I use "ProductList" fuction to list All products.
Public Function ProductList() As System.Linq.IQueryable(Of Northwind.Products)
Now I want 2 Subquery from of above results . I want to save ProductList to DataTable or ... so that I only Connect to DB One and then Use Below subqueries from Sub1: Takes 1 record from "ProductList" results.Sub1: Skip 1 record and take 10 records from "ProductList" results.
i m using L2S for database operations in my asp.net mvc application i have following simple query in my repository
[Code]....
below is the defination of GetDayPassed method
[Code]....
there is no compile time error, however, when i execute the code it gives me invalidOperationException with following message.
[Code]....
can i get around this? if calling a method in query is not allowed how can i make a simple calculation in Linq query instead of calling GetDayPassed method?
im doing an update in web page by pressing a button. At the start some of the update was from a trigger, but i decided to put the hole update statement in the web page as an updatecommand in VB. this is the error
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.The statement has been terminated.and this is the code.
[Code]....
the error is in the updatecommand. And i dont know what is it.
I am creating a composite control. On the selection of item in the dropdownlist, the result should be shown. But its mismatching the result. Here is the code for the control:
[Code]....
If I have a breakpoint on the selection index changed event of the dropdownlist, then on every selection it should go to the event. Problem is when I select an item which makes the "singlelineText" textbox to appear and after it I select any other item, it doesn't stop at the dropdown event instead it goes to the "CreateChildControls" method of the composite control which results in wrong data.
I have this ListView that has a Drop Down List.Everything works fine (I think/hope) except that the drop down list are not showing its result correctly.This is the code.
Front-End
[Code]....
The code behind consist of the page_load and the ItemDataBound
[Code]....
[Code]....
_
[Code]....
I'm having a problem with my Linq to XML query. I'm getting the result data I want, but it's nested so deep that there must be a better way.Here is my XML:
[Code]....
I'm trying to get a list (simple string[]) of all Item IDs where Category Names contains "Other".Here is my Linq:
[Code]....
[Code]....
Here is a snapshot of my result from Visual Studio:The results I want are there ("item100", "item400", "item500"), but buried so deeply in the results var.
How can I get the query to return a simple
string[] = { "item100", "item400", "item500" }
I have a problem regarding this code:
select NotificationID, (select u.UserName from aspnet_Users u, notifications n where u.UserId = n.FromID) as 'UserName', [Message], DateCreated, TypeID from Notifications n, aspnet_Users u
[Code]....
I always received an error of: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I have been utilising a SELECT query such as the following:
SELECT SRFILE.SR_GROUP, SRFILE.SROWNERSHIP, SRFILE.SRCONMAE, BSFLBWF_1.Incidentx,
BSFLBWF_1.Severityx, BSFLBWF_1.Openx, BSFLBWF_1.Closex, BSFLBWF_1.Closurex, BSFLBWF_1.Customerx, BSFLBWF_1.Availabilityx, BSFLBWF_1.KPIx,
CONVERT(Decimal, BSFLBWF_1.Minsx) AS Expr1, BSFLBWF_1.Unusedx, BSFLBWF_1.FirstIntx, BSFLBWF_1.RepeatIntx, BSFLBWF_1.Corex,
BSFLBWF_1.OffPeakx, BSFLBWF_1.NonCorex, BSFLBWF_1.DedTypex, CONVERT(money, BSFLBWF_1.SchoolChargex) AS Expr2, CONVERT(money,
BSFLBWF_1.LANMLEChargex) AS Expr3, BSFLBWF_1.KPIFailx, BSFLBWF_1.Overridex, BSFLBWF_1.Reasonx, BSFLBWF_1.Contactx,
SRFILE.SR_CLOCK, SRFILE.SR_BACK_REASON, CONVERT(int, BSFLBWF_1.Minsx) / CONVERT(decimal, BSFLBWF_1.FirstIntx)
* 100 AS PERCENTAGE
FROM support.SRFILE INNER JOIN
BSFLBWF AS BSFLBWF_1 ON BSFLBWF_1.Incidentx = SRFILE.SRONUMBER
WHERE (BSFLBWF_1.Closex IS NULL) AND (BSFLBWF_1.DedTypex = 'School' OR
BSFLBWF_1.DedTypex = 'LAN-MLE')
UNION ALL
The rest of the query continues as the above albeit selecting the same data from different tables and works fine.
