I have developed reports using crystal report which work well in Win XP(Dev & Server) but when we started to deploy it in Windows 2003 server , we are getting the Result as "Load report failed ". Have any one experienced this one?
View 19 Replies
Im implementing crystal report which is builtin in visual studio 2008. When i create my crystal report and check its preview it shows me the data but when i call it on my abc.aspx page report doesnt load and gives error 'Load report failed'.
This is my Code
[code]....
what may be im doing wrong. This report also accept 4 parameters and im not setting them anywhere. Also one thing i want to mention if i make another simple project and do the same thing it runs perfectly and give me the output.
I have an error loading a report on my website
[URL]
This code:
[code]...
It generates the error: Load report failed.
What settings should I have on the server.
Currently, I have a page contains a report. But while I need to load the report for several times , the latest one I got the err about
'crystaldecisions.crystalreports.engine.logonexception load report failed'
What's the problem?
I'm getting the "Load Report Failed" Error.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine.
This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
Our heavily-used VS2005 application uses CR (10.2) for an MSWord-formatted stream to a webservice, and for printing from a CRViewer. We continue to get "Failed to open report" or "The maximum report processing jobs limit configured by your system administrator has been reached". Once the error starts, the only remedy is recycling the application pool, disconnecting current users.
I have used the proper ReportDocument Close() and Dispose(), and even GC.Collect(), in Page_Unload. I upped the Print Job Limit from 75 to 300. After recycling I delete temp files.
1) Is there any way to monitor the use of the CR resources, to see when they increase and get close to the limit?
2) Is there any way to free them without having to disconnect users?
I suspect users are simply closing their browser after printing from an open CR Viewer. It would still go through Page_Unload, right? So maybe I would benefit from closing and disposing the CR Viewer in Page_Unload as well as the click that returns them to the application.
I had assumed that to permit users to page through the report, the CR Viewer had to have ViewState enabled, and remain open through Page_Unload.
I have a web page that shows all contacts and its running fine.
When user does not activity for some time and after that user clicks the button to download records, its shows message:
Validation of viewstate MAC failed
I am not getting where this problem arise and what to do to solve.
One imp thing, after being inactive for some time when I log out and then log in then its works fine.
I assume it can be session timeout problem, but don't know how to deal with it.
I have a web form with about 20 fields all validated, rather than use the validation summary control.
I would like a one line alert at the foot of the form that says something along the lines of "errors were found check the fields highlighted with a *" rather than an explanation for each field that has failed validation.
Seem simple enough in theory but i cant work it out.
Is there a line of VB.net code i could use to determine if validation has failed on one or more of my validators and maybe show a label with the "errors were found please check the fields highlighted with a *" message?
I have an ASP.NET MVC 2 web site that runs okay on my local machine. The first page that comes up uses data from a SQL Server 2005 database that is on a separate machine.
When I deploy the website to an IIS 6.0 web server and try to open the website in a browser on the web server desktop I get the following:
Server Error in '/AutoDoc' Application.
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Source Error:
Line 27: </div>
Line 28:
Line 29: <% Html.RenderAction("GenreMenu", "DocStore"); %>
Line 30:
Line 31: <div>
Source File: c:InetpubAutoDocAutoDocViewsSharedSite.Master Line:
29
Stack Trace: [SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
There are so many ways to approach this that IM a little lost in the forest. What is the best way to address giving the hosting web server access to the database server? Or should I say give the web site access to the specific database?
I have a managed dll compiled in vc++ 2005 with .net 2.0 works fine in visual web 2005.I upgrade my VW to 2008 and add the same dll to a project but getting a compile error.VC++ 2005
public ref class Class1 {
public: Class1(){
b1 = gcnew array<System::Int16>(50000);};
[code]...
I have an vb 2005 asp application that will show a crystal report based upon a user selection which is a job number.On my development machine all work fine and the report is being shown every time.When I publish the application the web server it works for most part. Every so often for selected job numbers the report that will not display. When this happens there is a text being displayed above the business object banner:The Report Application Server failed I have checked the event log and there is no entries. Also there is no stack trace. The application seems to complete normally. I have compared the registry entries in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions and they are the same id evelopment and production. I am referencingCrystalDecisions.CrystalReports.Engine version11.5.3700.0I am clueless and hoping that someone could suggest where to start looking
View 2 RepliesI'm having a problem in setting up my reportviewer's ReportServerUrl and ReportPath(Server Report's Properties).
