To WCF - Passthrough Security?
Aug 11, 2010
I have a MVC website that sits on top of a WCF service. The WCF service is also accessible to the internet with username/password authentication using message security and certificates. This is setup and working.
Both the website and the service use the same membership store, using the membership API.
A user can log onto either the website or the service using the same credentials. However, when the website calls the service, it needs to pass the credentials of the currently logged on user. I can get the username from
Membership.GetUser().UserName
but I can't get the password!
Is there another way to essentially pass the website user credentials to the service?
View 1 Replies
Similar Messages:
Oct 25, 2010
I'm trying to enable passthrough or impersonation authentication inside an ASP.NET website that uses the TFS2010 API.I've got this working correctly with Cassini, however with IIS 7.5 (Windows 7) something is going wrong.I found this blog post on the subject, and tried the following:
private static void Test()
{
TfsTeamProjectCollection baseUserTpcConnection =
[code]...
View 2 Replies
Mar 10, 2010
Basically I have a master page named Flr.Master that has in it a reference to a web server control which appears to serve as a footer. Here is the referenceto the server control in the master page:
<Cloister:Footer id="footerPage" runat="server" />
I also have an asp.net web form named default.aspx, with a code behind file named default.aspx.cs.
Now I am given these instructions which I don't understand:
1.) In the master page Flr.Master add a pass through property to the footer controls AddStatistics propertry.
2.) In the LoadPage method for default.aspx.cs set the AddStatistics property to to "true".
I don't have access to the sourcecode for the server control, but I don't think I need it. I only need to figure out steps 1 and 2.
View 2 Replies
Dec 15, 2010
I have to invoke SSIS packages from web service in the most secure way. I think that windows authentication will be secure but i am not sure. I do not have much knowledge about how to achieve this and the information on the internet is very distributed.
View 1 Replies
Apr 6, 2010
We use Sharepoint to control our websites. We build the sites, then load them into the sharepoint server. My question is if I use windows authentication, how can I get my role security in my web config file to coencide with the asp.net controls that use the Forms authentication. Is there a differenence? Our security uses a session variable for security but there is no where to set up their permissions except in active directory. I hope this makes sense because I would like to implement the LoginView with Role groups but how can I give them the role="administrator"? Do I have to go into active directory and give them these permissions(would take awhile due to the size of the company)? Or do I have to set up priveladges in the web.config file for each user(difficult I think)?
View 5 Replies
Aug 18, 2010
I'm writing a simple Intranet application using windows authentication. I want to restrict access to Safe/UCantSeeMe.aspx. I am aware of the AuthorizeAttribute, but this only works on methods. I also found a good post on doing this with the MVC pattern, but I'm not using MVC. This can be done with roles in forms based security. I read on MSDN that using windows based security means roles are based on groups, but it doesn't go into any detail. how can I restrict access to Safe/UCantSeeMe.aspx?
View 1 Replies
Jul 12, 2010
I am getting an error incase user submits incorect security question's answer. I gave text in 'QuestionFailureText'. But its not working.
Below is the error getting.
'
Security Exception Description:The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security.
Source Error:
[Code]....
Source File: c:WindowsMicrosoft.NETFramework64v2.0.50727Temporary ASP.NET Filespng.webe16ed3ec284df543App_Web_rvfjstqa.5.cs Line: 0 Stack Trace:
[Code]....
View 3 Replies
Mar 17, 2011
We are using membership provider for LDAP authentication. It is working as it should.
But what all configuration settings I have to do so that
all the future requests to this application run under the security context of the Logged in user account not through the some default user set in IIS.
We need to have this working because all the permissions on the database are based on the logged in user.
We are using form authentication for LDAP authentication. And having impersonation = true in web.config.
View 1 Replies
Oct 27, 2010
I have implemented role based security in my asp.net 2.0 vb.net application using windows authentication and the windowstokenroleprovider and limiting access to certain pages using the location tag to specific active directory groups.
