I am using c# for coding!
Below is my html for checkbox and radion button
[Code]....
You can see I have two checkboxes and two radio buttons, My problem is that on my submit button click I want to check whether user have checked at-least one checkbox or radio button. It will be good if we can have .NET solution like (customvalidator).
I have 3 tabs with 3 seperate gridview and radios buttons in them. Each page has a seperate submit button, but for some reason each pages submit button is validating all the radio buttons on each tab, i picked the seperate controls to validate under but on any submit theya re all validated instead of just the ones on that tab.
[Code]....
I have a webform with 2 radio buttons and 1 checkbox. These work in IE and FireFox, but theye never get checked in Opera. Is this some problem with Opera or with my checbox/radio button?
I have the following code:
<asp:CheckBox ID="ckTermsNConditions" runat="server" Checked="false" />
<asp:RadioButtonList ID="rblRegistrationType" runat="server" CellPadding="2" CellSpacing="2" >
<asp:ListItem Value="Vendor" Selected="False">How to</asp:ListItem>
<asp:ListItem Value="Consultant" Selected="False">Feedback</asp:ListItem>
<asp:ListItem Value="User" Selected="False">Question</asp:ListItem>
</asp:RadioButtonList>
In asp.net mvc when validation fails error message is disaplayed on same view, values entered by user are lost . Also all the drop down list items needs to be passed again in the viewData. Selected values in the drop down list again reset. How to display same view again with failed validation message.
View 2 RepliesI have radiobuttons within a datalist. The page where they appear is within a master page. The method I had in mind of achieving the validation is with a custom validator and the following sub:
[Code]....
The problem with this code is form1 is not declared. As it is passed in from the master page.
I also have tried another method as follows:
[Code]....
With this sub:
[Code]....
I then get the error Microsoft JScript runtime error: Object expected
Here is the datalist. I need to make sure the user selects an answer for each question:
[Code]....
I've two radio buttons in my web site for selecting sex, one s for Male & another s for Female, Problem is during the Run time, I was able to select both the Radio Buttons, but as per my need i should select only one radio button. And i should perform validation Wn user not selected even one radio button i should show the error msg, like " select sex "
View 8 Replies i have a table which looks something like the following
<table id="Table1" border="0">
<tr>
<td><b>1.</b> Question 1</td>[code]....
how do i go about looping through each group of radio buttons and getting the text of the selected radio button ?the code displayed above is created dynamically ... in my aspx file i have the following code
<asp:Table ID="Table1" runat="server">
</asp:Table>
Using jQuery I want to be able to click an element which will also checks it's related radio button. I had this working fine until we had to add runat="server" to the radio buttons.When I apply this it prevents my jQuery function from working how to get round it, heres a simplified version of the code:HTML
<input type="radio" runat="server" id="sector1Radio" name="SectorGroup" title="Sector1" />
jQuery
$('#SomethingElse').click(function() {
$('input[title=Sector1]').attr('checked','checked');
});
I've found out that when its converted to a .net control instead of checked="checked" (as it would be usually) it is just Checked, so I changed that but on inspecting the DOM in multiple browsers, none of my radio buttons are being checked(Are there any other ways I can use jQuery to check a radio button that has runat="server"?
I have the following code<asp:RadioButton runat="server" Text="Male"></asp:RadioButton>I want a gap between the radio button and the radio button text, I made the following changes in the text field(prefixed a space) Text=" Male". However, I don't feel this is the most efficient way.
View 1 RepliesI'm using asp.net validation controls which work fine. I've since introduced an HTML checkbox which should be ticked before the form can be submitted. My function for this reads as follows:
function terms(form) {
var terms = document.getElementById("chkTerms").checked;
var errorsArray = new Array();
if (terms == false) {
//alert("Terms not checked (works)");
errorsArray.push("You must agree to the terms and conditions.");
if (errorsArray.length) {
document.getElementById("termsOutput").innerHTML = errorsArray.join("
") + "<br />";
return false;
}
}
else {
document.getElementById("termsOutput").innerHTML = "";
}}
It is called as follows:
<asp:Button ID="btnSubmit" runat="server" Text="Submit" OnClientClick="return terms(form)" />
The problem I have is seems I can either use the asp.net validation OR the custom checkbox validation I wrote. After the form posts however, the asp.net validation fires!
