I have a listview that is bound to a datatable on the runtime. The listview has a <ItemTemplate> format which includes a lot of controls. On the page Load I do bind the listview to a datatable. Now, I want to add more ListView Items without databinding the whole listview and maintain the same ItemTamplate.
View 14 RepliesThere is a page in my project named Messages.aspx that shows the messages received [but obviously], using the ListView control.
I want that the user should be able to see the body of the message on the same page [Messages.aspx] just by clicking the subject of the message, which is ofcourse a link.[Messages.aspx?msg_id=some_id]. Hence the user would actually reload the same page to read the contents of the message.
Now what I want is that I should be able to write some code that would change the <LayoutTemplate> and the <ItemTemplate> of the listview during the runtime. [in the page_load event of course]
Previously the listview would look like this:
[Code]....
After the clicks any message to read it and the page gets loaded, I want the layout of the listview to look like this.
[Code]....
I have 4 Checkboxlists, if i check 1st item of checkboxlist1 -- > populate items in checkboxlist2 if i check 2nd item in checkboxlist1 -- >populate items in checkboxlist2 with last selection as well as 1st checkboxlist items. So I need to Append items in Checkboxlist with existing items and also with previously selected Checkox. Is it any way except DataTable ?
View 2 RepliesCan you append items to a listbox?
View 13 Repliesi have a class Parent in which i have a drop down list (ddlNames) it contains some name
i have another class Relatives form this class i want to append some more names to ddlNames
I am using Jquery and Ajax to add new record into the database. After successfully insert the record, I want the listview I have to automatically append the previous added record.
The record can be added successfuly into the database and the only problem is I want them to be display in my listview after I click submit button. So is there any solution for this?
Below is my code:
[Code]....
[Code]....
[Code]....
[Code]....
[Code]......
It always displays ONLY 10 items although there are 30 items in the datatable. If i use GridView ALL the 30 items are displayed just fine.
How to add Items in the Dropdown at the Runtime..?
View 2 RepliesIs it possible to add tooltip on dropdownlist items?
If yes, I want to implement something as below:
While loading dropdownlist I have...(in c#)
Dropdown.DatavalueField = "request_Category_ID";
Dropdown.DataTextField = "request_Category_Name";
Now, I want to add request_Category_Description as a tooltip on each items in Dropdownlist.
How to get repeater values in single text box
Like
in my repeater control having 4 values
name
adress
Phone
Price
I want these 4 values in single text box.
So I have a ListView (assignmentsListView) in an UpdatePanel, being filtered by a DropDownList in the same UpdatePanel. The DropDownList has a list of persons in it and uses autopostback, and the ListView shows the tasks those persons are assigned to.
I am trying to use code similar to this:
[code]....
When I first load the page, the DropDownList shows the first person in the list, and the ListView correctly shows that persons tasks.
If I then select a person who I know has zero tasks, I get an error at the RegisterPostBackControl() method, saying the passed-in control cannot be null.
When debugging, at the RegisterPostBackControl method, it shows that the ListView Items collection has >0 elements in it (the number of elements matches the person selected before the current person).
How can i get the number of a listview records (or the index of the last record) from within the ItemDataBound event ? I would like to hide one of the controls in the last record, how can i know if the item is the last one ?
View 2 RepliesI am looking for a way to set a listviewitem backcolor programaticaly based on a value of a datafield.
View 4 RepliesIs there a way where I could copy all the asp:ListView ItemTemplate Items into a DataTable?
My ListView Items contain TextBoxes and Labels.
I am using 2 listview. One is attached to the datasource and other is not. So in order to show the headers, I filled in the emptydatatemplate.I have a command on the 1st listview "Add", on clicking of which I should remove the item from that listview and add it to the 2nd listview.the datasource of the 1st listview is a stronglytyped list.Kindly help me, how to achive the moving of items from one listview to another and what should be the setting of the 2nd listview to show the headers.
View 1 Repliesi have the following problem. i'd like to use a listview with paging for mulitple selection of items in a list. The selection is no problem. I do have f.i. a list which holds the key values.
List<Int64> selectedList =
new
List<Int64>();
As soons as the user makes a selection or removes a selection the list will be updated accordingly. Also hold this list info when changing pages of the listview.
[Code]....
This list can be stored either in a session or a viewstate.
My question is how can i retrieve the information of the list back into my listview and thus displaying the selection the user has made when he jumps from page to page.
Below my listview.
[Code]....
I want to add an item at runtime to my global settings on an ASP.Net web application. It seems that the Properties.Settings.Default.Properties object is read-only, or at least it's Attributes are so I was trying to write directly into the web.config file. This works correctly but the stuff I found was just dropping my info into the AppSettings section, when I need it to be in the ApplicationName.Properties.Settings so it is made available through the Default.Properties object.
