In my attempt to handle referrals, I thought it would be nice to pre-populate the username/email since I know it from the referral record. I use email as username.It appears to work, i.e. the email address is already in the textbox field, however, it always fails with Invalid EmaiIf I erase it and type the same email, it works.In page load I do the following:
[Code]....
Can someone lead me to understanding when to set the encoding for the email step when sending new member emails. For instance what is the default or how can I tell what it is or if I want to set it in the SendMail event in code. See the thing I am wondering is when is it applied? If I set the MailDefinition-From in the html part then in code using the SendMail event set the encoding using
e.Message.From = new
MailAddress("foo@bar.com","foo",System.Text.Encoding.UTF8);
then I assume that it must actually get applied when the email is sent. Is that correct?
I tried to add a loginview to this code:
[Code]....
I tried adding LoggedIn/AnonymousTemplates etc but it chucked up loads of errors, when I ran the application. The weird bit is, the errors didn't show up in the VB error section!Effectively what I'm trying to do is add <AnonymousTemplate> to the register bit and a <LoggedInTemplate> to a message saying "Your already Registered!"
I have a CreateUserWizard where there are two plain WizardSteps, then the CreateUserWizardStep, then CompleteWizardStep. In the CreateUserWizardStep I would like to use a reCAPTCHA control. Obviously when I go to the first plain WizardStep the reCAPTCHA control is invalid. So when I click the Next button from the first WizardStep the form isn't valid and I can't progress. I'm not sure how to handle this situation.
Custom navigation template somewhere maybe?
I'm hoping to discover how to add an email validation step to the CreateUserWizard. I've seen many sites where I create my membership, and then I receive an email at the address I gave, which holds an encoded link back to the website. It allows the website to confirm the email is working. I'd like to add this. I've found out how to use the maildefinitionbodyfile with user generated items, but can't find this function to require a reply by email. Could someone give an overview of what's involved (if it's complicated), or point out how to do it (if it is a built in function I'm not aware of). If there was a code sample somewhere, that would be the best possible outcome...
View 5 RepliesI've been trying unsuccessfully to reference the Create User Button in CreateUserWizard. I need to verify if the username is valid for access before they sign in.
When I click on then create user button it doesn't seem to reference the "onnextClick" event.
Here's the code behind:
Protected Sub CreateUserWizard1_NextButtonClick(ByVal
sender As
Object,
ByVal e
As System.Web.UI.WebControls.WizardNavigationEventArgs)
[Code]...
<asp:Content ID="Content3" ContentPlaceHolderID="ContentPlaceHolder2" Runat="Server">
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server" BackColor="#FFFBD6"
BorderColor="#FFDFAD" BorderStyle="Solid" BorderWidth="1px"
Font-Names="Verdana" Font-Size="0.8em" oncreateduser="CreateUserWizard1_CreatedUser" Width="391px"> <SideBarStyle BackColor="#5D7B9D" Font-Size="0.9em" VerticalAlign="Top" BorderWidth="0px" />
[Code] ....
The problem is even if the validation in createuserwizard are not satisfied the user login details are created...
I want to prevent the copy and paste of passwword to confirmpassword. I have tried to prevent this action with the Javascript below but I continue to get the error "The Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).".
The jvascript I am using is as follows:
$(document).ready(function () {
var PasswordClientID = = document.getElementById('<%= CType(CreateUserWizardStep1.ContentTemplateContainer.FindControl("Password"), TextBox ).ClientID %>');
$(PasswordClientID).bind('copy', function (e) {
e.preventDefault();
});
var ConfirmPasswordClientID = = document.getElementById('<%= CType(CreateUserWizardStep1.ContentTemplateContainer.FindControl("ConfirmPassword"), TextBox ).ClientID %>');
$(ConfirmPasswordClientID).bind('copy', function (e) {
e.preventDefault();
});
});
I need to create a server control with the CreateUserWizard, so this CreateUserWizard use the current projects database and the current web.config to get the "MailDefinition" section so it can send emails with the current web project's settings...I cannot add ASCX page to a server control....
View 3 RepliesI am developing a project in ASP.Net and C#. As per its requirement I have used CreateUserWizard control in FormView's InsertItem template to register a School just like a user registration to get rid of writing the code manually to register a schnool.
well, in CreateUserWizard control there is not any textbox control named username in its content Template because I have no need of this.
when I run this page I get following error.....
