Visual Studio :: Operation Could Not Be Completed - Unspecified Error In VS 2008
Dec 18, 2010
Now i'm using visual studio 2008 for my web application project development. I had more than 80 forms and more than 20 modules include with it. Today morning i working with my applicatons normally. Suddenly i cant debug my applications but when i tried to run the webform by View in Browser option, The seperate form shows the page and output. And i cant dubug or Run my Whole project manually. When i tried to debug the applications, suddenly the below error pop-up will displayed without any debuging.
The Operation Could not be completed. unspecified error
View 1 Replies
Similar Messages:
Jul 8, 2010
Invalid column name 'is_compressed'.
Invalid column name 'compressed_backup_size'.
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
Processed 264 pages for database 'E:ASP.NET4.0_CalculatorhicalcApp_DataASPNETDB.MDF', file 'ASPNETDB_1847a276f17a4e2cb63c95936431bc26_DAT' on file 1.
Processed 1 pages for database 'E:ASP.NET4.0_CalculatorhicalcApp_DataASPNETDB.MDF', file 'ASPNETDB_TMP_log' on file 1.
BACKUP DATABASE successfully processed 265 pages in 0.404 seconds (5.124 MB/sec).
[Code]....
View 3 Replies
Apr 23, 2010
One of them is a website and when I have to compile it, it lasts 3 minutes. I think the problem is in some operation that VS2005 do when is validating the website cos in the output screen stays 2 minutes or more in this line :
VEH.HPARCIALES.Neg -> C:TS5GIAVEH v.1.0GIAVEH v.2.0HomologParcialesHomologParcialesVEH.HPARCIALES.NeginDebugVEH.HPARCIALES.Neg.dll
------ Build started: Project: http://localhost/HomologacionesParciales/, Configuration: Debug .NET ------
and then the "Validation of website completed" line appear and the project is launched in a normal time...So the question is What VS2005 do while validating the website?I have 20 references in the website bin folder I don't know if this could be one of the problems..
View 1 Replies
Jan 6, 2010
Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?
View 5 Replies
Mar 8, 2011
My question is i have developed a simple ifelse SequentialWorkflow in VS 2008.
when i try to deploy workflow on sharepoint portal system generate the following error message.
"The operation could not be completed. Interface not registered "
same error occur in Machinestate workflow.
View 6 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
Jan 8, 2010
I had to reload vwd 2008 express and sql 2008 express on my laptop. After loading cannot launch vwd, get this error message. Can anyone please suggest a remedy "Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed."
View 1 Replies
Apr 14, 2010
As stated in the title my web application builds successfully, although every time I run it in debug mode I get the following .Net error:
If I hit refresh then the application gets no more errors until I next start it up again, any ideas?
Here is my global.asax file:
<%@ Application Language="C#" Inherits="MyCompany.Web.MyApp.Shell.CustomWebClientApplication" %>
<script runat="server">
void Session_End(Object Sender, EventArgs e)
{
FormsAuthentication.SignOut();
}
protected void Session_Start(Object sender, EventArgs e)
{
if (Session.IsNewSession)
{
Response.Redirect(System.Web.Configuration.WebConfigurationManager.AppSettings["HomePage"]);
}
}
protected void Application_Error(Object sender, EventArgs e)
{
System.Exception oops = Server.GetLastError();
//Injection attack error handling
if (oops.GetBaseException() is System.Web.HttpRequestValidationException)
{
Response.Redirect("ErrorPage.aspx");
}
}
</script>
View 4 Replies
Jan 31, 2011
I have one text box control on aspx page in my .net application.
and in code behind on page load event i wrote:
txt.Text = "Sample"
Now if build website on system [ windows XP ] it build properly but on system [ Windows 7 Enterprise ] it showing following error:
" Name 'txt' is not declared "
What would be the reason.Is that environment specific problem.I am using VS 2008.
View 1 Replies
May 21, 2010
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Replies
Jun 1, 2010
Im trying to install VS 2008 on Server 2008 R2. As I try to run the Setup.exe file I get this Error:
The procedure entry Point BaseGetProcessDllPath could not be located in the Dynamic Link library KERNELBASE.dll
View 1 Replies
Apr 7, 2010
Solution,I had also moved ashx and asmx files at the same time as this. The Class attribute of the WebService/WebHandler directives were pointed at the wrong namespace. The moral of the story is to make sure you view the markup for all as*x files you change the namespace for by right-clicking on them and choosing "View Markup".
