State Management :: Switching From InProc To StateServer Mode?
Jan 18, 2011
I have an asp.net site that's basically a giant form for users to submit weekly turkey information for their starter and finisher houses. I use session variables so the information is viewable to a "Review" page. There have been 3 instances where the users would try to submit their information but kept losing their information. As far as I know, they are not letting the page sit idle for more than 20 minutes. I tested it out myself and lost session variables after less than 10 minutes. My sessionState mode is InProc. Should I look into switching to StateServer? If so, how would I do this?
[Code]....
View 14 Replies
Similar Messages:
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Feb 13, 2011
Just wanted to know in which type of web application we can use out proc session state mode?
View 2 Replies
Mar 16, 2011
My session variables don't get saved if the SessionState mode in the web.config file is set to StateServer. But when I changed it to InProc, then everything is fine and good. I'm trying to save a custom built object (or class) into the session after the user logs in.
View 4 Replies
Nov 30, 2010
how to made session timeout in INPROC mode
View 5 Replies
May 25, 2010
like the title shows I want to know what is the difference between "InProc" & "stateServer" mode in SessionState on ASP.NET.
View 2 Replies
Mar 22, 2011
Why Session_End event occurs only in "InProc" mode not in "State Server" and "Sql Server"?
View 7 Replies
Mar 4, 2011
Is it possible to build a fully customized Session State Mode instead of using Inproc or SQLServer?
View 1 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Feb 13, 2011
Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 Replies
Mar 16, 2011
I write a simple web site in asp.net. In one page i want to delete a folder of web root. When i delete it folder, the all session in project is changed to null. I write a post in this forum. Here is the adress of it post: ([URL]) Some pepole answer me to change the session state mode to StateServer. In default the session state mode is Inproc, and i changed the session state mode to stateServer.but when i changed the session to stateserver this error is appear in application eventlog after two day and my web site dont working in iis. This error is like this:
Event Type:
Warning
Event Source:
ASP.NET 2.0.50727.0
Event Category:
Web Event
Event ID:
1310
Date:
3/12/2011
Time:
1:27:55 PM
User:
N/A
Computer:
WIN2003-00A346F
Description:
Event code: 3009
Event message: Unable to make the session state request to the session state server. Details: last phase='Sending request to the state
server', error code=0x80072749, size of outgoing data=0
Event time: 3/12/2011 1:27:55 PM
Event time (UTC): 3/12/2011 8:57:55 AM
Event ID: a5c8bfd16f74429e820989e8ce8082d0
Event sequence: 10
Event occurrence: 1
Event detail code: 50016
Application information:
Application domain: /LM/W3SVC/1547208020/Root-1-129443938731955000
Trust level: Full
Application Virtual Path: /
Application Path: C:InetpubwwwrootClishareClishare
Machine name: WIN2003-00A346F
Process information:
Process ID: 1276
Process name: aspnet_wp.exe
Account name: WIN2003-00A346FASPNET
Exception information:
Exception type: HttpException
Exception message: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
Request information:
Request URL: [URL]
Request path: /main/home.aspx
User host address: 64.79.69.155
User:
Is authenticated: False
Authentication Type:
Thread account name: WIN2003-00A346FASPNET
Thread information:
Thread ID: 1
Thread account name: WIN2003-00A346FASPNET
Is impersonating: False
Stack trace: Custom event details: For more information, see Help and Support Center at [URL]. When i reset ASP.NET State service, the problem is fixed, but after one or two days, this problem apears again. What's the problem and how can i fix it? And how can i delete a folder in asp.net without the session is lost?
View 1 Replies
Apr 23, 2010
I have checked the servers (Win Server 2003) application event logs for the following problem [URL] which doesn't show up. It just appears that sessions drop randomly for random users
It's a single server setup, no web farms and no load balancing
Even though the issue I point to above doesn't occur in the logs, is it worth increasing the stateNetworkTimeout attribute anyway? The configuration at the moment is simply
<sessionState mode="StateServer" cookieless="false" stateConnectionString="tcpip=localhost:42424" timeout="60"/>
UPDATES:
Using FormsAuth and the Timeout is set to 60
IIS6 Settings
Recycle worker processes (in minutes) = 120
Recycle worker processes (number of requests) = 35000
Recycle worker processes at the following times = Unchecked
Maximum virtual memory = Unchecked
Maximum used memory = Unchecked
Shutdown worker processes after being idle = 90
Limit the kernel request queue = 1500
Everthing else = Unchecked
View 2 Replies
Aug 26, 2010
In my web application, I set the mode of session state as State Server and point to another server. After run some days, I always meet following exception:
The state server has closed an expired TCP/IP connection. The IP address of the client is 192.168.80.157. The expired Read operation began at 08/25/2010 14:18:03.
View 2 Replies
Sep 18, 2010
I have two different IIS applications within the same domain(let us say www.mydomain.com) , both of these applications use the same database instance(same connectionstring), now what I want is that both of applications can see each sessions variables , can SQL Server session state mode helps in this case? Did someone try that before? Is there any other way to share the session variables?
View 3 Replies
Oct 7, 2010
I'm considering moving our web app session storage from In Proc to State Server. Can anybody give any figures as to the performance difference?
View 1 Replies
Jul 20, 2010
I'm having trouble getting 2 identical ASP.NET MVC applications to share the same Session using a Session StateServer. The reason I'm trying to do this is we will eventually be deploying this app across 3 web servers that need to share the same state. We need to use StateServer because we are trying to minimise use of the db for non data-related storage.
The Setup: I've deployed the same code base to http://localhost/App1 and http://localhost/App2
both have identical Web.Config files with the following:
<system.web>
<sessionState mode="StateServer"
cookieless="false" [code]....
The Result:For both deployments, when the page first loads I can see that the mode is StateServer and the timestamp is getting set to the same time as the realtime value.. However, if this was working, only the first page should have the same time as the realtime value. The second page load should read from the StateServer because that timestamp value is no longer null, and display that time value. But instead, it's displaying the realtime value again.
When I refresh the page, I the timestamp stays the same and the realtime value is always updating. This indicates that the timestamp is being saved to the Session, but the time stamp value is always different for both deployments when it should be the same, so this indicates that the Session is not being shared.
View 4 Replies
Oct 21, 2010
I've recently been tasked with fixing a rather nasty bug resulting from the misuse of session state. We have an asp.net web application that runs on a single sever using inproc session state. The basic design is that a typed dataset is loaded from the database and stored in session state using a common session variable name like Session["dataset"] = dataset. After the data is stored in the session the user edits the data, dataset is retrieved from the session updated and sent to the database for updating. This type of data editingstoring is used across multiple webforms that basically do the same thing. All is good until a user tries to launch a second instance of the application and data stored within the session variable can get mixed up. Here are the possible fixes that I've been able to find
Set sessionState cookieless="false" (every new instance gets a unique session id) PROS - easiest solution, almost no code changes needed CONS - guid in url, user can edit guid, guid can be copied Use a custom session key for every instance (pass a session key around and combine it the "dataset" + session key name so that each instance has a unique session variable) PROS - no guid in url CONS - most amount of code changes, possibly fragile Remove the session variable (Load the dataset from the database a second time for editing) PROS- frees up server resources, no longer dependent upon session state CONS - performance hit, high amount of code changes
View 2 Replies
May 4, 2010
I need to display data somewhat like this:
Student Name: John
Exam Grade
MidTerm1 A
MidTerm2 B
For this, I defined a class 'Student' that has the properties StudentName[String] and Exams [a list of ExamGrade objects which has the Exam and Grade properties]. And I am using nested listviews to display the data. Here is the markup for the ListViews:
[Code]....
And the StudentInfo class looks like this:
[Code]....
And Exam class has just two properties.
Now the issue is that I have to press the Edit button [link button] twicw to get the EditItemTemplate. Even then I would get the blank textboxes. So what should I do to make the EditItemTemplate appear on the first click and the TextBoxes to appear with the existing data?
View 3 Replies
Feb 25, 2011
when we go for client and server side state management in asp.net
View 2 Replies
May 4, 2010
In my database I have already installed the aspnetdb membership tables and process (think that was running : aspnet_regsql.exe) with all my other custom build tables for my project. All works fine.I want to use SQL server session state. (Asp.net 2.0, SQL server 2005)My project will be on a SHARED HOSTING environment, and I only want ONE database that holds all I need ( membership, custom tables, session state table, etc)I see two files in : C:WINDOWSMicrosoft.NETFrameworkv2.0.50727
InstallSqlState.sql
InstallSqlStateTemplate.sql
I assume I run the "InstallSqlStateTemplate.sql" and follow instruction from this reference to SQL server session state operational in my single project database : [URL]
View 2 Replies
May 29, 2010
I am doing a POC of making my website run faster. Currently it stores huge object data in Session while passing information from one page to another. What I was thinking is to use shared methods and properties instead of session. It works, but wanted tocheck if this is an optimum way to do it. Below is the code that does not use session but still pass object data from one page to another:
[code]...
View 1 Replies
Nov 18, 2010
i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.
if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?
View 3 Replies
Aug 16, 2010
i need to know the full concepts state manegemnt in asp.net,..in which site i will get the correct concept for state management....
View 4 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Dec 22, 2010
Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).
My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.
Here is the first doubt:
1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?
A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?
View 1 Replies
