Web Forms :: Marking Specific Pages With A Flag?
Nov 1, 2010
I have a website that has many pages. Half of the pages need to redirect a user to a specific page. The other half DO NOT need to redirect a user. How can I mark a page as needing / not needing redirection without going into each Page_Load and manually writing my code. I was thinking about creating a MasterPage and creating a virtual property called NeedsRedirection and overriding it in the webpages, but I soon realized that the webpages still do not INHERIT from the master page. Any other suggestions as how to mark a page as needing redirection? Can I do this in the markup to make it easy?
View 1 Replies
Similar Messages:
Feb 15, 2010
I want to use the login component with forms authentication, but i don't want to use the whole package. I have a database with users in it, and i create the users manually, through another section of my site. I will authenticate them using my own functions, in the Authenticate event.
But, specifying the forms authentication in web.config, i seem to recall having seen somewhere, that i could add pages that were protected, while the rest of the site wasn't.
How do i do this? Currently, i have only 1 page that i want to protect.
View 2 Replies
Feb 22, 2010
This seems like it should be easy..... I am pulling some results from a database and then comparing them to a checkboxlist ... if a checkbox item within a list of checkboxes is within this result list, then I want to check that box...this is an 'easy' version of what I am trying to do...
[Code]....
View 1 Replies
Dec 29, 2010
I have a "date" column in a grid view and I want that each time the date is older than today, the whole row will be mark in yellow or some color.I have a function that does that by using "find control" but, since this column is a template column- when I use edit/cancel command the control turns from label to textbox and the function can't identify the "new" control..(I wanted to add code but from some reason it's not working
View 7 Replies
Dec 6, 2010
How to extract specific pages in pdf using itextsharp?Suppose i have 16 pages of pdf i want to extract page number 2,8,16 from that 16pages.
View 1 Replies
Mar 24, 2010
I'm no programmer. I am a student majoring in Business Information Systems. My capstone course requires me to develop a web-enabled database that will allow a company to track their projects. I have set it up this far using the 3.5 dynamic data page. My database is fine, however I need to set it up so that Admins can view the entire site and have the ability to edit, view, and delete items, and where users can only edit projects that they are assigned. Is what I'm looking to do possible?
View 4 Replies
Nov 24, 2010
I want to know if there is way to change meta description on specific pages, but to keep the meta data from the master page for the pages where I haven't specified any info.
I am trying this approach:
[code]....
Which adds the description tag properly, but I want in same time to remove/disable the meta tag from the master page. Is that possible?
View 1 Replies
Mar 12, 2010
I have a site that features some pages which do not require any post-back functionality. They simply display static HTML and don't even have any associated code. However, since the Master Page has a <form runat="server"> tag which wraps all ContentPlaceHolders, the resulting HTML always contains the ViewState field, i.e:
<input
type="hidden"
id="__VIEWSTATE"
value="/wEPDwUKMjEwNDQyMTMxM2Rk0XhpfvawD3g+fsmZqmeRoPnb9kI="
/>
EDIT: I tried both variants of setting EnableViewState on page level with no luck at all:
<%@ Page Language="C#" EnableViewState="false" %>
<%@ Page Language="C#" EnableViewState="true" %>
I realize, that when decrypted, this value of the input field corresponds to the <form> tag which I cannot remove because it is on my master page. However, I would still like to remove the ViewState field for pages that only display static HTML. Is it possible?
View 6 Replies
Nov 6, 2010
The Copy Web Site tool shows both the local and remote versions of most of my files as "New" But I know they are the same because I recently copied them. I would like to do something to mark them as "Unchanged" without recopying them and thereby changing the creation timestamps. Are any of the following possible?:
A tool that compares files and marks identical files as synchronized. Explicitly telling VWDE to mark files as synchronized. Going around the user interface to mark files as synchronized. How does VWDE keep track of which files are synchronized?(In case you are interested, the way things got in this state was that I copied the files with the remote site as local and the local site as remote. I did it that way because I had been editing files directly to the remote site.)
