Handle Click Event For LinkButton In User Control From Parent Page?
Jul 20, 2010
I have a LinkButton within a User Control and it has handled with:
Private Sub LoginLinkLinkButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles LoginLinkLinkButton.Click
Response.Redirect("/", True)
End Sub
On certain ASPX pages I would like to handle the click from the page's code behind, opposed to within the user control. How do I override the handle within the control from the parent's code behind page?
Update:
Based on the answer, I have the following no added to the User Control:
[code]....
The problem is determining the correct syntax for the if line because the above is invalid.
View 1 Replies
Similar Messages:
Feb 27, 2011
I have a user control that is dynamically added to a placeholder control inside an update panel in my main page. The user control has a linkbutton where I try to handle its Command event. The first time the link button is clicked after the user control loads, the form posts back but the command event handler does not execute, although the user control is still on the screen. The second and subsequent times the link button is clicked it works perfectly. When the user control first loads and I mouse over the link button, the browser status bar says: javascript: __doPostBack('ctl08$lbTest',''). After the first click, when I mouseover the link button the browser status bar shows javascript:__doPostBack('ctl07$lbTest',''). Why the changed in id, I can't figure but it must be why it is not hitting the event handler the first time it's clicked. Here is the cs code that loads the user control:
[Code]....
View 2 Replies
Feb 4, 2011
Can i bind and call the user control directly on click event of link button? instead of binding user control in another aspx page and then call it to the masterpage's link button click?
or else can i bind user control in a page lets say default.aspx and then call it in two different master page and show different functionality of it according to the masterpage its getting shown?
View 1 Replies
Jul 31, 2010
I have a blank user control (child) and during Page_Load i create some text boxes and a button. I also add an event to the button.
I then load that user control dynamically from a placeholder in another usercontrol (parent). Both controls are rendered correctly but when i click on the button, the event isnt fired. how to handle the event?
Child code:
[code].....
If i use the child control directy (ie without the parent the control) the click event is raised and handled nicely. But when i use the parent control, the debugger wont even hit a breakpoint inside UpdateButton_Click().
View 1 Replies
Nov 15, 2010
how to handle click event of linkbutton in gridview in asp.net
View 2 Replies
Mar 22, 2011
i would like to ask about how can i open user control page when i click a button on parent page, also, can i call parent's method from user control page and then refresh parent page?
View 8 Replies
Apr 24, 2010
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
View 7 Replies
May 13, 2010
I have a 2 part question for web user controls: 1. I want to have an event fire in my user control, but have it be consumed by the parent page, like:
<asp1:Object id="objectMain" runat="server" OnClick="Click" />
Is it possible to do this? Or do I need to make a server control for this functionality? I have it being able to be set in the Page_Init, but I'd like to make it as similar to actual controls as possible. Also, if it is possible to access via the Events section under Properties, that would be good and 2. I am trying to register the web user control as an AsyncPostbackTrigger for another UpdatePanel. With the previous question in mind, is it also possible to set this via the GUI, or does this need to be set programmatically as well?
View 1 Replies
Mar 4, 2010
I have an EDIT.ASPX page and on that page I have some labels and textboxes and a user control. I listed all the related codes you can have a clear picture - not all of the codes are given me a problem. ONLY ONE.
HELP ---> On the Uer control (SiteTemplate2.ascx) I have a DataList that is being populated by the database and that works fine. I have a
CHECKBOX on the user control page each time the user check the CHECKBOX the user control content totally disappears from the EDIT.ASPX page. There is no error message -- I believe this is a post back error but I don't know how to fix it.
Goal: Each time the checkbox called (CHKBSideBar) is clicked on the user control page all of the page content should stay in place that include
EDIT.ASPX Page and the refeneced USER CONTROL. I should be implement a CheckedChanged Function without either of the pages lossing DATA. I need to be able to access post back event from the user control of the Edit.aspx page. When the user click a box on the user control page how do I keep the same Page_Load event on the edit page. I need to reference the Edit page from the user control.
Note: The edit page loads the user control (SiteTemplate2.ascx)SEE CODES BELOW
I know this is a lot and thank you in advanced for your help. I tried to include all the pages that are key players. I must user the user control bacuase the user can select different template so eliminating the user control is not an option.
