I'm writing a registration form using just CSS styles and while the web page is rendered in the browser the way it should the view at design time is awful.Design time view: ttp://img340.imageshack.us/img340/1746/sshot1op.pngRendered page: http://img140.imageshack.us/img140/4989/sshot2r.pngThis is the code behind (no markup):
[Code]....
Is that something I should normally expect?
getting an error like this:
PostError Creating Control
RadTabStrip1Failed to create designer 'Telerik.Web.UI.RadTabStrip, Telerik.Web.UI, Version=2010.1.415.35, Culture=neutral, PublicKeyToken=121fae78165ba3d4'**
I'm trying to develope a collapsible panel control with designer.
I have the following two classes:
[Code]....
and this one:
[Code]....
In fact, the designer class is a copy of a sample class in MSDN and I only tried to customize it to work for me. I'm not sure if all methods are necessary or not.
I have the following two questions:
1- When I use this contrl in design mode, I can add or delete controls to it, in the html view, tags are not updated. so when I close the page and open it again, all changes are lost.
2- I have added this control to the same asp.net project that is using this control. Isn't there any way to have this controil in tool box?
I am using vb.net to send an html styled table through email but no luck so far. The following is the code I used trying to give the table a border of 1
[Code]....
I have a asp.net web project in which I am trying to view the Default.designer.vb page. I thought there was a button at the top of the Solution Explorer that would allow you to show the "Designer" files but I don't see it. How can I view these files?
View 5 RepliesI'm just getting started in ASP.net and am building a site. I made a change to a style sheet to change the color of the links in my menu control on my master page. It looks great in the designer and is just the way I want it. Although, if I view default.aspx in the browser it is back to how it was before I made the change. Can anyone give me some suggestions on places to look to figure out why it isn't right in the browser?
View 6 RepliesGOOD graphical view designer for MySQL most of them suck. Navicat is the best I could find its great at most things but its view designer is junk.
View 1 RepliesI have an Error in the design view when I use the ajax toolkit. it says rendering Control Accordion - An unhandled exception has occurred. Collection was modified; enumeration operation may not execute. I have the relevant service pack, download ajax toolkit and I have used the appropriate declerations on the top of the page, I hope. I haven't yet even put anything on the page and the designer view shows the above error.
<%@ Page Language="vb" AutoEventWireup="false" MasterPageFile="~/Site.Master" CodeBehind="listaccessoriesbytype.aspx.vb" Inherits="FashionPrototypeProject.listaccessoriesbytype"
title="Untitled Page" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<cc1:Accordion ID="Accordion1" runat="server">
<Panes>
<cc1:AccordionPane ID="ac" runat="server">
<Header></Header>
<Content></Content>
</cc1:AccordionPane>
</Panes>
</cc1:Accordion>
</asp:Content>
I entered this manually in my webconfig: added this under the rest of asssemblies code
<assemblies>
<add assembly="AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
</assemblies>
added under the rest of controls
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
</controls>
when I try to open the view designer in my windows application project I get an error msg - there is no editor available for 'C:documents and setting....Form1.vb' Make sure the application for the file type (.vb) is installed.
View 1 RepliesSo I've been handed an older website, and been asked to make some modifications. It's been made with ASP, and I'm not really familiar with it. [URL] I've been asked to get rid of that awful scrolling. By looking at the page source, I determined that the scrolling is done using some inline Javascript.
<script type="text/javascript">
function getElementPosition(theElement){
var posX = 0;
var posY = 0;
while(theElement != null){
posX += theElement.offsetLeft;
posY += theElement.offsetTop;
theElement = theElement.offsetParent;
}
return {x:posX, y:posY};
}
var offsetY = 0;
window.onload = function(){............................
This is my first silverlight Application. I am trying to use Rating Control from 3.0 Toolkit with VisualStudio 2008 Here are the problems: I am unable to see designer view after adding Rating Control and few other controls. I am not getting any errors or warnings on markup or while compiling. Trying to access Property window for any control is giving me this message " Property Editing not available". Is this the way silverlight was made available with Visual Studio or is there something I am missing here?
View 1 Repliesmaybe it's a dumb question, how can i see the designer generated codebehind files (named .designer.aspx.cs) in VS2010?
i need it to wireup form events when i disable autowireup option at @form.
I have some webforms in an Asp.Net V2.0 generated using Visual Studio 2005 using Web site technology
Want to import them in to Visual Studio 2008 set to v3.5 (Asp.Net MVC) - where I use Project technology
I'm using Add > Existing Item - Which brings in Whatever.aspx & Whatever.aspx.cs There is no Whatever.aspx.designer.cs to import
How do you force it to be generated ?
How do you delete more than one entity at the same time in the designer Entities list. it seems that the designer interface only allows the selection of 1 entity at a time....
