Visual Studio :: Failed To Start Monitoring Changes To OS
Jun 29, 2010
got a new bigger, better, faster pc at work. Installed VS 2008 and went back to normal developing in VS 2008 on my pc, with the files on our dev server, which is on the network. But, whenever I set a breakpoint, and enter Debug mode, I get this error: An error occurred loading a configuration file: Failed to start monitoring changes to 'ServerABC' because the network BIOS command limit has been reached. For more information on this error, please refer to Microsoft knowledge base article 810886. Hosting on a UNC share is not supported for the Windows XP Platform.
View 1 Replies
Similar Messages:
Aug 28, 2010
im using a IIS 6, WinXP OS, Visual Studio2005, Visual Studio 2005 Server..I have build an asp.net web application in another computer.. i wanted to access that program that i made to another computer but it gives an error when i try to run the program..this is the error it says:"Failed to start monitoring changes to "S:sgcwebapplicationaspx" because the network BIOS command limit has been reached. PLease refer Microsoft lnowledge base article 8180886 Hosting on UNC share is not supprted for the windows XP platform...."Is it because i develop the program using WinXP OS?how can i be able to share the program that i made to another computer????
View 1 Replies
Apr 8, 2010
on desktop start has disappeared, getting above issue on double clicking/running any application.have VS2005 installed with sp1 and all other relevant updates as per MS..., i read some forums which states because of VC++ the system files may be currupted....have not installed VC++can anyone guide me the issue here and its solution...
View 3 Replies
Jun 3, 2010
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 Replies
May 10, 2010
suddenly, with my Visual Studio 2008 I can no longer debugging my web applications (ASP.NET 3.5). I obtain this error: Unable to start debugging on the web server. Click Help for more information. Auto-attach to process [8360] w3wp.exe' on machine 'DELL' failed. The weird thing is that I haven't done special changes to my IIS.
View 1 Replies
Feb 9, 2011
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 Replies
Nov 22, 2010
I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
View 5 Replies
May 12, 2010
I have an web application that I'm working on, it was working fine until my curiosity got the better of me and I right-clicked on a view and chose Set As Start Page option. Now, whenever I run my application it takes me to the Resource Not Found error page. I have the default register route set in my Global config route which was working fine before.
View 2 Replies
Aug 3, 2010
I have one dot net application giving me grief. The Start Arrow button is disabled. Also, the Debug --- Start option is disabled as is the Debug --- Start Without Debugging option. It runs fine from IIS and if I right click and view in browser. It is only this one appliction. I got a fresh version from VSS and no better.
<compilation defaultLanguage="vb" debug="true" />
View 2 Replies
Jan 31, 2010
Something happened on my work computer where the Start Page for a website is not saved. I now need to save the start page every time I open a web site project (which is quite annoying).
I have confirmed that this is happening by also seeing that the Property Pages do not retain the setting either. This happens for every web site project as well.
Where and how does .NET 2008 store the start page setting for a web project? I have looked in the solution file, but could not find it there.
View 6 Replies
Jan 11, 2010
When i try to run my web application in visua studio 2008 a error window comes out that says: Unable to start program [URL]. The system cannot find the file specified. I googled but not got the solution for this problem. I have VS 2005 and VS 2008 both on my machine. I also unistalled VS 2008 and reinstalled it but that does not solve the problem.
View 5 Replies
May 5, 2010
I have a solution I have been working on over the last few weeks with a 3 or 4 projects in that used to build and begin debugging in under 10 seconds.The solution contains 3 dll's and 1 mvc project.
As of today, it takes about 2 minutes to start debugging, it keeps pausing on "loading symbols for ccpCodeProvider.dll".
I'm debugging on the internal vs development server, and I haven't changed anything since yesterday?I haven't ever used symbols before, and I'm not trying to debug the framework or anything, I just want my stupid web project to run.I created a new solution from scratch and added a random console app, and that also takes forever to debug.
View 2 Replies
Aug 2, 2010
When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
View 2 Replies
Oct 13, 2010
At work I'm tryhing to upgrade an ASP.NET 2.0 app (which we wrote using VB.NET 2005) to ASP.NET 4.0. I had a few problems during the upgrade, but eventually worked them all out. At the end of the day I decided to give it a quick compile and see if I'd get the start page, so I hit F5 in VS 2010. I left it that way, and man was it acting weird. VS 2010 wasn't responding to anything. If I hovered the mouse over VS 2010's minimize or close buttons, in the upper right corner, then those buttons were flashing very rapidly. I'm not sure what was going on. After waiting 15 minutes to see if it would come up, I decided to try clicking on the close button. Nothing happened. Eventually, I had to leave (I take public transit, and I have to leave when the bus comes)But what I want to know is this, is this pretty standard behavior? Does it normally take this long to do this? This website is of modest size (<100 pages).