I have a web application that shows a page containing between 6 and 20 AJAX UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here:
[URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button
clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
Not sure if this is an AJAX issue, or general ASP.NET UI issue, so I'm posting in two forums on this one.
I have a databound Gridview (with a LINQ datasource). The gridview displays questions from the SQL DB to the user. I've inserted a radio button list into the gridview with 3 horizontal radio buttons with fixed values of 1,2,3 for the user to select. I have a question ID, a tempuserID, and AnswerValue columns set up in the database. It all works nicely.
After the user selects radio buttons, I would like for them to push a button to submit the QuestionID, the associated Radio Button Value (AnswerValue) and their tempUserID into the DB. How do I do this? I'm not sure what to do next and what VB/LINQ code to put in the code behind file in the button click event handler. I'm also not sure on what to use for the tempUserID, can I use the sessionID? I'm using VB and here's my code:
[Code]....
(Using ASP.Net 2.0 on Visual Studio 2005, coding in C#)I write in the hope that someone will be able to provide a clue as to how I might best overcome this issue:I've got a form with 2 RequiredFieldValidators, and 2 buttons. Button 1 has 'CausesValidation' set to 'False', and populates some of the other fields on the form from the database (via a postback).Button 2 fires the validation, then if the form is valid brings a javascript popup confirmation box and then, if true, it puts the data in the form into an email.All this is working fine. However......My problem is this: If I press button 2 with my required field(s) empty, the form quite correctly refuses to submit, and highlights the appropriate field(s) with a red *.But: if I then press button 1 (my populating button) it DOES NOT FIRE until I press it a second time!Code snippet follows (markup only - I will of course post code-behind if nec. but I don't think it is)
<script type="text/javascript">
function ConfirmSubmit()
{
[code]...
I am just starting with asp.net mvc and I am currently just playing around with returning data from a MySql backend. I am trying to return a set of data as a tabular list of radio buttons for each row in my data, however even though the rows come out and the data the radio buttons seem not to be rendered. This is my controller code which grabs the records and returns the view SelectOffice (if records are found).
[Code]....
And here is the view SelectOffice
[Code]....
And here is my very simple Office class
[Code]....
I have a Gridview and a UserControl on the same page. How do I prevent update button on the gridview from validating Usercontrol.
View 4 RepliesI want to use radio button on my form for users to select there sex, either male or female. I need this to reflect in the field in my access database any time they choose there sex. can anyone put me through this. Am using asp.net with VB code and an access database
View 4 Repliesradio button not working
<%
@
Control
Language="C#"
Inherits="System.Web.Mvc.ViewUserControl" %><style
type="text/css">
.style1
{
}
text-decoration:
underline;color:
#0066FF;.style2
{
}
color:
#0066FF;</style>
<table
style="width:
100%;"><thead><th
colspan="3">Submit A Referral
<span
class="style2"> </span><span
class="style1">I'm
a Sales Rep</span></th></thead>
<tr>
<td>
Email
</td>
<td>
<%
= Html.TextBox("Email") %></td>
<td>
</td>
</tr>
<tr>
<td>
Password
</td>
<td>
<%
= Html.TextBox("Password") %></td>
<td>
</td>
</tr>
<tr>
<td>
First Name
</td>
<td>
<%
= Html.TextBox("First Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Last Name
</td>
<td>
<%
= Html.TextBox("Last Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Company Name
</td>
<td>
<%
=Html.TextBox("Company Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Service Phone Number
</td>
<td>
<%
=Html.TextBox("Service Phone Number") %></td>
<td>
</td>
</tr>
<tr>
<td>
Cell Phone Number
</td>
<td>
<%
=Html.TextBox("Phone Number") %></td>
<td>
</td>
</tr>
<tr>
<td>
ADT #
</td>
<td>
<%
=Html.TextBox("ADT") %></td>
<td>
</td>
</tr>
<tr>
<td>
Address
</td>
<td>
<%
=Html.TextBox("Address") %></td>
<td>
</td>
</tr>
<tr>
<td>
Zip
</td>
<td>
<%
=Html.TextBox("Zip") %></td>
<td>
</td>
</tr>
<tr>
<td>
City
</td>
<td>
<%
=Html.TextBox("City") %></td>
<td>
</td>
</tr>
<tr>
<td>
State
</td>
<td>
<%
=Html.TextBox("State") %></td>
<td>
</td>
</tr>
<tr>
<td>
InstallationType
</td>
<td>
<%
--<%=Html.RadioButton("installationType"); %>--%></td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
</td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
</td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
<%
=Html.CheckBox("Terms",
false) %> I agree to the terms of service</td>
<td>
</td>
</tr>
</table>
i have a view wich gets in its model (among other things!) a string with the name of partialView to be rendered in a certain div.