I'm experiencing the same problem as in this question and this link, but none of the answers fixed my problem. (edit: Setting the web.config batch attribute works, but that's a coverup, not a solution)
The problem I'm having is with a User Control that I moved from the root directory to a subdirectory within the same Web Application project. It used to work fine before I moved it. When I moved it it started giving me the error message.
It's saying that the class name exists in two dll files in Temporary ASP.NET Files. Sure enough, when I open Reflector, it's in two dlls.
If I rename the class and ascx file, everything works fine. No usages of the original name exist within any of the files in my entire application. When I rename the file, I opened all of the dll files in Temporary ASP.NET Files with Reflector, and no references to the original class name exists.
So where's this phantom reference coming from how can I fix this?
Edit: I literally grepped every file in my working directory for the solution and my temp directory for the old class name and deleted every file that contained it. I then renamed back to the original, broken name and I still get the error.
Server Error in '/' Application.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following
specific error details and modify your source code appropriately.
Compiler Error ssage: CS0433: The type 'ASP.dashboard_badusercontrol_ascx exists in both 'c:Docunts and SettingsmeLocal
SettingsTempTemporary ASP.NET Files oot3c2b7e1f2e8a7620App_Web_badusercontrol.ascx.a57ad085.iljdmp1p.dll' and 'c:Docunts and SettingsmeLocal SettingsTempTemporary ASP.NET Files oot3c2b7e1f2e8a7620App_Web_bhdqaimy.dll'
Source Error:
Line 1098: Line 1099:
[System.Diagnostics.DebuggerNonUserCodeAttribute()]
Line 1100: private[code].....
Edit:Ok, so I did some more testing on what works and doesn't work.Let's say the original file name was "BadUserControl.ascx" in namespace "MyNamespace".
I moved the file to a directory called "NewDirectory" and changed the namespace to "MyNamespace.NewDirectory". There are no copies of "BadUserControl.ascx" anywhere else on my HDD. I double-checked my TFS history to ensure the ONLY difference is the addition of ".NewDirectory" to the namespace in the markup and code-behind files.
Inside of this namespace are two other user controls named "OtherUserControl" and "AnotherUserControl".
This situation fails:
I have 2 Register directives:
<%@ Register src="BadUserControl.ascx" tagname="BadUserControl" tagprefix="uc1" %>
<%@ Register src="OtherUserControl.ascx" tagname="OtherUserControl" tagprefix="uc2" %>
These situations work:
1) I keep "BadUserControl.ascx" named as is.
I have 1 Register directive on a page in the same namespace:
<%@ Register src="BadUserControl.ascx" tagname="BadUserControl" tagprefix="uc1" %>
2) I change "BadUserControl.ascx" to "GoodUserControl.ascx"
I have 2 Register directives:
<%@ Register src="GoodUserControl.ascx" tagname="GoodUserControl" tagprefix="uc1" %>
<%@ Register src="OtherUserControl.ascx" tagname="OtherUserControl" tagprefix="uc2" %>
3) 2 Register directives without BadUserControl.ascx at all:
<%@ Register src="AnotherUserControl.ascx" tagname="AnotherUserControl" tagprefix="uc1" %>
<%@ Register src="OtherUserControl.ascx" tagname="OtherUserControl" tagprefix="uc2" %>
View 8 Replies
Jan 20, 2010
i am using the combobox ajax control i in design time i am having an error:
there was an error rendering the control. Request is not available in the context.
View 1 Replies
Jul 11, 2010
Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. make sure the user has a local user profile on the computer. The connection will be closed.
View 1 Replies
Sep 11, 2010
i have created a login.aspx file in visual web developer .now i want to connect the username and password details to SQL database
View 1 Replies
Feb 25, 2011
When i compile my vs2008 solution which is a web application in debug mode i keep getting message box displayed which says that it cannot connect "whatever.designer.cs". Can
View 2 Replies
Jan 20, 2010
can Visual Studio 2008 be All-In-One tool to integrate source code continuously from team members, build, unit test?
