State Management :: When To Use SQLServer Or StateServer Session Mode
Feb 13, 2011Just wanted to know in which type of web application we can use out proc session state mode?
View 2 Replies
Similar Messages:
State Management :: Unable To Serialize The Session State In 'StateServer' And 'SQLServer' Mode
Dec 12, 2010I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
State Management :: Session Does Not Get Saved If SessionState Mode Is StateServer
Mar 16, 2011My session variables don't get saved if the SessionState mode in the web.config file is set to StateServer. But when I changed it to InProc, then everything is fine and good. I'm trying to save a custom built object (or class) into the session after the user logs in.
View 4 RepliesState Management :: Switching From InProc To StateServer Mode?
Jan 18, 2011I have an asp.net site that's basically a giant form for users to submit weekly turkey information for their starter and finisher houses. I use session variables so the information is viewable to a "Review" page. There have been 3 instances where the users would try to submit their information but kept losing their information. As far as I know, they are not letting the page sit idle for more than 20 minutes. I tested it out myself and lost session variables after less than 10 minutes. My sessionState mode is InProc. Should I look into switching to StateServer? If so, how would I do this?
[Code]....
Build A Fully Customized Session State Mode Instead Of Using Inproc Or SQLServer?
Mar 4, 2011Is it possible to build a fully customized Session State Mode instead of using Inproc or SQLServer?
View 1 RepliesState Management :: Using Global.asax To Set Session Variables Pulled From SQLServer?
Sep 3, 2010I have a custom class that pulls user information from a SQL Server table. Now that I'm expanding the site from a single page to others. I want to shift the code to the Session_Start event so that the information is always loaded when the site is accessed. How do I call my custom code from global.asax since its script and not a class.
View 5 RepliesState Management :: Session Mode State Server - Sending Asynchronous Request
Nov 5, 2010Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
State Management :: When To Choose Out Proc Session State Mode
Feb 13, 2011Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 RepliesState Management :: Deleting Folder And Session State Mode?
Mar 16, 2011I write a simple web site in asp.net. In one page i want to delete a folder of web root. When i delete it folder, the all session in project is changed to null. I write a post in this forum. Here is the adress of it post: ([URL]) Some pepole answer me to change the session state mode to StateServer. In default the session state mode is Inproc, and i changed the session state mode to stateServer.but when i changed the session to stateserver this error is appear in application eventlog after two day and my web site dont working in iis. This error is like this:
Event Type:
Warning
Event Source:
ASP.NET 2.0.50727.0
Event Category:
Web Event
Event ID:
1310
Date:
3/12/2011
Time:
1:27:55 PM
User:
N/A
Computer:
WIN2003-00A346F
Description:
Event code: 3009
Event message: Unable to make the session state request to the session state server. Details: last phase='Sending request to the state
server', error code=0x80072749, size of outgoing data=0
Event time: 3/12/2011 1:27:55 PM
Event time (UTC): 3/12/2011 8:57:55 AM
Event ID: a5c8bfd16f74429e820989e8ce8082d0
Event sequence: 10
Event occurrence: 1
Event detail code: 50016
Application information:
Application domain: /LM/W3SVC/1547208020/Root-1-129443938731955000
Trust level: Full
Application Virtual Path: /
Application Path: C:InetpubwwwrootClishareClishare
Machine name: WIN2003-00A346F
Process information:
Process ID: 1276
Process name: aspnet_wp.exe
Account name: WIN2003-00A346FASPNET
Exception information:
Exception type: HttpException
Exception message: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
Request information:
Request URL: [URL]
Request path: /main/home.aspx
User host address: 64.79.69.155
User:
Is authenticated: False
Authentication Type:
Thread account name: WIN2003-00A346FASPNET
Thread information:
Thread ID: 1
Thread account name: WIN2003-00A346FASPNET
Is impersonating: False
Stack trace: Custom event details: For more information, see Help and Support Center at [URL]. When i reset ASP.NET State service, the problem is fixed, but after one or two days, this problem apears again. What's the problem and how can i fix it? And how can i delete a folder in asp.net without the session is lost?