The issue I have is that I want to Select some more data (another SELECT query) but with a different Where clause e.g. WHERE (BSFLBWF_1.KPIx NOT LIKE 'KPI%' OR
BSFLBWF_1.KPIx NOT LIKE 'Proactive%') AND (BSFLBWF_1.Availabilityx LIKE '')
The problem is that this WHERE clause returns data which the above in bold has null values for (and thus doesnt work). Im still selecting the same data its just the WHERE Clause has changed. Is it possible to run such a query? If so, can it be done via a sub query?
have 2 tables in SQL 2000 developer edition identicals, Prereception and eceptions, on the table Recepcions I have the following trigger:
CREATE TRIGGER [AumentaInventario] ON dbo.Recepcion
FOR INSERT
AS
declare @Codigo nvarchar (50)
,@Cantidad int
[code]...
I have a tables with data like this
Id BookId TagId
34 113421 9
35 113421 10
36 113421 11
37 113421 1
38 113422 9
39 113422 1
40 113422 12
I need to write a query (SQL Server) which gives me data according to the tags say if I want bookIds where
tagid =9 it should return bookid 113421 and 113422 as it exists in both the books, but If I ask data for tags 9 and 10 it should return only book 113421 as that is the only book where both the tags are present.
SQL query:
I have a hierarchy structure like:
B reports to A
C reports to A
D reports to A
E reports to B
F reports to B
and so on......
So, when A logins he should be able to see B,C,D(who are reporting to A) and also E,F(who are actually reporting to B and not directly to A)Please help to write such sql query.
im working on visual Studio 2010, and i have an error on an update.
this is the code in VB.
[Code]....
Thats the code and the error is:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.`
Using this call;
<asp:AccessDataSource id="AccessDataSource2" runat="server" DataFile="_database/92592_Web.mdb" SelectCommand="SELECT *, (SELECT MAX(ID) as Max_ID
FROM myMovies) FROM [myMovies] WHERE ([ID] = ?)">
<SelectParameters>
<asp:QueryStringParameter DefaultValue="1" Name="ID" QueryStringField="ID" Type="Int32" />
</SelectParameters>
</asp:AccessDataSource>
How can I use "Max_ID" as my DefaultValue? So that basically if the page gets passed without a parameter, the SQL will use the Max(ID) as a default. Can I use Max_ID as a DefaultValue?
I'm an old .asp developer still on the learning curve of .NET so some of this stuff is a little daunting. In .asp doing something like this was pretty easy...
query in SQL Server Express, which worked fine, now I am trying to do it in WebMatrix using a Compact 4.0 db but it gives me an error.
SELECT *, (SELECT
count(1)
FROM Posts
WHERE CategoryI
[code]...
I need to run a query on server1.database1 where subquery meets criteria on server2.database2. Here's my code:
[Code]....
I tried replacing connectionstrings:connectionstring2 with server2.database2.dbo.scheduledvisits but it didn't know where to look to find that besides by using connectionstring1.
I have a SELECT query which grabs data from two different tables however when I run the query the CurrentCallOwner often pulls up the same name twice albeit with a different SLAFailed value. What I am trying to do is bind those two values into one. I thought that running a subquery and using a count would solve this however I all receive are a bunch ones. Do you know how I could bind those values into a single value (i.e. add them up?)