(Later) When I came into work today, 8 hours later, VS 2010 was still doing whatever the heck it was doing, but basically it wasn't responding to anything.
View 1 Replies
Aug 6, 2010
I am getting an error "Unable to start debugging on the web server..." while running as web application in VS2005. But the error seems only for this application. I created a test application, both in VS2005 and VS2008, and found no issues in running these applications.
View 1 Replies
Jun 16, 2010
I used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to
build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
View 2 Replies
Jul 19, 2010
Unable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)
View 2 Replies
Jan 12, 2010
I have recently installed VS2008 standard edition after using VS2008 express and VS2010 Express (on this same laptop) running Windows 7 Build 7100.
On clicking "Debug" the error appears:
"Unable to start program
[URL]
The debugger is not properly installed. Cannot debug the requested type of code. Run setup to install or repair the debugger."
This is for a Web Site - File System originally created in VS2008 express.
View 5 Replies
Jan 4, 2010
Why is there no default 'create/open' access to 'WebSites' from the VS2010 start page?
Background:I've succesfully been developing ASP.NET web applications (via WebSite method ((((Not WebProjects)))), using VisualWebDeveloper) for roughly 3 years. Personally, I prefer the WebSite method or strategy due to the decrease in both size and complexity (the web applications I build are generally for around 50-100 simultaneous users logging in and out and constantly manipulating data). I will continue bulding my sites via the 'Website' method provided VS2010 doesn't begin it's deprecation.The root of this question (which boiled into this post) came from perusing this article and this video tutorial. It's a shame to see functionality that brings with it an overall ease of use and increase in production capacity by decreasing both size and complexity of web application development... downplayed.
If the Visual Studio 2010 Development Team left this functionality out for a reason, I would very much like to know. So that I know what is going to be "sponsored by Microsoft" in a couple of years and I don't waste another second considering using the 'WebSite method' as a viable solution (as I know that I can't stick with vs2008 while rest the development community gets to evolve with the innovations implemented within vs2010)... WebSite method or the WebProjects method.
View 4 Replies
Jul 27, 2010
There are no errors or warnings on my VS2008 Web Application Project but when I try to publish, it fails. How can I view the VS2008 publish log?
View 1 Replies
Oct 23, 2010
When I tried to deploy the project using DotNet 2.0 using VS2010, it failed and no error message. I make sure all the Framework checkboxes have 2.0 checked. In the prerequisies window, I only checked the installer 3.1. In the Detected Dependencies, The Microsoft .NET Framework is 2.0. The development and target PCs are both XP - SP3. When I unpack the .msi file in the target PC and run the application, it crashed.The only way to make that work is to use VS2005 to perform the setup. Of course, copying the files over to the target PC directory works. So, the VS2010 setup is unpacking something at the target that makes it crash. VS2010 fixed the code-behind fatal bugs and I cannot go back to VS2005 or VS2008. I also noticed that you need to install 3.5 before you can use 2.0 in VS2010... Anybody knows what is going on ?
View 3 Replies
Jan 31, 2011
i got this error while installing vs 2010 setup.anybody have any idea why this problem occured?
CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[2] DepCheck indicates Microsoft Application Error Reporting is not installed.
[2] DepCheck indicates VC 9.0 Runtime (x86) was not attempted to be installed.
View 2 Replies
Mar 14, 2011
I just upgraded my development machine from Crystal Reports XI to Crystal Repors XI Rel2 so I could use the Graphic Location feature in CR. When I run my site locally, reports work great. When I deploy to the server, I get "Database logon failed." The Crystal Reports are not connecting to the database. They are connecting to datasets that are populated at runtime. The network admin said he upgraded CR on the server. The references in my solution that work when my app is deployed to the server are version 10.5.3700.0.
The references that do not work are 11.5.3700.0. I have made no other changes to my .net code.
View 1 Replies
Sep 14, 2010
Login Authorization Failed on WAP phone browser
View 2 Replies
Mar 4, 2010
I have a managed dll compiled in vc++ 2005 with .net 2.0 works fine in visual web 2005.I upgrade my VW to 2008 and add the same dll to a project but getting a compile error.VC++ 2005
public ref class Class1 {
public: Class1(){
b1 = gcnew array<System::Int16>(50000);};
[code]...
View 1 Replies