View 1 Replies
Mar 12, 2010
I'm currently using ASP.NET MVC 2 and the spark view engine. The main master page (application.spark) contains all of the CSS link tags that need to be present for all pages (global stuff). However, I have some content pages that have page specific CSS tags and currently I'm just sticking the link tag in the body as something like:
<content name="MainContent">
<!-- page specific csss -->
<link rel="stylesheet" href="/Content/css/page_specific.css" />
My problem is that when the page renders, this tag ends up in the which is not where it needs to be. Is there a solution for this?
I had was to check the controller in the Application.spark page and write out which page specific css file is required for that particular controller, however, that solution doesn't seem to scale well and I would imagine there is some way of creating the link in the child page and having it render where it's supposed to by the browser.
View 1 Replies
Apr 7, 2010
I have a dll written in VS 2008 that needs to act like an ActiveX control called via JavaScript from a HTML page and writes a file to the users local machine.
The main code is like the following:
[Code]....
The control works if I turn off a lot of security in IE and manually run regasm on the users machine, but how do I automate the process and let it run without the users having to lower their security levels?
Do I need to get the dll signed? If so how do I get it signed and how do I deploy and install it to users?
View 2 Replies
Apr 22, 2010
I have to create user control which will have list of languages and contry flag to implement this i have used DropBox control but i could not able to add flag in dropbox control along with langauge name.
View 4 Replies
Jun 8, 2010
I have a simple Treeview based on my SiteMap with Security Trimming turned on.
Rather than defining a fixed ExpandedDepth in the Treeview, is it possible to add a property to the SiteMap that indicates which nodes should be expanded?
View 3 Replies
Jul 30, 2010
I use the code below to submit and display comments from visitors to my website, what I need now is a way to check the comment submitted before it is displayed in the Datagrid Control. Please how do I do this?
protected void Page_Load(object sender, EventArgs e)
{
DateTime textDate = new DateTime();
[code]...
View 2 Replies
Mar 22, 2010
I got this security warning ReviewVisibleEventHandlers(CA2109)for all event handler methods that are present in Global.asax.cs file(Application_Start,Session_Start,Application_BeginRequest,Application_EndRequest,Application_AuthenticateRequest,Application_Error,Session_End,Application_End.
I am trying to fix this warning by marking all event handler methods that are present in Global.asax.cs file as private. Does it result in any side effects in web application execution?
View 2 Replies
Oct 9, 2010
I was wondering is there anyway to create a flag column similar to outlook or is there any 3rd party control out there that already has this feature built in?
View 1 Replies
Jun 7, 2010
I have function named (display)
I need to call this function (display) avery two second
View 4 Replies
Nov 9, 2010
I am having a problem with setting a flag on sucessful completion of a record in a stored proc. I am using following code. stored proc: Update where condition.
if @@RowCount=1
update table
set ItemReviewed=1
where condition.....
select @Count=@@rowcount
here the problem is i do have 2 update statments in a single proc..if one is sucessful then its setting if others failed...I want to check both are sucessful. @count will return the bool to my code where i can move on to the next record. if some testing @@rowcount is not feasible one to use...Itemreviewed is bit field.
View 15 Replies
Jan 17, 2010
I have a button on my gridview that makes visible another gridview nested inside a column. What I want to do is to use the same button to hide it again. I can already make visible my nested gridview, and I know to hide the gridview itself would be the same code again. The problem I have is setting my flag in order to control which branch of my if statement is executed. I tried writing this inside the button event bool flag = false; and then changed it to ture after the gridview is shown, but of course it re sets itself to false again, and the else bit is never reach when you press the button again.