The issue is that when a user tries to access a page they are not authorized to view it brings up a login prompt and when it does not pass it takes them to the default page that tells them they are not authorized to view the page. I am wondering if there is a way to throw up a custom page that tells them they are not athorized to view the page that I can incorporate into the site itself with the header and so forth? if this page could come up in lieu of the sign in box popping up as well.
View 2 Replies
Apr 24, 2010
[ASP.NET 3.5, FormsAuthentication, SQL Server]
In the Roles table there is Role, and RoleType.
I have 3different roles, 2 of which have sub-roles.
Example
Role----------------------Type
Adminstrator
Subscriber---Basic
Subscriber---Business
I need to implement Code Access Security, and URL based security using the roles & types...
For instance, the (Subscriber/Basic) would need to view a different set of pages, and have different access to things then a (Subscriber/Business).
I think I can handle the Code Access security with a custom attribute, but I am unsure to how enforce a User be apart of 2 roles in the URL Authorization.
I am currently using the web.config to deny/allow access to the directories/pages.
e.g.
/Areas/Admin/web.config
[Code]....
Is it possible to force the user to be apart of 2 roles with this technique?
View 1 Replies
Jun 23, 2010
i used security in login page which restricts all users who have not logged in to all pages. I need to restrict specific users to specific pages. I'm not using AspSqlService provider. So i cannot create roles and restrict automatically. And the pictures i use in login page are not visible @ runtime.
View 1 Replies
Sep 9, 2010
I'm working on a website where it should be possible for registered users to upload word documents. The administration of users is done through Membership and Profiles. When the documents have been uploaded, the following needs to be achieved:Non-registered users should not be allowed to download documents I should be able to control which users that has access to which documents I should be able to register which user downloads which documents I should be able to track how many times a document has been downloaded
Can this be achieved be using Membership and Profiles?
View 1 Replies
Nov 19, 2010
I have identity impersonate = true in the Web.config file. I have integrated security = true in the DB connection string in the Web.config file.Before identity impersonate was true,users were able to access the DB through the web service account (seemingly).Now I get an error which says " Login failed for ... " because I am aware there is no specific account for that user in the permissions for that DB instance.I needed to set identity impersonate = true because the web service does not have access to the Active Directory,which I need to retrieve certain user information.
My question is,does identity impersonate = true override the integrated security and attempt to user the authenticated user's account to connect to the DB? Is there a simple way to prevent this in the Web.config itself?If not,would programatically impersonating the user within the Active Directory query functions and setting identity impersonate = false do the trick here?
View 2 Replies
Jun 3, 2010
I am using Itext sharp to create a pdf. I am adding an image and I keep getting this error
Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, ersion=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
it is this bit of code that is causing this
[Code]....
If i comment this out, the PDF builds and no errors are thrown (there is just no image)
I don't understand cause I am am trying to do is read a file.
View 2 Replies
Apr 2, 2013
Error:Â
Security Exception
Description: The application attempted to perform an operation not allowed by the security policy.  To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.Local its run fine. when i place in iis. it throw this exception.
View 1 Replies
Jul 22, 2010
I have created user web control library project and these controls i'm using in my web application. These User controls just works fine in my local machine but when i moved this project(including Library) to our Local server , it is throwing security exception
Error 1 Cannot register assembly "LocalServerLibraryDemoLibraryDemoLibraryinDebugLibrary.dll". Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. Library
Anybody knows why this error occuring...?
View 2 Replies
Aug 9, 2010
My website security is configured with "Windows Integrated Security" only (anonymous is disabled).
I also want to set a specific account to run the w3wp.exe process using the
Application Pool Identity to a domain account.
Running directly from the server works without any problem but from remote computers I always get the authenticaion window then the 401.1 error (after 3 attempts).
It seems that its the combination of "Windows Integrated Security" along with the "Application Pool Identity" that causes the problem. When I disable one of the two it works properly.