well, in that partial view there are two radion buttons, with the same name but diferent id's and values.
when i submit the form in the view, wich also has the partialView controls (radio bts), in the respective controller i get inside a formcollection an item with both values of the radio buttons,
my question is, how can i find wich one was selected in the view?
Does anyone know how to bind a Yes/No radio button to a boolean property of a Strongly Typed Model in ASP.NET MVC.
Model
public class MyClass
{
public bool Blah { get; set; }
}
View
<%@ Page Title="blah" Inherits="MyClass"%>
<dd>
<%= Html.RadioButton("blah", Model.blah) %> Yes
<%= Html.RadioButton("blah", Model.blah) %> No
</dd>
I have a set of radio buttons for "yes" and "no" values which have a name="choice". "yes" is checked by default. They're both runat="server". I read the choice on postback like below. It works perfectly fine as long as the validation doesn't fail. For example, if I select "no" and validation fails on postback, I still see "no" selected. But if I submit the form after correcting everything, the value read is "yes" on server side! Is this a bug in .net, and if so, how do i fix this?
foreach (string key in Request.Form.AllKeys)
{
if (key.EndsWith("choice"))
return Request.Form[key] == "yes";
}
Not getting value of radio button which i disable using JQuery before page submit.
View 1 RepliesWhen the selection of the radio buttons change I would like to show/hide the panel in the next table cell. I have it hiding and showing fine but each time it causes the page to refresh to the top. Is their a way to stop that refresh? I would like to hide and show the panel dynamically.
<table>
<tr>
<td>
<asp:RadioButtonList runat="server" ID="rblPlayerStatus" AutoPostBack="true" >
<asp:ListItem>Free Agent</asp:ListItem>
<asp:ListItem>I have teammate</asp:ListItem>
</asp:RadioButtonList>
</td>
<td>
<asp:Panel runat="server" ID="pnlTeamMate">
<asp:Label runat="server" ID="lblTeamMate" Text="Choose Teammate" />
</asp:Panel>
</td>
</tr>
</table>
I am writing a condition like:
if (dt > 0) {
objinvoice.editInvoice(strInvoice, strRenew, strExpiry);
GridView1.EditIndex = -1; bindGrid(); }
I will have a radio button in gridview if that radiobutton is initially set to false and if the condition is true I would like to set it to true.
I have an application such that my fields are binded with gridview among those i will have a fieldname likely Renewed this may be Yes/No in my table. When i bind my values i would like show a radiobutton in a grid like i will have 2 radio boxes at that field namely Yes or no. If in my database field if it is saved as No i would like to show the user with No radio button as selected and if yes i would like to show the alternative
View 1 Repliesi have a web page in which i place radio button list, when i select any radio button, on printing i get light color for selected radio button, how i get selected radio button dark colour so that it can visible easily..
View 13 Replies