[Code]....
how to fix this?
I dont want, indeed I dont need, the username text field that's why I have removed this.
I have customized this control as per my requirements hence few default fields have been removed like username textbox field, therefore it may result more errors when I fix first one.
I have a CreateUserWizard control on a form TextBox and I want to addmobile content CreateUserWizard information stored in the text box can saveanother table The problem is that the TextBox can not get a name when I added in the formCreateUserWizard
View 1 RepliesI am getting a problem while working with the Dropdownlist in VS2008. I am trying to populate the DDL using c# codding instead of creating DataSource in GUI. The DDL is getting populated as expected, but then I've added a label that will show the current selected item; for this I've written a code in DropDownList1_SelectedIndexChanged() :
Label1.Text = DropDownList1.SelectedValue.ToString();
I hae also enable AutoPostback for the DDL.
I have placed the PopulateDDL() method inside of the Page_Load();
But whenever I select a item, it's always giving only the first item's name as the Lebel.Text.
But when I use GUI and ceate a SqlDataSource and attach that to the DDL all works fine.
What to do??
Is there a property i can call to set the maximum length for the username or password field in a CreateUserWizard Control to limit the numebr of characters entered in the field? If so, how can this be done?
View 2 RepliesI'm using the following code to pick up the UserID of newly created users in a page containing a CreateUserWizard. Should work because it's at the end of the _CreatedUser event, but the UserName comes up Nothing. Anyone know what the problem might be? I know the user is being created because the "success" message is displayed and it writes to the database.
View 4 RepliesNow to my question. I would like to check for username availability. For this I need to extract the text entered in the UserName textbox from the CreateUserWizard. I don't know how to do so. I need to cast somewhere but where?
Here's my code: (the bold word draws a cast error which I need to sort out)
[Code]....
referencing a control inside the createuserWizard template of the createuserStep
I tried like this:
Dim lastn As TextBox = CType(CreateUserWizard1.FindControl("LastNameTxt"), TextBox)
and like that:
[code]....
Is it possible to setup the CreateUserWizard to check for a duplicate entry in the aspnet_profile table (for a custom field) before the new user is created? For example, if I added a phone number field and wanted to make sure nobody else could create an account using that same phone number if a user already has an account with that phone number in the aspnet_Profile table's PropertyValuesString row?
View 10 RepliesI am creating an application for that I am creating login page so I am using CreateUserWizard control.
View 1 RepliesHow to Approve New Users with Confirmation Email Using CreateUserWizard Control in ASP.Net.
View 1 Repliescustom self populating listbox
[Code]....
I am populating a data bound control DropDownList with file names from a local folder that resides within a ListView control.
I am able to populate as expected, in testing list is generated - all good in that regard.
However once I set to databind by adding SelectedValue='<%# Bind("ImageFile") %>'the following error occurs
ERROR:Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
This is the aspx file .. no codebehind:
#CODE SNIP #
[Code]....
I'm really struggling with this tonight (this being exactly what it says on the tin, (or the subject!)).
Code I'm working with right now is:
[Code]....
I have just built a contact form for a website and it works fine but now I would like the "Subject" textbox to be filled if the user has been redirected to the contact.aspx page from another link.
For example if the user just clicks on the contact us link then the form will be blank but I have some items on the website where there is a link that says "Enquire..." that redirects to the contact.aspx page but I would like the subject textbox to be filled in with the item that it was redirected from?
I am just trying to figure out a way to populate a textbox based on the results of two ddls. I have one table that stores the whole data...So an example would be
DDL1 - State
DDL2- City
Textbox(Comments) - "Sometimes the comments would already be on the table...so i will like to populate the ones already in there based on the two ddl's
I'm currently building my website and have hit a brick wall. I've not begun coding anything fro this yet as I am unable to get my head around it and not sure where to start.
I've got a database table with a list of town/ county names ( columns are id, town, county).
What I'd like to do is have a template page with set places for town/ county names and then when a particular area is searched for in google/ bing etc my template page with the relevant town/ county name is shown.
I know that's a bit vague so if you have any questions, let me know. One thing I don't want to do is manually create a page for each individual town/ county!