My server is Windows Server 2003 R2, running IIS 6.0.
View 1 Replies
Sep 21, 2010
I have an application that has a user Login Control (provided by ASP). I am just now working with the integration of a dataBase created in MS visual studio 2010, to a developed website created in MS visual web developer 2010. My main goal is to create an authentication ticket that enables a user to be able to see a dataBase information only after that user has been successfully authenticated.
Up to now I'm able to see the dataBase when i run the website even if I'm not log-in, how i can create a home page that tells the user to log-in and once that user has successfully log-in it redirects the user to another page where the user can see the database and how I can add information to that dataBase only to specific members
View 4 Replies
Jan 30, 2011
I simply want to know how to manually check if the value a user has provided for the answer to their security question matches their current answer on record. I want to use the build in support of the membership and membershipuser objects.
I see that via the passwordrecovery control that the actual answer can be returned. However I am currently not using this control and it would take a good bit to integrate it as it does not meet our user's requirements.
In a worst case scenario, getting the actual answer (like the passwordrecovery control does) and manually checking it in our application would be acceptable.
A best case scenario is some sort of API where I can pass in the user name and the answer to their security question that was provided and simply get an indication of whether answer was correct or not.
View 5 Replies
Mar 22, 2011
Working on my first asp.net webpage. i have followed video tutorials and implemented asp.net membership for login/security.Using Visual Studio 2010 i can open the Asp.net configuration page for management locally.But then if I want my site admin to manage users/security online, how is this done? Like manage through a web browser. I guess this asp.net configuration GUI is not available on the internet?
View 4 Replies
May 1, 2010
I'm hoping this is a simple configuration setting that I have incorrectly defined. I have an application that has a secure (members) area. If a customer tries to browse directly to the secured page (http://www.mysite/members/memberpage.aspx) asp.net loads up my login.aspx page. When the user successfully authenticates from the login.aspx page in they are taken to the secured page they originally requested (so far so good!).The problem I have is that I run some SQL using the User.Identity.Name on the secured page as a reference to who the logged in user is. This way I can show some customer specific information. When I take the login route outlined above, the SQL doesn't seem to run (or the Session Variables aren't loaded yet?)... my page loads up with no customer information in it. If I browse to another page and then back the customer information shows up and all is well.
View 1 Replies
Feb 9, 2011
We have asp.net configuration tool to manage user's permission and role for our offline website,
it is working very fine.
Now, I have uploaded my website and aspnetdb.mdf
now i want to manage users and it security and roles online.
How can i have asp.net Configuration tool
View 2 Replies
Feb 17, 2010
i developed an asp.net(2.0) applicaions which contains the attachments of the clients . these attachments are saved in the shared folder and retrive the file when the user requests.if i maintain the application and the shared folders in the same system it will work properly.if i maintain the application in one server and the file folder in the other server i face a lot of security issus like1.Access Denied2.Couldnot find the part of the path......for this i made an common account for the application server and the file server and also set impersonation to true.Even the i got the couldnot find the part of the path error.i already gave the everyone with full control to the shared folder and i added the common account and gave it to full controlIs there is any alternate for the save and retrive the files to and from the shared folder.
View 3 Replies
Aug 17, 2010
I am using microsoft visual web developer 2010 to build and publish my website, I am facing a security problem. My website has authentication service for my clients, each one he has his own user name and password. After I introduced a new member, my database collapsed, may be this last member is a hacker. Is their a way to improve security vulnerabilities to prevent future attacks. May be through web.config, could be encrypted.
View 11 Replies
Jun 15, 2010
I have searched and could not find any article related to "How to implement Certificate Security in
production environment".
I could able to Create sample certificates for client and Server on my local machine and was able to authenticate my client app with the certificates . These certificates are test certificates.
How do I do this in Production. We have a domain certificate from GoDaddy which resides on the server. How do I create a Client Certificate off of that.
View 2 Replies
