I have created 4 WebPartZones in my aspx page.
I need to add usercontrols dynamically to ZoneTemplate of each WebPartZone by reading a config file.
How can i dynamically add controls to Zonetemplate of each webpart at runtime
by default closed webparts are listed in catelog zone vertically
for example,
[checkbox] [webpart 1]
[checkbox] [webpart 2]
[checkbox] [webpart 3]
any one guide me which property is used to list them horizontally?
i want them like
[checkbox] [webpart 1] [checkbox] [webpart 2] [checkbox] [webpart 3]
I have developed a webpart.., and i have requirement now when i click on the edit ....a custom template should be displayed consisting a text box conbtrol and save and cancel buttons. when i click on save button the values shoud be saved in one of the personizable properties of webparts..
View 3 RepliesIs there a way to add the same webpart to multiple pages across a site (using shared personalisation) without the use of masterpages?
View 5 RepliesI am having a .net project that builds the web based installer. I was using visual studio 2005 environment and the project is targetted to .Net 2.0 framework earlier. I don't see any issues with installing the product that was builted from above environment.
Recently i migrated to Vs2008 and .Net 3.5 framework and the i was facing the following issue. During the installation the web browser( opened in IE 6.0) is getting opened in INTERNET Zone which applied higher security settings including disabling of all Java scripts.The browser was not responding any click events( next or back or cancel).Copying the URL to the new IE doesn't have this issue. I am not sure whether it is an environment issue or not.
When in the Catalog Zone, I select a Web Part and a zone in which to put it and then click Add. I need to know immediately which zone has been selected in which to place the selected Web Part.
My Catalog Zone is declaratively a class called CatalogPart1 which inherits the CatalogPart class:
[code]....
But I cannot work out how to use this event to get the Zone that has been selected.
How do I get the Zone that has been selected?
I have followed this link and it seems to work in the sense that it adds webparts from my XML file successfully.
[URL]
However, the actual controls themselves are never displayed and their respective page loads are never called.
The controls themselves work fine if I hardcode them into the catalog zone and inherit them from user controls but when I change their inheritance to webpart and try and use the control from this example, as mentioned nothing appears. Clear as mud?
An example of a control -
public
partial
class
hello :
WebPart
{}
<%@ Control
Language="C#"
AutoEventWireup="true"
CodeBehind="hello.ascx.cs"
Inherits="Controls.HomePage_Controls.hello"
%>
<asp:Label
ID="lbl1"
runat="server"
Text="Hello"
Font-Bold="true"
Font-Size="Large"
ForeColor="Blue"
/>
I'm trying to add an DropDownList to a DetailsView by code, because i'm writing a solution that let's the user select an table and view your records and edit them, some of theese tables, have a foreign key column and the user must have to select some item in the list.
Below is my sample code:
[Code]....
the code above is working correctly, when the user click in the buttons New or Edit , the DetailsView opens correctly, showing the DropDownlist, but when the user click in the buttons update or insert , an error occurs, the viewState cannot be loaded:
Failed to load viewstate. The control tree which viewstate is being loaded must match the control tree used to save viewstate during the previous request. For example, when controls are added dynamically, the controls added during a post must match the type and position of the controls added during the initial request.
i create a custom control which can hold some templates, such as Header, Body Footer, etc.
[Code]....
i tried to use smarttags to allow the user to edit each of the templates, which worked pretty well. what i could not get working was to add a template if it has not been in the control. eg. add a header-template to the control above. i tried using the RootDesigner.AddControlToDocument() function of my controldesigner. but this function gives me an error, telling me the control i'm going to add the template (i used a new HtmlGenericControl("HeaderTemplate") as new Control) to is not valid. (i can't give the exact error message, cause i use a german version of visual studio 2008) i've been searching the web for nearly half a day now, but i did'nt find a working solution for my problem.
I have a datalist that is populated via and SqlDataSource. Code is VB
I am trying to extract two Values from the Item Templete and add them together. Then I want to add a new Label to the item template with the sum of the two added values.
I am able to to this using a GridView but no success with the datalist
My form code:
<asp:Label
ID="SDLabel"
runat="server"
Text='<%# Eval("SD") %>'></asp:Label><br
/>
SDT<asp:Label
ID="SDTLabel"
runat="server"
Text='<%# Eval("SDT") %>'></asp:Label><br
/>
SDS:<asp:Label
ID="SDSLabel"
runat="server"></asp:Label><br
/>
My VB Code behind Starts out:
[Code]....
Well.I have one ready made free website template. it's incudes images folder with images * html page & one style sheet document..i already use html content in my aspx page But i want to do some editing on this Html page ....How can i startsExample :- I want to free some space on ready made temple..& put some images... put some hyperlink.so how can i starts? is any software available.? if yes provide me links
& can i do apply this temaple in Masterpage so this i can use same desing over maltiple pages..?
