We just upgraded from VS 2008 to VS 2010 and on compiling I am getting the following error:
[Code]....
Any idea what it means? It does not say what project has the problem. We do have a library built using J# in the solution.
I've been dealing remotely with a weird situation with a Windows Server 2003 virtual machine that's running a ASP.NET 3.5 website... Or, at least is trying to run it.
The website was installed using the standard installer for the project, which has been used to install at several different locations. However, this one is behaving differently.
The website fails when it runs. In the Event Viewer, the following error is reported:
Exception information: Exception type: HttpException Exception message: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
The error is reported on the website as:
Exception Details: System.IO.FileNotFoundException: The specified module could not be found.(Exception from HRESULT: 0x8007007E)
Running the fusion log viewer, I can see that ASP.NET is attempting to load the following assemblies:
CppCodeProvider, Version=8.0.0.0,
Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a
VJSharpCodeProvider, Version=2.0.0.0,
Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a
First off, there is no reason why ASP.NET should be loading these assemblies. I can't find anywhere in machine.config or any other config where these assemblies are listed as required. We tried installing the 3.5 SDK, but neither was installed. I've only got version 10 of the CPPCodeProvider on my development machine.
What the heck is going on here??
NB: don't do a cursory google search and answer. Nothing I found applies. And if anybody answers
"Define DEBUG constant" and "Define TRACE constant"
In the document [URL], I find there are some limitation in CodeDom, but I find some are invalid, such as "ValueInequality Opetator"
what is latest limitation of CodeDOM in.net 4.0 ?
Can I install Microsoft Visual Studio 2010 Service Pack 1 in Microsoft Visual Web Developer 2010 Express?
View 1 RepliesWe have developed apllication in Microsoft VS 2008 and when we opening this same application with Microsoft VS 2010. Then it's asking to convert.
So can anybody tell me what it is converting exactly. Means it's open application in Microsoft VS 2010 and running properly also. But i am understanding whats happning while converting.
I am a student of HLC, I am learning Visual Basic, they sended me lots of books and a CD with Microsoft Visual Studio 2008 Professional Edition. I have problem with installing it. There is the error;: "Setup Failed. Use the following links to research the source of the failure: There were errors during setup. Although the components were installed successfully, some setup errors were detected. View error log
For information on known setup issues, see the Microsoft Visual Studio readme file, readme.htm, located at the root of the installation source. For Knowledge Base articles on Visual Studio setup issues and solutions, see KB article 319714, HOW TO: Troubleshoot Visual Studio .NET Installation, at [URL]. To find help from other Visual Studio users, try the following newsgroups:
Visual Studio Setup
Microsoft Product Support
For details about this setup failure, see the setup
log files."
and
"The following component failed to installl: Microsoft Document Explorer 2008. The following components were not attempted: Microsoft Visual Studio Web Framework 3.0 Framework 3.5" and many other componetns. I have got Windows Vista Home Basic SP2 with 1.00 gb RAM and 2.00GHz. I all ready asked my tutor but he don't know how to make it work. There is no information on the web about this problem.
I need to write a paper on the comparison between (Microsoft Visual studio 2005 to develop web applications using asp.net) and (visual basic and Netbeans to develop j2ee applications using java).I need suggestions for good webpages,journals or documents which can help me out here. I have to write at least 1500 words
View 1 RepliesMicrosoft Visual Web Developer 2008 Express Edition not possible to open Visual Studio?
[Code]....
I currently doing a website that require to have a report for higher management, but i cant seem to have the crystal report tool in my MS Visual Web Developer.
View 2 RepliesI have upgraded to VS2010 recently. Now VS2010 is not opening i get an messg box displaying. Microsoft Visual Studio has encountered a problem and needs to close. We are sorry for the inconvenience. It automatically gets restarted and displays the same message. I have re-installed VS more than 3 times.
View 1 RepliesIn Microsoft Visual Web Developer 2010 Express, Edit->Quick Find mean item, the "Quick Find" item, everytime I have to select "Find In Files" again, how can I set "Find In Files" as default?
View 3 RepliesI am not able to find my wsdl exe in Microsoft Visual Studio 9.0. i searched in all of my SDKversionBin. but could not find it.
View 4 RepliesCan Microsoft Visual Studio 2010 Express use only 30 days? After I click Help ->About Microsoft Visual Studio 2010 Express menu, I find "Only 27 days remaining"!