Is there away where I can persist a flag that when the button is pressed one branch of the if statement is reached, and when it is pressed again, the next branch is run? I do want to use JavaScript because the page is already overloaded with it!! I am using a template field with a button set inside it, and thus I wish to use code behind posting back to the server
View 2 Replies
Jan 4, 2011
public int InsertCompanyDetailsInformation(int companyId, int bankId, int accountNo, string accountType)
{
int rowsAffected = -1;
int returnValue;
try
{
SqlConnection con = DBProvider.GetDbConnection();
using (con)
{
con.Open();
SqlCommand objCmd = new SqlCommand("dbo.sp_InsertCompanyDetailsInformation", con);
objCmd.CommandType = CommandType.StoredProcedure;
objCmd.Parameters.AddWithValue("@companyId", companyId);
objCmd.Parameters.AddWithValue("@bankId", bankId);
objCmd.Parameters.AddWithValue("@accountNo", accountNo);
objCmd.Parameters.AddWithValue("@accountType", accountType);
rowsAffected = objCmd.ExecuteNonQuery();
SqlParameter sqlParam = objCmd.Parameters.Add("@insert_flag", SqlDbType.Int);
objCmd.Parameters["@insert_flag"].Direction = ParameterDirection.ReturnValue;
returnValue = int.Parse(objCmd.Parameters["@insert_flag"].Value.ToString());
con.Close();
}
}
catch (Exception ex)
{
throw ex;
}
return rowsAffected;
}
and stored procedure
USE [SGTime_Development]
GO
/****** Object: StoredProcedure [dbo].[sp_InsertCompanyDetailsInformation] Script Date: 01/04/2011 14:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_InsertCompanyDetailsInformation]
(
@companyId int,
@bankId int,
@accountNo int,
@accountType varchar(50))
AS
BEGIN
SET NOCOUNT ON;
declare @insert_flag int;
if not exists(select AccountNo from [Company_Account_Details] where
AccountNo=@accountNo)
begin
INSERT INTO [Company_Account_Details]
( Company_Id,
BankID,
AccountNo,
AccountType)
values
(@companyId,
@bankId,
@accountNo,
@accountType)
set @insert_flag=1;
END
else
begin
set @insert_flag=-1;
end
return @insert_flag;
end
I am getting error in the code i want return returnValue in InsertCompanyDetailsInformation. how we can return returnValue
View 4 Replies
Sep 1, 2010
I've just began "using" AJAXTC, and since early this morning, I just can't manage to make something.
I followed every dummy tutorials, created a new asp.net website, (I'm in 3.5 fw), added an uodatepanel with all properties right, added references to AjaxControlToolkit.dll, added a ScriptManager, added a ToolkitScriptManager, and even, I still can't get this arrow flag for adding extenders to a Textbox appearing...
I checked, I'm using AJAXToolkit 3.5,
View 3 Replies
Apr 30, 2010
I have a frame with several radio buttons where the user is supposed to select the "Category" that his Occupation falls into and then unconditionally also specify his occupation.If the user selects "Retired", the requirement is to prefill "Retired" in the "Specify Occupation" text box and to disable it to prevent it from being changed. The Specify Occupation text box should also no longer be a tab stop. If the user selects a radio button other than Retired the Specify Occupation text box should be enabled and once again and the Specify Occupation text box should once again be in the normal tab sequence.
Originally, I was setting and clearing the disabled property on the Specify occupation textbox, then I found out that, upon submitting the form, disabled fields are excluded from the submit and the REQUIRED validator on the Specify Occupation textbox was being raised because the textbox was being blanked out.What is the best way to solve this? My approach below was to mimic a disabled text box by setting/resetting the readonly attribute on the text box and changing the background color to make it appear disabled. (I suppose I should be changing the forecolor instead of teh background color). Nevertheless, my code to make the textbox readonly and to reset it doesn't appear to be working.
function OccupationOnClick(sender) {
debugger;
var optOccupationRetired = document.getElementById("<%= optOccupationRetired.ClientId %>");
[code]...
View 2 Replies
May 5, 2010
How do we determine which country I'm.Let's say I created the application and i want to have a flag in upper right of the page.if the user browse my page it display the flag where he from.let's say he's browsing my page in america the American Flag will be displayed.if i browse my page here in the Philippines the Philippine Flag will be displayed.
View 6 Replies
Apr 3, 2010
In My project I have DoupDownList(ddl). In my ddl in need to bind country names along With Country Flag..So Can Any One Help Me In thi issue...Country Name And Country Flag Bouth i need to Bind in my ddl
View 5 Replies
May 20, 2010
I have never created my own solution before now. I have always modified existing solutions and know how to do it. For some reason, this new solution isn't connecting to my SQL server correctly.
I am using VWD 2008 Express Edition.
I have MSSQL 2008 Developer Edition.
I have used aspnet_regsql.exe to create the tables in my SQL DB.
I have added the following to my webconfig:
[Code]....
But for some reason, when I try to use the Web Site Administration Tool it thinks it is not setup.
What am I missing?
View 1 Replies