View 6 Repliesi hv use a crystal report in my web application if i publish my application and run in iis on different system with diff server name the crystal report part cause problem login failed with server as name is alredy defined in crystal report at publish time.Can we define the name of server for crystal report in web.config.
View 5 RepliesYes, it's the infamous viewstate again! Now I am aware that problems can ocurr if you load controls in the wrong order or if the viewstate IDs are incorrect after postbacks etc etc. But my issue is that I am not really creating any controls dynamically - I only have one user control on the page.
More importantly, the issue seems to be occuring with just one user. What could be the problem? Corrupt browser cache?
ok - so I've narrowed it down a bit more. When I select an item from a drop down list control (which is a UserControl) - and then attempt to rebind my grid using the selected value, the error occurs.
The selectedvalue on postback seems to be zero every time (because the control is not in the viewstate somehow?!). The UserControl (containing the dropdownlist) is added at design-time.
[Code]....
I have a asp.net c# web application with contains reports in remote processing mode. I am using the report-viewer control to render the reports. When I run the application in debug mode, I'm able to view my reports however when I publish the application to a different server I get this error message:The request failed with HTTP status 401: Unauthorized.
My report server is on a different server than the location of my published web application. I have added new role assignment to my report server and also added to my web.config but the error persists. I think I am missing something in my aspx page for reportviewer.
I am having this problem in the production server regarding crystal report toolbar.
All images in production server were crossed out and its functions not also working.
I am using the gleamtech filevistacontrol for a back-end of a website. When i load the page which contains the control i get an error that a language file could not be found.
I get an 404 response when calling the webservice. The application is running on a windows server 2008. On my development machine the application is running without problems. I got the filevista control running in another application but this is running on a windows server 2003 machine.
Things i have tried:1. Verified all that all files are there and that the permissions are set correctly
I added the following line in my web.config in the system.web section.
<webServices>
<protocols>
<add name="HttpPost"/>
</protocols>
</webServices>
I started from scratch with deploying the application. I tried two different versions of the filevistacontrol
My guess is that is has something to do with the asmx that couldn't be loaded but i am out of options..
i am new at reporting service things when i try to create a report i got this error and idea how to fix it
An error occured during local report processing.
An error has occured during report processing.
Qery execution failed for dataset 'ds_testtablosu'
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MMDB"
I want to develop reporting service application in asp.net 2.0 with SQL server 2005.
I install sql server 2005 in my remote machine with BIDS. I need to develop reporting service application in my machine i have vs 2005 and sql server express edition.
How to download/install BIDS or Report Builder for vs 2005 in my machine.
I have a report running on sql report server 2005. When export the time field to xls using report server 2005 export, xls shows the time field in a huge negative number.
View 4 RepliesMy app is an ASP.NET 2.0 website. I use UpdatePanel to contain all UserControls. I also use ReportViewer control (local mode) for report function. When user click on "View Report" button, a javascript will be executed to open a new window which contains the ReportViewer control. Everything works well in my pc (Windows XP, IIS 5.1).
However, when I deploy the code to app server (Windows 2k3, IIS 6), I encounter a critical issue. After the report window is opened, whenever I click a button or change value of a DropDownList (UpdatePanel will be reloaded after these actions), an exception "Failed to load viewstate" is thrown.
I've tried to update the Report Viewer Redistributable 2005
(http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e7d661ba-dc95-4eb3-8916-3e31340ddc2c) in the server to SP1 (assembly version: 8.0.50727.817),
As the header says - ajax failed to load with pipeline set to integrated. When I turn it to classic it will work but not the routing !! I use asp.net 4.0 I register my route in global.asax
void
RegisterRoutes(System.Web.Routing.RouteCollectionroutes)
{routes.MapPageRoute("Article",
"{article}",
"~/ui/article/Show.aspx");}
i'm developing a web application in that i used a web form that contains two dropdown lists called ddlCategory and ddlProduct, depends on the first dropdownlist selected value the second dropdown list fetches datas from database using cache, in my application first ddl works perfectly but when i choose different value in ddl2 it doesn't change the code in my aspx page
[Code]....
when i try to change the ddl2 it wont trigger the functions on ddlProduct_SelectedIndexChanged
The request failed with HTTP status 401: Unauthorized.accesing the server report in ssrs2008
View 2 RepliesI am using a datasource in the report server where all the reports use that shared datasource while calling the reports from asp.net pages.
Now, as asp.net pages uses the connection string for the databases which is assigned in the web.config file, i want the reports also use the same connection string because you don't need to change on both places( web.config and report server datasource).