View 1 RepliesI am trying to use sql spatial in visual studio 2010 with asp.net 4.Where did microsoft.sqlserver.types go?Does this mean you can't use SqlGeometry or SqlGeography in asp.net 4?
View 2 Repliesis there any way to create a site map automaticly by using microsoft visual studio 2008
if it just create an index for static pages it is enough
dont need dynamic pages
I have a web application develped using VS2008 and the Dundas Charts add-on. I understand that Dundas Charts is no longer supported by Dundas and now belongs to Microsoft. I found what appear to be the chart controls and VS integration downloads:Microsoft Chart Control for Microsoft .NET Framework 3.5Microsoft Chart Controls Add-on for Microsoft Visual Studio 2008What I do not know is what happens if I install these downloads. Does my original Dundas software cease to work? Does the new MS Chart software work like the Dundas version did and is fully compatible with my existing charts? Do I need to rebuild my web sites using the MS Chart integrated software? Does the old Dundas dll file in the in folder have to be replaced or will it work as is? I have not found anything that describes how to install and use this software and the functional differences from Dundas to Microsoft ownership.
View 1 RepliesBefore I download and install something from a third party that I regret, does Microsoft offer a video control? If not, what is a safe product I can use with Visual Studio 2008?
View 6 RepliesHow can I turn off the loading and downloading of Microsoft symbols?
I downloaded the Microsoft debug symbols for some other tasks but now I no longer want them for current debugging.
I'd like to keep them in the temp directory in case I want to turn them back on.
It's slowing down my debugging.
Currently, I need to use this Microsoft Report Viewer to create several reports.
The problem I'm having is that within the Microsoft Report Viewer, there are 2 functions. The 2 functions are the print function and also the export function.
I'm connected to the local host only for this project.
I have list of tables in my database.
how to retrieve list of tables including data into databound control and
how to export the tables data to excelsheet individually..
a)Gets the list of tables within the database
b)Gets data
c)Exports the data to excel worksheets (there are 2 methods defined (1) range method (2) cell by cell
d.) Saves the excel sheet
I'm trying to use the Entity Framework with a Firebird database in Visual Studio 2010
Useful info:
Windows 7 64-bit
Visual Studio 2010 Ultimate
Firebird 2.5.0
Firebird .Net Data Provider 2.6
DDEX 2.0.5
I've done:
Installed Firebird server (and it works and I can connect to a database) Downloaded DDEX (I've run the registry files) used the gacutil on the FirebirdSql.Data.FirebirdClient.dll and checked that it indeed was installed and it was Modyfied the machine.config for both 2.0 and 4.0 in 32-bit and 64 bit folders to include the provider in the element When I try to add a connection in the server explorer I choose "Firebird Data Source" and the Firebird data provider and press continue. I the "Add Connection" dialog window I fill in the info "data source, database, user, password.." and press ok and then I get the following error:
Failed to find or load the registered .Net Framework Data Provider Also when I try to add a new Entity Data Model I cannot see the Firebird option.. I can only see SQL options. I really need help on this one as I've spent many hours on this and I cannot get it to work.. I've also read other related questions on SO,
I have create a new website with vs 2013, i have sql server 2008 data base on my server. I am using defautl memberships table of sql server for login and and roles. it works fine with vs 2010 but when i use the same web.config setting in vs 2013 and try to login it gives me following error.
Invalid column name 'Email'.
Invalid column name 'EmailConfirmed'.
Invalid column name 'PhoneNumber'.
Invalid column name 'PhoneNumberConfirmed'.
[Code] ....
How to do sum 2 differences fields as a new column in Subtotal ? I know to do in Microsoft Access and that is easier.
View 2 Replies I just migrated myDocuments folder to a new laptop (windows 7, 64 bit). The visual studio project WAS working on my desktop computer (windows XP pro).
Runtime error is:
ASP.NET runtime error: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f
It references the config file, so I am looking to see if I need to add something in there or what?
I just used the wonderful tool Microsoft Ajax Minifier and it's working very well when I build my MVC application on my machine but when I check-in in source control and started build by the Team Build 2010 it doesn't create the min files, for sure I can't put the mini files inside the source control as the recommendation from the Microsoft Ajax Minifier because it's like the dll it's generated every time you build your application so no need to put it in source control beside it can't be because you will need always to check-out this file to build and this will prevent other from build using the team build, so what I need to do to make generate the mini file with team build 2010?
View 1 Replies