SELECT CurrentCallOwnerx, SLAFailed, COUNT(CurrentCallOwnerx) AS Expr1
FROM (SELECT BSFLBWF_1.CurrentCallOwnerx, COUNT(BSFLBWF_1.Incidentx) AS SLAFailed
FROM .SRFILE INNER JOIN
BSFLBWF AS BSFLBWF_1 ON BSFLBWF_1.Incidentx = SRFILE.SRONUMBER
WHERE (SRFILE.SR_GROUP = '38') AND (BSFLBWF_1.KPIFailx = '1') OR
(BSFLBWF_1.SchoolChargex > '0.00') OR
(BSFLBWF_1.LANMLEChargex > '0.00')
GROUP BY BSFLBWF_1.CurrentCallOwnerx
UNION
SELECT BSFWES_1.CurrentCallOwnerx, COUNT(BSFWES_1.Incidentx) AS SLAFailed
FROM SRFILE AS SRFILE_1 INNER JOIN
BSFWES AS BSFWES_1 ON BSFWES_1.Incidentx = SRFILE_1.SRONUMBER
WHERE (SRFILE_1.SR_GROUP = '38') AND (BSFWES_1.KPIFailx = '1') OR
(BSFWES_1.SchoolChargex > '0.00') OR
(BSFWES_1.LANMLEChargex > '0.00')
GROUP BY BSFWES_1.CurrentCallOwnerx) AS derivedtbl_1
GROUP BY CurrentCallOwnerx, SLAFailed
I have been trying to create a sql statement that uses a subquery to join 2 oracle tables to create a strongly typed table adapter. For example:
Select productName, (select categoryName from categories where categories.category_id = products.category_id) as Category from Products
The ASP .Net tutorial I am working through recommends using subqueries instead of joins for the insert, update and delete commands to be automatically generated by Visual Studio 2010. When I click Finish in the table adapter wizard I get the following error (I am using MySQL version 5.1 and the MySQL Data Connector 6.3.5)
Generated SELECT statement.
Error in SELECT clause: expression near 'SELECT'.
Error in SELECT clause: expression near 'FROM'.
Missing FROM clause.
Error in SELECT clause: expression near','.
Unable to parse query text.
I have a table line (ID, LineNo, LineName) having values as :
1, 1, <blank>
2, 2, <blank>
3, 3, <blank>
ID is PK with Auto-Increment and LinNo(I am manually incrementing through ASP.Net Page while record insertion) Now i have to write a query such that it updates LineName column from line table which is blank(as shown above) with values from table linet(linenamet) having values as :
a
b
c
My trial query is :
update line set LineName = (select linenamet from linet);
It gives ERROR as : Subquery returns more than 1 row
Expected Result : After Updation it should show line table as :
1, 1, a
2, 2, b
3, 3, c
[Code]....
Update multiple records with subquery
I am wondering there is no one asking this question on the internet even I have used google. (May be I am using a strange way on this case)
Here is the insert statement with select statement
Insert into a_table (ref, user, pw) values ((Select max(ref)+1 from reference_table), txtUser.text, txtPw.text);
Ignore the sql injection first, this statement is incorrect. Any idea? thx.
I have the following SQL Stored to get all online valid articles in my ASP.NET news application:
[Code]....
I'm trying to check if the article checked as never expire when added to the data base and if not checked I need to check if today is between article start and end date.The statement worked but only when added the first article but when there are more than one article it returns with the following error :Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression
I'm working on an ecommerce project that is missing 5,000 product pictures.
I am trying to assign all products without pictures into a category located on a mapping table.
I know an insert can be accomplished from one table (or subquery) to another but I only need to find the product IDs and insert them with default values into the category mapping table that has all non-null columns.
The following code is the farthest I can get without help (I'm not strong in SQL), it won't work because my subquery returns many rows while the SQL statement is designed to insert one - I don't know how to handle this...
[Code]....
Any help would be appreciated from those more experienced than I. BTW... there are no known search results for this type of solution - if there is even a solution.
Background: I use stored procedures exclusively for an ASP.NET application. I am using a DataReader to load a dataset object.
View 4 Replies