I have a formview with various templates set up for a database that has 255 columns. I need the insertitemtemplate to pre-fill values based upon a specific selection by the user (just like the edit item template) but when the template is switched to insertitemtemplate every text box is cleared. The idea is that a new entry is usually made by making minor changes to an existing entry. With 255 fields I don't want to require the user to enter every field when only three or four need to change.
View 8 RepliesI have a gridview which the columns are created programmatically.
When a button is click i will clear all columns and add the columns that I want. Im adding a boundfield which is not a problem. When I add a template field, I must add also the item template which is my problem.
How can I add a item template in the template field I created which is binded in my datasource. Also what event handler should I use to do this.
Here's the part of my code:
[Code]....
Someone know how can I bind a label item template from the datasource. The label item template should be firstname + middlename + lastname.
If im not doing it programatically, it will be just concatenating eval(). But how can create item template and bind it programmatically?
Setting up the editItem template of a gridview. I have a template field with a dropdown list for editing. When the gridview goes into edit mode the dropdown list is displayed with all the right options but the current value of the field (pre-editing) is not the selected value of the dropdown list? How do I make that happen? I have a couple fields where the editItem template will use a dropdown list and I'm sure a user will not realize those values have changed and they will just edit what they intended to edit and save the changes, inadvertently also making changes to other fields.
View 3 RepliesI am trying to implement a webpart control with some ajax functionality and I just realized that when the webpart is on the page in shared view and the user is not logedin then the webpart/ajax control does not fire the OnPreRender event and so the scriptcontrol does not get registered....
even tried puting a simple hovermenuextender on a webpart control and the same error occurs:
"Extender control 'HoverMenuExtender1' is not a registered extender control. Extender controls must be registered using RegisterExtenderControl() before calling RegisterScriptDescriptors(). Parameter name: extenderControl"
this only happens when a webpart control is on the page in shared view and the user navigates to the page without being logged in....
I have a gridview that I am dynamically creating and populating.
GridView myGrid = new GridView();
myGrid.Showfooter = true;
myGrid.Columns.Add(new BoundField() { HeaderText = "Serial #", DataField = "serial_number" });
...
...
...
myGrid.DataSource = myDS;
myGrid.DataBind();
My problem is that I'm having problems figuring out how to add a templatecolumn with a dropdownlist in it.
I am running .net 4.0 asp.net app on IIS 7. I want to know if there is an easy way of adding rows to an excel 2007/2010 (not too fussed) template file that a user can download from the server.
For example, the user might check a couple of tick boxes and clicks a button on the web page. The server does a sql query on a table and comes back with the results. I have an excel file with some headings, column titles, formatting etc. on the web app's resources directory. I want to make a copy of this file, insert each of the results as a row into this file (insert first name into cell A3, last name into cell B3 etc.). And make it available for the user to save on their disk.
Since Excel (xls) format is an "Open format", I was wondering how easy/straight forward this would be. Is it a matter of loading the excel XML DOM and inserting XML elements? What are libraries I need to use?
I read an article on the www.4guysfromrolla.com which tells to store gatetime in getutcdate() in the database.and while displaying use javascript
[Code]....
But one came to my find that if i want to show something time critical data on page load,then how would i call javascript before page load,
I have a page that has 5 zones, by default have also defined the layout.
Now I need to restrict the user to have only one web part control in a zone at a time. Is that possible? Currenty we can add more than one control in the same zone.
can i create webparts controls for Sharepoint 2007 in Delphi Prism? If yes, how?
View 1 Repliesspecify method to remove web Part Zone names.
View 3 RepliesI want to hide the dropdown in PageCatalogPart, which lists the Available Zones.I want to programmatically add the closed webpart to the Zones and not allow the user to select zone.
I'm using a UI that works with webpartzones, I created a class that implement ITemplate , zones are created but drag and drop is allowed just inside the container zone(webpart).
View 2 RepliesHow to set default time zone in ASP.Net Application?
View 1 RepliesI am trying to implement a webpart control with some ajax functionality and I just realized that when the webpart is on the page in shared view and the user is not logedin then the webpart/ajax control does not fire the OnPreRender event and so the scriptcontrol does not get registered....
even tried puting a simple hovermenuextender on a webpart control and the same error occurs:
"Extender control 'HoverMenuExtender1' is not a registered extender control. Extender controls must be registered using RegisterExtenderControl() before calling RegisterScriptDescriptors(). Parameter name: extenderControl"
this only happens when a webpart control is on the page in shared view and the user navigates to the page without being logged in....