'*******************************************************************
The user control is being referenced from the web.config file ** Works find! **
[Code]....
EDIT.ASPX Page **-- WORKS FINE!** [Code]....
View 13 Replies
Nov 26, 2010
In my user control I have gridview, and this grid is created programmatically, using Itemplate. In InstantiateIn methods I have this code.
Select Case _templateType
Case ListItemType.Header
Dim linkButton As New LinkButton [code]....
I want to wired up Click event to this LinkButton, and use this event in code behind.This is constructor of GridViewTemplate how implements ITemplate
Public Sub New(ByVal type As ListItemType, ByVal colname As String, Optional ByVal infoType As String = "")
'Stores the template type.
_templateType = type
'Stores the column na [code]....
and i have this call from user control:bfield.ItemTemplate = New GridViewTemplate(ListItemType.Item, dt.Columns(col).ColumnName, "label")
where is Dim bfield As TemplateField = New TemplateField()
View 2 Replies
Feb 28, 2011
I've created a custom control in ASP.NET for showing a pop-up message box. In my MessageBox class, I have a Content property as ITemplate like the following:
[PersistenceMode(PersistenceMode.InnerProperty)]
[TemplateContainer(typeof(MessageBoxContent))]
[TemplateInstance(TemplateInstance.Single)]
public ITemplate Content { get; set; }
I used my custom control in my page like this:
<cc1:MessageBox ID="MessageBox1" runat="server">
<Content>
<asp:Button Text="Save" runat="server" ID="B_Save" />
</Content>
</cc1:MessageBox>
Even I set the the Content property's TemplateInstance to Single, I still can't have access to the Button control.
All I want to do is to handle the click event of the button. When I assign an event handler to the button control and run the project, it throws a NullReferenceException.
View 1 Replies
Feb 1, 2010
I have created a master page for website layout in my project. I have used a linkbutton control to trigger between Login/Logout functionality but when I click on this control the underlying click event handler is not being executed anyway.When I click on this control, the page pointed by its PostBackUrl property is open which should probably occure after its click event hander have been executed.
[Code]....
and the LinkButton Control is
[Code]....
View 3 Replies
May 18, 2010
I have a LinkButton click event in asp.net 3.5 that I must assess whether a value exists and return a alert.
I have no idea how you can do. I think we need to Ajax
View 2 Replies
Feb 4, 2011
I have created a very simple calendar user control that contains a public property which is used to define which month/year to display. My calendar control is placed inside another ascx control (the wrapper control essentially), which includes LinkButton controls used to toggle the calendar control forward and backward one month at a time.
If I explicitly define the SelectedDateTime property of the calendar control in the wrapper control at design time, the proper month/year are displayed by the calendar control. However, when I try to set the property value at run time using a Click event on the previous and next LinkButton controls, the calendar control never picks up the new SelectedDateTime value I try to assign to it.
When I run the code in debug mode, the Click event of the LinkButton always happens last - after the value of the SelectedDateTime property of the calendar control has already been set to default and rendered. What am I missing?
The calendar control is placed in the wrapper control just like any old control:
[code]....
View 1 Replies
Oct 9, 2010
In a page , when I click a button 'showDialog' I am loading the user control dynamically in a dialog. I am linking to the event in the user control as explained below. The parent page is not receiving this event.
Button_Click(){
UseControl1 gc = dlg.LoadContent(:UserControl1.csx);
gc.CausePostback += new EventHandler(execute_CausePostback());}
execute_CausePostback(){
In UserControl class after clicking the submit button
Submit_Click(){
saveRecord();
raise event CausePostBack();
View 4 Replies
Mar 22, 2010
I've found posts about making a click event with jQuery for a button, however I need a little more then that. When any postback occurs on a page, I need to fire off a jQuery click event. Based on a condition, I want to continue processing (including running the server-side event code after the jQuery code), or, perform a redirect. I'm not quite sure how to go about this.
View 1 Replies
Dec 30, 2010
I am using the following code to load user control on to ASPX Page, which under a Master Page:
[Code]....