Having used Visual Studio Team Edition 2005, unit testing each method within VS itself. I strongly believe that it is feasible to add-on tools. Example ankhsvn tool to use SVN from Visual studio [URL]
In my investigating i have come across number of tools(shown below) to use with Visual Studio 2008 professional
Development tool:- Visual Studio 2008 professional using Subversion as source control tool. Continuous Integration:- Hudson or Cruise control Build tool:- NAnt Testing:- NUnit, Selinium As Visual Studio 2008 can be used for unit testing I think NUnit is out of consideration.
In the same way i would like to have any other tools/add-ons to Visual studio to implement continuous integration, building and unit testing. This process should be automated such a way source code between team members is continuously integrated, built and unit testing is done as configured.
Objective is to use few number of tools as add-on to Visual Studio or achieve most from Visual studio itself (example unit testing). Visual Studio should be all in one tool.
I am aware that Team Foundation Server best suits my requirement, but it is out of scope due to its cost.
View 3 Replies
Sep 13, 2010
Whats this error is and whats the solution. Multiple-step OLEDB Operation Generated Error.
View 5 Replies
Nov 18, 2010
When i was building my project in my local machine it was giving me the below error...."Error 1706:An installation package for the product Microsoft Visual Studio 2008 Shell(integrated mode)ENU cannot be found!!!Try the installation again using a valid copy of the installation package 'vs_shell.msi'"
View 1 Replies
Feb 2, 2010
Background: I use SQL server 2005 developer edition and visual studio 2008. Visual studio 2008 is running on a local machine with Vista business edition. SQL server is running on a remote server using Windows server 2003. Both computers are within the same domain.
Problem: First, I used the server explorer to connect to the SQL server. Everything works as desired. Then I write code to do the same thing. I keep getting the following error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
However, I used the exactly identical connection string as the one used in the server explorer. So connection string should not be the problem. In addition, I tried the test code in MSDN, which tells whether my domainusername can flow the network. It turns out the user name is fine. I also went to the SQL server management studio and found the login for my computer is NVCWeihao while my computer login name is NVCweihao. I am wondering if this uppercase letter really affects the connection.
View 2 Replies
Aug 8, 2010
I downloaded Visual Studio 2008 Professional Edition via torrent.
It was working fine for months & i formatted my comp & when i tried to reinstall it is not getting installed !
It shows the following error !
and the error log file seems to be like this...
BUT.,
I'm able to use Visual Studio & i'm able to work in it....
I'm re-installing since 2 days for more than 4 times...
View 1 Replies
Mar 1, 2010
I have VS 2008 Professional Edition.....I want to test a function like this:
public int getIdByName(string name)
{
var item=from x in DATAB
where x.name=name
select x.id;
.
.
return idValue;
}
now I test end I have:
[TestMethod()]
public getIdByNameTest()
{
string name="Bob"
int expected = 1;
int actual;
actual = ClassGET.getIdByName(name);
Assert.AreEqual(expected, actual);
Assert.Inconclusive("Verify the correctness of this test method.");
}
The error in "test run" is:
Failed ......[Class]....... Test method threw exception: System.ArgumentException: The specified named connection is either not found in the configuration that is not for use with the EntityClient provider or thought is invalid
View 7 Replies
May 28, 2010
How can I ensure that web application converted from 2003 visual studio to 2008 visual studio
to have two files as it is when create a web file in visual studio 2008.The web application is in Chsarp. I have converted these filesfrom 2003 to 2008 but they still have three files each.
View 4 Replies
Aug 11, 2010
I am trying to convert guidance package of vs2008 to vs2010,
followed instructions as per this link {http://msdn.microsoft.com/en-us/library/ff697211.aspx}
and getting error as
Error 1 The "GenerateMenuResource" task failed unexpectedly....
View 1 Replies
Jan 18, 2010
i am downloading thr Visual Stuio 2008 Professional Version from microsoft website which is a 3.1GB software and a trial version which expired after 90 days, i want to know this trail version includes everything ?
i am confused by reading this on the VS2008 download page :
"Instructions
Visual Studio 2008 Professional Edition is a comprehensive set of tools that accelerates the process of turning the developer's vision into reality. Visual Studio 2008 Professional Edition was engineered to support development projects that target the Web (including ASP.NET AJAX), Windows Vista, Windows Server 2008, the 2007 Microsoft Office system, SQL Server 2008, and Windows Mobile devices.
This Trial Edition is fully functional but will expire after 90 days. This trial software is not supported by Customer Services and Support (CSS)"
[URL]
View 3 Replies