State Management :: Make Session Timeout In INPROC Mode?
Nov 30, 2010how to made session timeout in INPROC mode
View 5 RepliesState Management :: Sharing The Session Variables Between Two .net Applications Using SQL Server Mode?
Sep 18, 2010I have two different IIS applications within the same domain(let us say www.mydomain.com) , both of these applications use the same database instance(same connectionstring), now what I want is that both of applications can see each sessions variables , can SQL Server session state mode helps in this case? Did someone try that before? Is there any other way to share the session variables?
View 3 RepliesState Management :: Set The Mode Of Session State As State Server And Point To Another Server?
Aug 26, 2010In my web application, I set the mode of session state as State Server and point to another server. After run some days, I always meet following exception:
The state server has closed an expired TCP/IP connection. The IP address of the client is 192.168.80.157. The expired Read operation began at 08/25/2010 14:18:03.
C# - Unable To Share Session State Between 2 Web Apps With StateServer?
Jul 20, 2010I'm having trouble getting 2 identical ASP.NET MVC applications to share the same Session using a Session StateServer. The reason I'm trying to do this is we will eventually be deploying this app across 3 web servers that need to share the same state. We need to use StateServer because we are trying to minimise use of the db for non data-related storage.
The Setup: I've deployed the same code base to http://localhost/App1 and http://localhost/App2
both have identical Web.Config files with the following:
<system.web>
<sessionState mode="StateServer"
cookieless="false" [code]....
The Result:For both deployments, when the page first loads I can see that the mode is StateServer and the timestamp is getting set to the same time as the realtime value.. However, if this was working, only the first page should have the same time as the realtime value. The second page load should read from the StateServer because that timestamp value is no longer null, and display that time value. But instead, it's displaying the realtime value again.
When I refresh the page, I the timestamp stays the same and the realtime value is always updating. This indicates that the timestamp is being saved to the Session, but the time stamp value is always different for both deployments when it should be the same, so this indicates that the Session is not being shared.
Session - Difference Between "InProc" And "stateServer" Mode In SessionState?
May 25, 2010like the title shows I want to know what is the difference between "InProc" & "stateServer" mode in SessionState on ASP.NET.
View 2 RepliesState Management :: Error :Session State Has Created A Session Id, But Cannot Save It?
Nov 18, 2010I read the solutioin for this error, at the following link :http://forums.asp.net/p/1046935/1576341.aspxbut I am still not clear what exactly causes the error. I have two doubts :1. Can anyone please elaborate a bit on this issue, with any example ????2. Is there any drawback of this approach ?
View 4 RepliesSecurity :: Session State SQL Server State Mode?
May 4, 2010In my database I have already installed the aspnetdb membership tables and process (think that was running : aspnet_regsql.exe) with all my other custom build tables for my project. All works fine.I want to use SQL server session state. (Asp.net 2.0, SQL server 2005)My project will be on a SHARED HOSTING environment, and I only want ONE database that holds all I need ( membership, custom tables, session state table, etc)I see two files in : C:WINDOWSMicrosoft.NETFrameworkv2.0.50727
InstallSqlState.sql
InstallSqlStateTemplate.sql
I assume I run the "InstallSqlStateTemplate.sql" and follow instruction from this reference to SQL server session state operational in my single project database : [URL]
Losing Sessions When Running In StateServer Mode?
Apr 23, 2010I have checked the servers (Win Server 2003) application event logs for the following problem [URL] which doesn't show up. It just appears that sessions drop randomly for random users
It's a single server setup, no web farms and no load balancing
Even though the issue I point to above doesn't occur in the logs, is it worth increasing the stateNetworkTimeout attribute anyway? The configuration at the moment is simply
<sessionState mode="StateServer" cookieless="false" stateConnectionString="tcpip=localhost:42424" timeout="60"/>
UPDATES:
Using FormsAuth and the Timeout is set to 60
IIS6 Settings
Recycle worker processes (in minutes) = 120
Recycle worker processes (number of requests) = 35000
Recycle worker processes at the following times = Unchecked
Maximum virtual memory = Unchecked
Maximum used memory = Unchecked
Shutdown worker processes after being idle = 90
Limit the kernel request queue = 1500
Everthing else = Unchecked
Session State - Manage Session With Custom Mode?
