) in the background, so that when the cache expires the new data is picked up?

I notice when I upload data through VS, it wont let me upload if the DB is in use - so how do I get round issues like this?

View 3 Replies

State Management :: Configure Version 2.0 Session State Database In MSI?

Mar 28, 2011

I have upgraded our system from .NET 1.1 to .NET 4.0. I also had to update the ASP Session State database to version 2 by running the following command in the command window.

aspnet_regsql.exe -S localhostSQL2005 -d ASPState -ssadd -sstype c -E

Is there any way that I can configure the MSI setup project to check the ASP.NET Session State and install version 2 if needed?

View 1 Replies

AJAX :: Cascading DropDown Reload On Post Back?

Feb 21, 2011

I add cascading drop down in a place holder during page load. When i submit the entire form, i found out that my drop down list is reload and my selected value is not selected.

View 3 Replies

AJAX :: Cascading Dropdowns Reload On Event Trigger?

Oct 15, 2010

I have three cascading dropdowns and two of them need to trigger something outside of the dropdowns, so I have OnSelectedIndexChanged events on them. So as to not reload the whole page when these items are triggered, I have all of this in an Update Panel.

Everything works fine -- the only issue that the client doesn't like is that the cascading dropdowns reload on the asynchronous postback.

View 3 Replies

Data Controls :: Clear Cascading DropDownList Selection When Parent DropDownList Is Changed

Jan 8, 2013

I am having two dropdownlist in my project,one dropdownlist for empid, another dropdownlist for month, if the user select the empid, the values are retrieved in the textbox.

In the second dropdownlist, if the user select the month in the dropdownlist it will display the leave details, its all working fine, if the user again select the first dropdownlist that means empid, I want to show the second dropdownlist as select month, how can do this.....

View 1 Replies

State Management :: Taking Too Much Time To Fetch Data From .xls File And Storing It In To Database

Nov 6, 2010

I am fetching data from .xls file and storing it in to database. Then my users work on a single table where I stored all .xls data. But the problem is that it takes tooooo much time.. So, I want to use cache. But I never used this... Can any one tell me this example how can I use cache with database for increasing application speed?

View 2 Replies

MSMQ Inconsistent State After Restart?

Apr 6, 2010

I'm seeing a really strange error that I'm having a difficult timetracking down. I think its related to my configuration of Rhino ESB, though I'm not sure
if RSB is actually causing it, so I figured I'd ask and see ifanyone else has come across this in any other usages of MSMQ.I'm using RSB as a client in a web app (ASP.NET, the client runs in the background). The client talks to a windows service via the MSMQ binding for RSB. Restarting the service never appears to have an effect on MSMQ, neither does restarting IIS by hand. However, whenever I actually restart the computer itself, MSMQ always refuses to start back up, claiming that a "queue is in an inconsistent state". Attempting to start MSMQ manually results in the same error, effectively rendering the MSMQ install completely useless. The only way to solve it is to actually remove then reinstall MSMQ.

The only information I've found via the almighty Google are references to a problem in MSMQ 2.0 (this problem is occurring in MSMQ 4.0). I've verified that Dispose is being called on on the bus at shutdown, in both the service and the web site.

View 1 Replies

State Management :: Disabling ViewState For DropDownList And Using AutoPostback With SelectedIndexChanged?

Dec 3, 2010

The sites I mantain are using way too much ViewState and I'd like to reduce that so the size of the page is reduced. I've done a lot to remedy this but I have an issue relating to DropDown lists that use AutoPostbacks.I have a dropdown list with a lot of list items and a good part of the ViewState usage is to hold the list item data. If I disable ViewState and set the AutoPostBack property to true, the page will post back and in the page load I am trying to repopulate the dropdown list with cached data. However, it seems that the SelectedIndexChanged event doesn't fire when EnableViewState="false".Is it possible to make this work without enabling ViewState for the drodown list?

View 6 Replies

Forms Data Controls :: Reload Datasource And Dropdownlist?

Jun 10, 2010

i think i can't see the forrest for the trees.......there HAS to be a simple way to do this. so i created a web page and on that page i have two dropdown lists. the first is STATE and the second is COUNTY. the STATE is a static list. but the COUNTY is generated whenever the STATE changes. now....when i set up the COUNTY dropdown list, it prompted me for a datasource. i have a store procedure which takes the 2-letter STATE code and returns all the counties for that state. so i set up the datasource for the COUNTY drop down list by just following the prompts from visual studio. i gave it a default state of Alabama (AL). and all is fine. so here's my question: how can i reload the datasource and subsequently the COUNTY dropdown list? i see no way to access the datasource that the environment generated for me.

well.....i thought.......i'll just do it the old fashioned way and set up a command.......connectionstring.......and sql statement and load the results into a datareader (do i REALLY have to do all that?)

but it still doesn't work. what's the simplest way for me to just re-fire my stored procedure and pass it the STATE parameter and reload the datasource and dropdown list?

View 3 Replies

Forms Data Controls :: Reload Items In Dropdownlist?

Jun 22, 2010

i have dropdownlist. After i loaded data from javascript to dropdownlist,i used dropdownlist.item.count but counter always null. how to refresh dropdownlist?

View 5 Replies

State Management :: Strange Connection Between ViewState And DropDownList's SelectedIndexChanged Event?

Sep 20, 2010

I have this code (just for example):

[Code]....

The Code-behind file looks like that:

[Code]....

So, when i use

[Code]....

SelectedIndexChanged event doesn't fire for the first item of the DropDownList. For any other item SelectedIndexChanged fires, but not for the first one.Could someone, please, explain what kind of magic is it?(I use Visual Studio 2008)

View 2 Replies

State Management :: Viewstate And Dropdownlist / Initial Selection Is Lost Each Time The Page Refreshes

Jan 13, 2011

I have a simple search page with a drop down list that I would like the value to persist on refresh..basically the user will select their location from the dropdownlist and this will be used to populate a gridview. After this the page is set to refresh at a set interval and use the same location data initially selected by the user. However the initial selection is lost each time the page refreshes.

p.s system is to old for ajax!

<meta http-equiv="Refresh" content="300" />
<script runat="server">
Dim connectionString As String = ConfigurationManager.ConnectionStrings("****").ConnectionString
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
If Not IsPostBack Then
Dim conn As SqlConnection
conn = New SqlConnection(connectionString)
Dim Locationcommandtext As String
Locationcommandtext = "SELECT * FROM [Location] ORDER BY [Location]"
Dim loccomm As SqlCommand
loccomm = New SqlCommand(Locationcommandtext, conn)
Dim reader As SqlDataReader
Try
conn.Open()
reader = loccomm.ExecuteReader()
Locations.DataSource = reader
Locations.DataValueField = "LocationID"
Locations.DataTextField = "Location"
Locations.DataBind()
Catch ex As SqlException
Response.Write("SQL Error:
" & ex.ToString())
Finally
conn.Close()
End Try
Else
'"Viewstate should kick in here"
End If
End Sub
</script>

View 6 Replies

Data Controls :: Cascading DropDownList Using SQL DataSource

Apr 19, 2012

I have 5 dropdown list (sector-country-year-project code-project title) so what i need is when i select specific sector for example education , the rest of the label should show me the only data related to the sector education in dropdown list. the same with other if i select year 2011 should show me in other dropdown list just the data related to year 2011.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved