My session variables don't get saved if the SessionState mode in the web.config file is set to StateServer. But when I changed it to InProc, then everything is fine and good. I'm trying to save a custom built object (or class) into the session after the user logs in.
View 4 RepliesJust wanted to know in which type of web application we can use out proc session state mode?
View 2 RepliesI am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
I have an asp.net site that's basically a giant form for users to submit weekly turkey information for their starter and finisher houses. I use session variables so the information is viewable to a "Review" page. There have been 3 instances where the users would try to submit their information but kept losing their information. As far as I know, they are not letting the page sit idle for more than 20 minutes. I tested it out myself and lost session variables after less than 10 minutes. My sessionState mode is InProc. Should I look into switching to StateServer? If so, how would I do this?
[Code]....
like the title shows I want to know what is the difference between "InProc" & "stateServer" mode in SessionState on ASP.NET.
View 2 RepliesCustomer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 RepliesI write a simple web site in asp.net. In one page i want to delete a folder of web root. When i delete it folder, the all session in project is changed to null. I write a post in this forum. Here is the adress of it post: ([URL]) Some pepole answer me to change the session state mode to StateServer. In default the session state mode is Inproc, and i changed the session state mode to stateServer.but when i changed the session to stateserver this error is appear in application eventlog after two day and my web site dont working in iis. This error is like this:
Event Type:
Warning
Event Source:
ASP.NET 2.0.50727.0
Event Category:
Web Event
Event ID:
1310
Date:
3/12/2011
Time:
1:27:55 PM
User:
N/A
Computer:
WIN2003-00A346F
Description:
Event code: 3009
Event message: Unable to make the session state request to the session state server. Details: last phase='Sending request to the state
server', error code=0x80072749, size of outgoing data=0
Event time: 3/12/2011 1:27:55 PM
Event time (UTC): 3/12/2011 8:57:55 AM
Event ID: a5c8bfd16f74429e820989e8ce8082d0
Event sequence: 10
Event occurrence: 1
Event detail code: 50016
Application information:
Application domain: /LM/W3SVC/1547208020/Root-1-129443938731955000
Trust level: Full
Application Virtual Path: /
Application Path: C:InetpubwwwrootClishareClishare
Machine name: WIN2003-00A346F
Process information:
Process ID: 1276
Process name: aspnet_wp.exe
Account name: WIN2003-00A346FASPNET
Exception information:
Exception type: HttpException
Exception message: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
Request information:
Request URL: [URL]
Request path: /main/home.aspx
User host address: 64.79.69.155
User:
Is authenticated: False
Authentication Type:
Thread account name: WIN2003-00A346FASPNET
Thread information:
Thread ID: 1
Thread account name: WIN2003-00A346FASPNET
Is impersonating: False
Stack trace: Custom event details: For more information, see Help and Support Center at [URL]. When i reset ASP.NET State service, the problem is fixed, but after one or two days, this problem apears again. What's the problem and how can i fix it? And how can i delete a folder in asp.net without the session is lost?
how to made session timeout in INPROC mode
View 5 RepliesI have two different IIS applications within the same domain(let us say www.mydomain.com) , both of these applications use the same database instance(same connectionstring), now what I want is that both of applications can see each sessions variables , can SQL Server session state mode helps in this case? Did someone try that before? Is there any other way to share the session variables?
View 3 RepliesI have a problem regarding the SessionState Collection.I retrieve an object
[Code]....
I thought that i access a reference type. But calling the default constructor to build a new object seems not to work.The next time I access the object I still get the old one.
In my web application, I set the mode of session state as State Server and point to another server. After run some days, I always meet following exception:
The state server has closed an expired TCP/IP connection. The IP address of the client is 192.168.80.157. The expired Read operation began at 08/25/2010 14:18:03.
I'm having trouble getting 2 identical ASP.NET MVC applications to share the same Session using a Session StateServer. The reason I'm trying to do this is we will eventually be deploying this app across 3 web servers that need to share the same state. We need to use StateServer because we are trying to minimise use of the db for non data-related storage.
The Setup: I've deployed the same code base to http://localhost/App1 and http://localhost/App2
both have identical Web.Config files with the following:
<system.web>
<sessionState mode="StateServer"
cookieless="false" [code]....
The Result:For both deployments, when the page first loads I can see that the mode is StateServer and the timestamp is getting set to the same time as the realtime value.. However, if this was working, only the first page should have the same time as the realtime value. The second page load should read from the StateServer because that timestamp value is no longer null, and display that time value. But instead, it's displaying the realtime value again.
When I refresh the page, I the timestamp stays the same and the realtime value is always updating. This indicates that the timestamp is being saved to the Session, but the time stamp value is always different for both deployments when it should be the same, so this indicates that the Session is not being shared.
[Code]....
From my understanding, the asp.net 1.1 application will login the user then store the information to a session and a cookie? I'm trying to access that cookie with a asp.net 2.0 application. Is this possible?
I'm thinking the mode would need to change to maybe StateServer or Sql.
what the difference between
SessionState Timeout
and
HttpRuntime ExecutionTimeout
is? Both in web.config. I want to increase or reduce the timeout in my webapplication. Means: If a users idles more than 10 min. the should get timed out.
I am performing my first steps with ASP.NET for my employment.Yesterday I tried to perform saving a value to a sessionstate variable, but it does not work.I am using C# and want to code in .NET 3.5. [Code]....
The click performs a postback to a second website where the value is to be displayed on a simple label.The value I initialized in the Global.asax is saved to the variable and then read on the second page, but I cannot manipulate it using the textbox and the button on the first page. I just don't get it...I even tried on different machines and different VS editions.
I'm building a site using the .NET 4 framework using routing and MasterPages.
Because I'm using both routing and MasterPages, I can't see any way how to get value from control on the previous page. To solve this I've used the code behind to store the control's value in a session variable. Is there a way to retrieve a value from a control using PreviousPage or something when using Routing and MasterPages?
This works fine in VWD debug mode and in IIS 5.1, but when I try to deploy it on my Windows Server 2008 (IIS7.5) machine, it get this error:
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
Here is a copy of my web.config file:
[Code]....
i am having problems with an asp.net c# site whereby i am setting a session state object to true and then redirecting to another page that needs to check the value of the session state object and it is null.
Sometimes it is set correctly and other times is is simply null.
When i debug on my local machine it works perfectly every time. Only when i upload to my web server does this temperamental behaviour happen.
As it is based around the security of the site it is obviously important that the session data be valid and accurate every time.
Is session state data unreliable?
AFAIK its set to inproc, cookieless, 30 min timeout, vanilla installation of IIS.
Does anyone have any suggestions? Perhaps i need to thread.sleep inbetween the storing of the session data and the reading?
NB: the time between the write and the read is about 70ms.. ample time for the data to be written to RAM.....
I read the solutioin for this error, at the following link :http://forums.asp.net/p/1046935/1576341.aspxbut I am still not clear what exactly causes the error. I have two doubts :1. Can anyone please elaborate a bit on this issue, with any example ????2. Is there any drawback of this approach ?
View 4 RepliesIn my database I have already installed the aspnetdb membership tables and process (think that was running : aspnet_regsql.exe) with all my other custom build tables for my project. All works fine.I want to use SQL server session state. (Asp.net 2.0, SQL server 2005)My project will be on a SHARED HOSTING environment, and I only want ONE database that holds all I need ( membership, custom tables, session state table, etc)I see two files in : C:WINDOWSMicrosoft.NETFrameworkv2.0.50727
InstallSqlState.sql
InstallSqlStateTemplate.sql
I assume I run the "InstallSqlStateTemplate.sql" and follow instruction from this reference to SQL server session state operational in my single project database : [URL]
I have checked the servers (Win Server 2003) application event logs for the following problem [URL] which doesn't show up. It just appears that sessions drop randomly for random users
It's a single server setup, no web farms and no load balancing
Even though the issue I point to above doesn't occur in the logs, is it worth increasing the stateNetworkTimeout attribute anyway? The configuration at the moment is simply
<sessionState mode="StateServer" cookieless="false" stateConnectionString="tcpip=localhost:42424" timeout="60"/>
UPDATES:
Using FormsAuth and the Timeout is set to 60
IIS6 Settings
Recycle worker processes (in minutes) = 120
Recycle worker processes (number of requests) = 35000
Recycle worker processes at the following times = Unchecked
Maximum virtual memory = Unchecked
Maximum used memory = Unchecked
Shutdown worker processes after being idle = 90
Limit the kernel request queue = 1500
Everthing else = Unchecked
I am working on a website and this is my first web project. Scenario for Session I have created a database for my project with security level little bit high. I want to manage session for each and every user who is logging in to my website. Session state can be used using Cookie as well as URL, only one at a time. Now I went over with all four session state modes. i.e 1. InProc 2. State Server 3. Sql Server 4. Custom
Now after reviewing from all these modes I am in confusion which one should I use Sql Server or Custom. Basically i want to store session related information in my own database instead of Aspnet_db which is a default database provided by microsoft. I have created all tables related to login and registration. But I dont know how to store session into my database. What tables do I need to create so as to maintain into database. I want to create a complete log of session and login related information into my database(Persistant atleast for 1 year). I want to use machinekey as AES and SHA1.
<sessionState mode="Custom" cookieless="AutoDetect" timeout="15" regenerateExpiredSessionId="true" stateNetworkTimeout="10" >
</sessionState>
<machineKey decryption="AES"
validation="SHA1"
decryptionKey="7E047D50A7E430181CCAF7E0D1771330D15D8A58AEDB8A1158F97EEF59BEB45D"
validationKey="68B439A210151231F3DBB3F3985E220CFEFC0662196B301B84105807E3AD27B6475DFC8BB546EC69421F38C1204ACFF7914188B5003C1DCF3E903E01A03C8578"/>
<add name="conString" connectionString="Data Source=192.168.1.5; Initial Catalog=dbName; Integrated Security=True;" providerName="System.Data.SqlClient" />
What all things do i need to specify in webconfig? My Data Source= 192.168.1.5 Database name= db.mdf What I need to know about. What tables do i need to add to my database to store session related information. eg. Session id (Any other field is also stored or not), Session Time, Session Start Time, Session End Time, Session Expire Time. I dont know what all things are usually taken. Do I need to encrypt Session Id
before storing into database. If Yes Encryption will be automatic or do i need to write some code to do this other than that I wrote in web config above. How mode='custom' will be used into web config using my database. in following code
<sessionState mode="Custom" cookieless="AutoDetect" timeout="15" regenerateExpiredSessionId="true" stateNetworkTimeout="10" >
</sessionState>
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 RepliesI'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.