Web Forms :: Nested User Controls - Error Handling
Jun 25, 2010
I've got a .aspx page which loads a user control using the LoadControl(string virtualPath) method. The loaded control contains references to several other user controls (i will call "modules"). If such a module contains an unhandled coding error which isn't catched at compile time (e.g. division by zero), no helpful error is thrown. The .aspx page just gets an error from the LoadControl method that the control to load cannot be found (404), but in fact it contains a faulty module.
Is it possible to get the error of the module from within the .aspx page for better troubleshooting? Can I get information about, that (in this example) there is a division by zero error in module (nested user control) xy?
View 6 Replies
Similar Messages:
Mar 31, 2011
I have a Datagrid inside a Datagrid and I am trying to perform an action (open an pop-up window with related values in the querystring) when the inner datagrid control is clicked.In this simplified example I have 2 datagrids (datagrid1 and
datagrid2). In the second datagrid (datagrid2) I have a LinkButton (lbViewDetails) that I want to control what it does based on the value in the upper datagrid (datagrid1)'s lblRecordId value.
View 4 Replies
Mar 4, 2010
I am trying to catch an event that is in a user control inside a master page contentholder and refresh the content page. I am having a hard time finding a good example. Even on this site I am timing out on search.
View 3 Replies
Jun 4, 2010
I have a user control called ucTriStateButton. It raises an event when it is clicked, called TriStateButtonClicked. If I put this user control on a page, it works fine. Here is the declaration on the .aspx page:
[Code]....
When the button is clicked the method tsbTest_TriStateButtonClicked executes correctly.
The problem is when I put the user control in template field of a GridView.
[Code]....
There is no way to hook the event handler to the control in Page_Load because I cannot get a reference to tsbMorning. So I did it in the RowDataBound event handler of the GridView, where I also do a bunch of other row-specific stuff. Although this builds and runs, the event is never actually subscribed to and so never gets fired.
So the question is - how can I handle an event from many instances of the same user control within a GridView? I am calling the same bit of code regardless of which user control is actually clicked. I only need to know that one was clicked.
View 3 Replies
Jul 6, 2010
I've got a basic web form page which I use 2 user controls on. The first control has the second nested within it...
On my first popup.ascx i have the following javascript validation
[Code]....
txtDate works fine so is there some issue with having nested user controls and using getElementById I'm missing?
View 2 Replies
Jul 3, 2010
I have created a gridview (this is a usercontrol) with another gridview (also a usercontrol) inside it. Now I would like to bind a checkboxlist to the inner gridview. This is my markup for the inner gridview user control
<asp:GridView AutoGenerateColumns="False" GridLines ="None" Width ="100%"
View 5 Replies
Jun 11, 2010
I have quite a number of user controls that I need to embed in Umbraco macros. Each user control has quite a bit of in page javascript that needs loaded into the page.
I have been building up the javascript with StringBuilder.Appendline then registering a startup script with code behind but this stinks and I feel there has to be a better way of going about this.
View 1 Replies
Jun 17, 2010
Is there a better, cleaner way to do this in ASP.NET 2.0?
An ASP.NET 2.0 page displays a datalist of records. Each record can have many dates, so the dates are in a nested gridview (I chose a gridview over a datalist here because we want to be able to delete a date and this is easier done in a gridview). The parent record can never be deleted.
The display works fine: the nested gridview gets its datasource during the parent datalist's OnItemDataBound event.
The problem: the nested gridview's delete function. The date gets deleted without a problem (handled in the OnRowDeleting event), but somehow the redisplay is untying all the other nested gridviews from their datasources. The delete does not appear to cause a page postback, so I don't know how the other nested gridviews are losing their datasources.
View 3 Replies
Nov 14, 2010
When a server error occurs for whatever reasons (YSOD), the server will send a message via SMTP class. In my case, my company employs microsoft exchange and uses NTLM authentication for all domain users. I am authenticating users via NTLA windows integrated authentication. My question is, is it possible to utilize this authentication data, and pass it to the system.web SMTP username/password authentication scheme to send an email to me (the web developer) when the error occurs? I am pretty sure my company requires a username/pwd to send emails via SMPT on the ms exchange server.
View 1 Replies
Apr 28, 2010
I have a nested GridView with id grd_inner. i have to find a linkbutton in template field of grd_inner and add some attributes to it. but its giving me error.
[code]....
This code is giving me error that
grd_inner doesnot exists in the current context.
View 5 Replies
Feb 28, 2011
In my code behind I can use try/catch blocks to deal with database errors. How can I capture and handle database errors when using a datasource with a dataenabled control? For themost part I'm using ListView and EntityDataSource controls.
View 7 Replies
Apr 11, 2010
I have a form that contains a number of user controls (partial views, as in System.Web.Mvc.ViewUserControl), each with their own view models, and some of those user controls have nested user controls within them. I intended to reuse these user controls so I built up the form using a hierarchy in this way and pass the form a parent view model that contains all the user controls' view models within it.For example:
Parent Page (with form and ParentViewModel)
-->ChildControl1 (uses ViewModel1 which is passed from ParentViewModel.ViewModel1 property)
-->ChildControl2 (uses ViewModel2 which is passed from ParentViewModel.ViewModel2 property)
-->ChildControl3 (uses ViewModel3 which is passed from ViewModel2.ViewModel3 property)
My question is how do I retrieve the view data when the form is submitted? It seems the view data cannot bind to the ParentViewModel:public string Save(ParentViewModel viewData)...
as viewData.ViewModel1 and viewData.ViewModel2 are always null. Is there a way I can perform a custom binding?