View 1 RepliesI have a masterpage with a content area. When viewing a page in the designer the content area is so narrow it blows the page formatting to pieces. When viewed in a browser it looks fine, just looks bad in the designer.
I've seen other projects on other computers that don't have this problem ... is there a setting for this?
I have the following code which adds a label and a gridview to an asp.net page:
GridView grd = CreateGridView(kvp.Key.Text);
Label l = new Label();
l.Text = "some text";
l.CssClass = "this has no effect";
placeHolderResults.Controls.Add(l);
placeHolderResults.Controls.Add(grd);
Two questions really:As the page will have a multiple and unknow quantity of Label + Grid pairs I'm looping through the above code, is this the best way to add the controls to the page?I cannot style the label? How do you do it? Looking at the HTML which is created, the label turns out to be a SPAN.
This is in VS 2008. If I right-click in my code-behind page, I get a very useful "View Designer" option, which is great because it saves having to find the .aspx page in the row of document tabs:Problem is, it always opens in Design Mode, not Source Mode, even though in my options, under HTML Designer, I have "Start pages in" set to "Source View" (though I know that usually applies to double-clicking the file in the project explorer):So is there a way of getting the context menu "View Designer" to always open in Source View?Second question: Is there an option/plug-in/hack to change the way VS manages tabs? Specifically, my gripe is it opens2 tabs for the same page (one for aspx and one for aspx.cs), adding to the mess of tabs, which is crazy. Instead of, say, using the buttons at the bottom... is this possible (a mockup):That would be handy. But View Design context menu opening in Source view would be better, if possible.
View 2 RepliesI am using VS 2005 profesional edition I am creating a webservice asp. net and when i right click in authorsservice.asmx it appears several optiosn but it does not appear "view designer" how can i make this option visible? The fact is that i am following a tutorial in spanish [URL] and It tells me to drag the fields au_id, au_lname, au_fname y city. to the designer surface , but i do not see it and somebody told me to right click in authorsservice.asmx and and pick in hte option view desginer , but i can not find it.
View 1 RepliesI have added new tab for ajax control toolkit ,
I can use for exemple AccordionPane control but there are some controls didn't work when I drag them in the designer view like "Calendar control and many ...." that ' s mean that this control can't be added in the designer
for mor information , I use Visuel studio 2008 and I installed AjaxControlToolkit-Framework3.5-NoSource.
I am using vs2010 and working on an ASP.Net Website my problem is the controls that I add to the designer surface disappear after I save and switch to code view. As shown in 'Fig1'
Fig1
Description: When I am using the designer surface, I will drag on a series of SqlDataSources and configure them. I then either save and close or just switch back to code view, if I switch back to code view the SqlDataSources do not exist but when I swtch back to designer view they are there, if I save and close then re-open the newly added control are not there.
I have been using .NET 2.0 and VS 2005 for web application project and lately i am noticing that .designer.aspx.cs does not declare all the controls 'automatically' which r there on .aspx...i add them manually and some of them get lost,like the additional 'div' controls which i have on pages inheritated from the master,everytime i reload it.. ..i fully understand that i am not suppose to manually change anything in designer.aspx.cs but what do i do with this issue? Is .net 2.0 ,VS 2005 are too obsolate and i absolutely need to get on .net 4.0,2010..
View 5 RepliesShould bar on the HTML designer show the tag name? It sometimes does!
Here's an image of what I referring to.
I thought for sure it must be a bug but considering that I heard that MS was rewriting the editor (designer too?) I am starting to question whether I know how to use it!
Note the "TD" tooltip on the bottom right. Shouldn't this "TD" appear on the bar on the far right where the mouse would be?
I am placing controls in a html table layout. I want to select all the controls in order to make their size uniform in design mode. How to do that?
View 1 RepliesI'm working on building a an ASP.NET composite control that is a wrapper for a GridView object. I have been able to figure out how compose the control in order for the markup to appear correctly when added to an ASPX page. Now the issue I'm having is that when I drop an instance of the control on a form from the toolbox, I can't interact with the control using the functionality exposed by a GridView (e.g. columns editor, data source selector, etc.), and I don't see any design-time rendering of the child GridView control. What I would like to do is to basically forward the designer behavior of my composite control down to its child GridView control. I have experimented with implementing a custom designer class that inherits from GridViewDesigner that simply initializes itself using the GridView child of my composite control. However, this doesn't seem to work, as I encounter an "object reference not set to an instance of object" error at design time; I'm wondering if this is even the appropriate strategy to achieve what I'm looking for. how to enable GridView-like design time behavior in composite controls. I have scoured the Web looking for articles on how this is accomplished, but I've surprisingly found virtually no resources on the topic.
View 6 RepliesIt seems that VS always displays more than 20 rows of ListView in its designer. If a page has quite a few of ListViews, it is a bit hassle to move around. Is there any way to reduce the number of displayed rows?
View 7 Replies