The user control name is passed as a parameter on the URL.
Inside the user, there is a LinkButton. The link button has a simple server side code for OnClick event.
Everything is working fine on the production machine, but, on the Development machine, I can see incorrect behaviour. I have started making some development changes on the Development Machine since several months back, and it will be very difficult to find out what caused the problem.
When I click the LinkButton inside the user control, the user control is removed from the parent page, and the OnClick event of the LinkButton is not firing.
I did debug, and found out that after I click on the LinkButton inside the user control, then the Page Load events for the master page and the ASPX page are working fine, and the IsPostBack is set to true, but the OnClick event of the LinkButton is not firing.
View 5 Replies
Mar 1, 2011
I have a gridview called gvResults. In the gvResults_RowEditing event I add a row below the one selected. In that new row, which spans all columns, I insert a user-control. There are two buttons and some textboxes in the user control.
My problem is that when I click one of the user-control buttons it never gets to the button event handler, I think because the user control is not recreated on the page postback. How can I have the user-control events fire before the parent page events fire?
I tried using an update panel, but I still get the parent posting back before the user-control events.
View 3 Replies
Sep 8, 2010
Is there a client side event that occurs on a user control when its parent submits to the server?
View 1 Replies
Jun 25, 2010
I have searched around but unable to find a solution that will work. I have a link button that is created dynamically during the page load. It is given an ID (obviously). There is a script manager on the page. I have the controls added to a panel in the updatepanel (updatePanel1). There is a dynamic label that is also created with each link button. I can get a response from the linkbutton click event during a postback on the second time clicking the linkbutton, but I am getting a complete postback instead of the asyncpostback for that control. During the creation of the dynamic linkbuttons, I am also creating a dynamic trigger for each button and adding it to the updatePanel1. The Click event is not firing the method without doing a complete page postback.
View 4 Replies
Mar 2, 2011
Here is my requirement -
1. I need to load a user control on link click event of a link button during postback of aspx page.
2. On button click event of a save button on that aspx page, I need to read the selected values from that user control on further postback.
If I write the loadcontrol code in link_click event, the control is not recognized at all in the button_click event. When I shift it to page_init and execute only during not postback, the user control loads with default values.
View 1 Replies
Aug 21, 2010
i am having 2 imagebuttons a gridview and a button. Now if i clicked on Image button i will show a grid. Now under button click i would like to capture which image button was clicked if 1st image button is clicked i would like to some values and if 2nd one is clicked i would like to show another
View 2 Replies
Jun 1, 2010
In my default.aspx page I have a PlaceHolder control within an UpdatePanel. In this placeholder control I will dynamically load a web user control, which is just a form with a submit button. On this user control, I have the form within an update panel and I have the "Submit" button's Click Event added to the triggers.
When I submit the form, the UpdatePanel on the web user control nor the update panel on the default.aspx page are capturing the post back, thus causing a full post back which refreshes my page.
how to capture this post so its rendered in Ajax and not a full post back?
View 1 Replies
Jun 14, 2010
I have a webdayview control (Infragistics proprietary ASP.net control) on my page. On the aspx source I've inserted some javascript (webdayview_click - clientside click event) that calls a webmethod in the codebehind. This seems to work fine, but when I
insert this webdayview control into a user control and move the corresponding javascript into the aspx of the user control, it doesn't work. I can't even insert a breakpoint into the javascript function to debug it. Is there a way to make it work? I want to enable the click event of the webdayview control so that when I click on it, the javascript function calls the webmethod. Here's my code (remember it is inside a user control):
[code]...
I posted this question on the Infragistics forum but didn't get any replies. Hopefully I'll get some here. :)
View 2 Replies
Jan 31, 2011
I have created one user control for changing the theme of the page where i have several buttons and on click of each button i am applying the theme of clicked buttons color and for that i have created several css files like red.css, blue.css , green.css etc.
now i want to apply this theme to the page but i am not able to do that from the user control as because i am not getting the stylesheet property in the page and thus i am not able to work further.
can anyone tell me how can i apply the theming from user control to the page its being called.?
View 2 Replies