Jan 3, 2010I am working on a website and this is my first web project. Scenario for Session I have created a database for my project with security level little bit high. I want to manage session for each and every user who is logging in to my website. Session state can be used using Cookie as well as URL, only one at a time. Now I went over with all four session state modes. i.e 1. InProc 2. State Server 3. Sql Server 4. Custom
Now after reviewing from all these modes I am in confusion which one should I use Sql Server or Custom. Basically i want to store session related information in my own database instead of Aspnet_db which is a default database provided by microsoft. I have created all tables related to login and registration. But I dont know how to store session into my database. What tables do I need to create so as to maintain into database. I want to create a complete log of session and login related information into my database(Persistant atleast for 1 year). I want to use machinekey as AES and SHA1.
<sessionState mode="Custom" cookieless="AutoDetect" timeout="15" regenerateExpiredSessionId="true" stateNetworkTimeout="10" >
</sessionState>
<machineKey decryption="AES"
validation="SHA1"
decryptionKey="7E047D50A7E430181CCAF7E0D1771330D15D8A58AEDB8A1158F97EEF59BEB45D"
validationKey="68B439A210151231F3DBB3F3985E220CFEFC0662196B301B84105807E3AD27B6475DFC8BB546EC69421F38C1204ACFF7914188B5003C1DCF3E903E01A03C8578"/>
<add name="conString" connectionString="Data Source=192.168.1.5; Initial Catalog=dbName; Integrated Security=True;" providerName="System.Data.SqlClient" />
What all things do i need to specify in webconfig? My Data Source= 192.168.1.5 Database name= db.mdf What I need to know about. What tables do i need to add to my database to store session related information. eg. Session id (Any other field is also stored or not), Session Time, Session Start Time, Session End Time, Session Expire Time. I dont know what all things are usually taken. Do I need to encrypt Session Id
before storing into database. If Yes Encryption will be automatic or do i need to write some code to do this other than that I wrote in web config above. How mode='custom' will be used into web config using my database. in following code
<sessionState mode="Custom" cookieless="AutoDetect" timeout="15" regenerateExpiredSessionId="true" stateNetworkTimeout="10" >
</sessionState>
State Management :: Recreate State Session Database In SQL Server 2008?
Apr 5, 2010Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 RepliesState Management :: Asp Create New Session State Cookie Each Time On Debugging?
Jan 21, 2011I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
State Management :: Losing Session State In Global.asax File?
Feb 2, 2011I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
State Management :: Session State Expiration After Application Pool Recycle?
Nov 1, 2010All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
State Management :: Session State Returning Null Values?
Apr 29, 2010I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
State Management :: Version 2.0 Session State Not Installed On SQL Server?
Oct 27, 2010The fix for this error message is to run [Code]..... I have run that uptown, downtown and in my lady's chamber and it does no good, although it never complains. Are there any other possibilities?Details:
IIS Server: v5.1 running on XP. SQLServer 2005 running on a different XP box.Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618 There is an ASPState database on the server, containing only two tables: [Code].... and [Code]..... I did not use [Code].... when I ran [Code]....
.
State Management :: Session Variable Authentication State Timeout?
Dec 3, 2010I am building a web app that is limited to one database, therefore I cannot use the ASP.NET config tool. As a quick means of getting this app online, I tried to use a simple session variable. The login page verifies the user's credentials, and if they pass, it sets the session variable to a certain value. All other pages check in the page_load event whether or not the session variable is equal to that value. The problem is that once being logged in for a short while and sending and recieving some data, the session variable resets, and I'm returned to the login page to repeat the process. Here's the basic code from my webforms:
[code]....
Is there some setting I need to change in the web.config file to adjust the cookie timeout or is that only for the config tool authentication methods?