Ultimately I need the form to be able to cope with a dynamic number of user controls and perform an asynchronous submission without postback. I'll cross those bridges when I come to them but I mention it now so any answer won't preclude this functionality.
View 1 Replies
Jul 27, 2010
I am using a masterpage. On a accounts page I have a Usercontrol on this UserControl I have one more user control. If Account is closed I want to Disable all the controls on Accounts page ( including parent and child userControl - controls collection).
View 1 Replies
Apr 20, 2010
I want to save widths of all my gridview columns in cookies on unloading the page.
how to handle page unload event from a user control, as my gridview is in a user control?
View 7 Replies
Nov 24, 2010
I have what is probably a basic question, but I am rather new to writing exception handling code. I thought I understood the concept, but apparently I don't, heres the code:
[Code]....
If I enter in any non-integer values, the textbox is set to nothing and the label displays the error message. However, now that I have verified the textbox contains an integer, I want to continue on and use that value. The remaining code works fine unless there was an exception, in which case the conversion to an int value for x throws an error.
All the examples I have looked at demos the structure of try-catch-finally, but in this instance I am not performing any clean up, I want to execute code when a valid value is entered into the textbox.
View 5 Replies
Feb 24, 2010
In my app i have a master page that all content pages use. I would like to have a centralized area inside my master page that would handle displaying of error messages. So on my master page I would have the following this is where the content goes So when I would submit a content page, placeholder named "ErrorPlaceHolder" would be found and error would be displayed in the pages "Pre Render" event..I guess. How would I do that?
View 2 Replies
Jul 29, 2010
I have a custom ascx user control on my page that includes a dropdownlist. There is an onSelectedIndexChanged event handler that is connected to this dropdownlist. The first time the user selects a value, the page does a postback and the logic executes correctly. However, if the user then goes to change their selection, the event handler does not get triggered.
View 3 Replies
Sep 10, 2010
I've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?
View 5 Replies
Aug 19, 2010
On my master page , I have "Search textbox" and "Search Button".
On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.
Also, on this User Control's Page Load, i have code written to display all vendors in GridView.
Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.
How to do this ?
View 2 Replies
Mar 1, 2011
I'm trying to create a nested gridview, but I'm stuck at the editing/deleting part of the nested gridview. (Below is my code).The nested gridviews are filling out nice, I've set the DeleteParameter in the SQLDataSource, but I'm still getting this error when trying to delete a criteria: 'The Gridview 'gvCriteria' fired event RowDeleting which wasn't handled.'I've tried to create a method 'gvCriteria_RowDeleting', but that didn't seem to work out.Someone who can give me a piece of advice? Would it be possible to fill the gridview without using gvDomain_rowDataBound? Dries
[Code]....
[Code]....
And the C# behind:
[Code]....
View 10 Replies
Jan 26, 2011
I am getting error on attempted Databind call to DataList1 with nested SqlDataSource tool after attempting to update or delete a record.
The SqlDataSource control 'sqldsfilelist' does not have a naming container. Ensure that the control is added to the page before calling DataBind.
Here is the aspx page code.
[Code]....
And the code behind....
[Code]....
View 1 Replies
Oct 1, 2010
I just created a small site with form authentication with route handling. Without forms authentication, the pages route just fine. With forms, it returns back to the login page as it is not one of my allowed locations specified in my web.config file.
I know I probably need to write a custom route handler. Does anyone have an example I can follow for this?
View 1 Replies
Feb 22, 2011
Objective:
Have the MultiView1 display only if Frieght values exceed 15.50. If check box is checked, retreive the row values of the Gridview1 and Gridview2 to perform a task.There will be two check boxes. One will be conditionally hidden. Each check box has a different function.
Example: Send an email notifying this entry has been flagged. I am using Visual Studio 2005 with ASP.NET 2 due to availability of resource. I have checked out numerous sites without finding the specific answer.
For example:
[URL]
The following a simplified representative example of what I am trying to accoumplish. It uses the Northwind.mdb access database with just the Customers and Orders table.
[Code]....
[Code]....
[Code]....
View 8 Replies
Jul 29, 2010
I've been reading around the web about different alternatives to keeping track of users but I can't seem to find the "perfect" solution for my situation.
The app will (hopefully) be high-volume so I'd like to design with scalability in mind. It might be necessary to host the site using several web-servers so session mode InProc won't work, right? It's kept in memory of the current web-server and since the user might jump from web-server to web-server I can't be sure the session will be kept connected to the user.
Do I need to make a custom membership and role provider that works with mySQL to be able to use the .NETs standard user handling systems (like FormsAuthentication that can handle session stuff from what I've understood)?
View 1 Replies
Jun 2, 2010
I have all my errors handling up and going but now I wish to change the error messages that they display for empty integers.I have been going through my codes but I can't to change that. For now, the error message for all numeric values are "A values is required" and I wish to change it to "<TextBoxName> cannot be empty".
View 10 Replies