The code I have basically goes like this:
Configuration config = WebConfigurationManager.OpenWebConfiguration("/");
config.AppSettings.Add(mySettingName, myValue);
config.Save();
Which is fine and dandy, except that - obviously enough - my setting turns up in the <appSettings> section of the file. Is there a way I can use the Configuration object to access the ApplicationSettings/ApplicationName.Properties.Settings part of the configuration file? If so how? If not is there another way to write values into my application settings from code?
In my project I have a listview which I am binding from code behind. Now I would like to add a droppdownlist for each item in listview. So my question would be:
Is there a way to populate my dropdownlist whit data which I have in a List?
Here is a bit of code to show how my listview looks like:
[Code]....
I have a listview which has a complicated Item template that contains a repeater, an objectdatasource and some other controls. On the first run I am only showing 10 Items of the listview. The user has an option to show 10 more ListView Items. If user clicks on show older items; the listview shall add another 10 items. how to go around this since my list view already has a datasource and I don't want to rebind the whole listview all over again. Instead; I just want to add another 10 items.
View 7 Replieshave an annoying problem. i'm trying to update single items in a databound listview. but when i click the update button it gives me the cannot insert NULL value. it doesnt seem to read anything from the textboxes which i have databound from the database. even though text is clearly shown...
i have setup my update statement and parameters, it uses the Update command name and ItemUpdating event. i catch the data from the textboxes by using e.ItemIndex and use the text assigned to the parameters in a SqlCommand.
The thing i'm aiming for too is that when an item is updated it stays on the page where the item was updated, (i was using response.redirect before but it went against my aim since the whole page reloaded)
Highlight color on duplicate items in listview in vb2005
View 1 Repliesusing asp.net 4 and vs 2010 I have a listview that displays data from a database. I have to configure it to display all column data where present, however, not all columns have data, with the result that blank spaces get rendered where this data would normally be displayed.
The code:
[Code]....
So, for example, some of the individuals that exist in this table might no longer be associated with a specific department, institution or have data in the "Address2" column.
I have a ListView control in Asp.Net WebForms which display a set of elements, I have at the end a "More" button like Facebook for example. During the postback I want to get from database another 10 elements (I have already displayed 10 and I don't want to retrieve them again)
Something like this.
foreach (var item in New10Items)
ListView.Items.Add(index,DataItem)
the problem is with DataItem, how to Bind it before add it? what is the best way of solving this?
I have a listview showing images like ImageViewer and I want to implement Drag-Drop behavior within ListView. how can i achieve the Srag-Drop inside the below kind of customized ListView.
<asp:ListView ID="lvPhotoViewer" runat="server" GroupItemCount="3" InsertItemPosition="LastItem">
<LayoutTemplate>
<table id="groupPlaceholderContainer" runat="server" border="1">
<tr id="groupPlaceholder" runat="server">
</tr>
</table>
</LayoutTemplate>
<ItemTemplate>
<td id="Td4" align="center" style="background-color: #eeeeee;">
<asp:Image runat="server" ID="imPhoto" Height="100px" Width="100px" ImageUrl='<%# "~"+Eval("PhotoUrl") %>' />
<br />
<asp:Label ID="DefaultPhotIDLabel" runat="server" Text='<%# Eval("PhotoName") %>' />
</td>
</ItemTemplate>
<GroupTemplate>
<tr id="itemPlaceholderContainer" runat="server">
<td id="itemPlaceholder" runat="server">
</td>
</tr>
</GroupTemplate>
<InsertItemTemplate>
<td id="Td3" width="150px" height="150px" runat="server" align="center" style="background-color: #e8e8e8;
color: #333333;">
<asp:FileUpload ID="fileUpload" runat="server" />
</td>
</InsertItemTemplate>
</asp:ListView>
Code Behind:
public class ImageEntity
{
public string PhotoName { get; set; }
public int PhotoIndex { get; set; }
public string PhotoURL { get; set; }
}
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
IList<ImageEntity> imagesList = new List<ImageEntity>()
{
new ImageEntity(){ PhotoName="House1", PhotoIndex=1, PhotoURL= @"ImagesHouse-01.JPG" },
new ImageEntity(){ PhotoName="House2", PhotoIndex=2, PhotoURL= @"ImagesHouse-05.JPG" },
new ImageEntity(){ PhotoName="House3", PhotoIndex=3, PhotoURL= @"Imageshouse.jpg" },
new ImageEntity(){ PhotoName="House4", PhotoIndex=4, PhotoURL= @"Imageshouse2.jpg" }
};
lvPhotoViewer.DataSource = imagesList;
lvPhotoViewer.DataBind();
}
}
I am trying to use checkboxes to select the items in a Listview. I have added a checkbox control in the , and they are displayed properly.
The problem is that Checked property never changes when I click on them. Why does this happen?
Here is the code:
<asp:ListView ID="ListView1" runat="server"
onitemcommand="ListView1_ItemCommand"
onitemdatabound="ListView1_ItemDataBound">
<LayoutTemplate>
<asp:PlaceHolder ID="itemPlaceholder" runat="server" />.......