Web Forms :: Timer Control In Markup, But Code-behind Saying "not Declared"
Dec 28, 2010
When I first created a timer (Timer1) I handled the Tick event. No problem, intellisense worked and the timer control was declared then. I toggled it's enabled property, no problem.
I just went to look back at the _Tick event for the Timer1 control, and it has the blue underline mark in VWD that says that Timer1 is undeclared. I looked back at the markup and the <asp:Timer ID="Timer1" runat="server" ... /> control is there. I don't understand why all of a sudden my code-behind class is not recognizing the ID of my timer control.
The page runs fine, but it is throwing me off why VWD is seeing this as an error when I hard-type the control name.
View 9 Replies
Similar Messages:
Dec 29, 2010
I'm new to custom server controls and I'm hoping to use them to build various 'modules' for different sites I build to cut down on duplicate code.I'm familiar with custom user controls in which I can create an .ascx & .ascx.vb file which can then be imported into an .aspx page and used freely.However, with custom server controls I cannot find a way of using markup/html code. Is this possible at all or must all code be created programmatically?
View 1 Replies
Nov 25, 2010
VS2010 ( Vb.net ).I have a masterpage that contains a gridview, giving stats and information on client files sent to us. This gridview is updated by means of a timer control every 10 seconds. In my grid I have an image field, to display either a tick .. if everything is ok or a cross for any problems.When the timer control timer event forces a gridview databind every 10 seconds.When the page first loads, i get the default red Cross in the gridview imagefield, however when the timer loops forces a 'databind' I lose the redCross and it is replaced with the default image control ( as if no url is set ) . Then I get a server 404 error.I am using the OnDataBound event to fire my vb sub. I have commented out evertything just to get a solid starting point but im still getting errors.
[code]...
View 10 Replies
Feb 9, 2011
I have a public property defined in code behind of a user control. I want to toggle visibility of controls in the markup based on the property's value.
However, using the following syntax:
<td style="display:<%#(Container.PageControlMode == PageControlMode. PageMode.Wizard) ? "none" : "inline" %;">
I have the following property in my code behind:
public PageMode PageControlMode { get; set; }
Does not work and generate errors.
View 1 Replies
Jul 21, 2010
anyone have a sample code for timer control ? i have been looking for timer control by Google. i dont have proper workable timer control for asp.net.
View 10 Replies
Jan 29, 2010
I'm building form validation controls for our C# ASP application. The bulk of the work is handled by a BaseValidator control (subclassing System.Web.UI.UserControl), which also has the markup for the validation output. This is then extended by subcontrols like PasswordValidator, that provides the Validate method and any extra fields needed by that validator control.
(The end goal is to have controls like <uc1:PasswordValidator ControlId="txtPassword" /> which we can plop into any form with minimum duplication.)
However, PasswordValidator.ascx.cs cannot access the form elements defined in BaseValidator.ascx; the only way I've found to do so is to duplicate the markup in each subcontrol's *.ascx file. How can I extend BaseValidator.ascx.cs and access BaseValidator.ascx's markup in the subclass?
View 3 Replies
Apr 11, 2014
i want to display time on my screen and therefore i used timer control inside update panel and set my timer interval to 1000 but the time displayed after 3 seconds i mean 56 -53-52-49..... how to solve this below is the code
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Timer ID="Timer1" runat="server" Interval="1000" OnTick="Timer1_Tick">
</asp:Timer>
<asp:Label ID="Label2" runat="server" Font-Bold="True" Font-Names="Microsoft New Tai Lue" Font-Size="Large" ForeColor="royalBlue" Height="25px" Width="162px" ></asp:Label>
</ContentTemplate>
</asp:UpdatePanel>
View 1 Replies
Apr 13, 2010
I'm trying to add some basic HTML markup to my code-behind, just a H1 and a few breaks separating strings in the message.Body, but can't seem to get it going without errors.
[Code]....
Probably a straightforward thing, or not intended usage at all,
View 4 Replies
Dec 1, 2010
I have a Master Page which controls the styling of my site. In the Code Behind, there are a few class instances instantiated as well as variables. These classes validate user access and then create user objects
I have a few Web Content Forms which carries out instructions based on the user objects. So far it seems that on each Web Content Form I have to create new instances of the classes found on the Master Page. This is doubling my work for every Web Content Form.
Is there anyway I can inhereit Classes and objects instantiated in the Master Page Code Behind?
View 2 Replies
Jun 1, 2010
Is it possible to do things in a PHPish way in ASP.Net? I've seen <%= %> but I've tried it and couldn't get it to work. The PHPish equivalent of what I want to do is
<script src="<?php echo ResolveUrl("jquery/js/jquery.js"); ?>"></script>
View 1 Replies
Apr 4, 2011
What is the Best way to write my own HTML from code behind?
i currently use this :
<asp:Literal ID="ltr" runat="server"></asp:Literal>
and from code behind :
ltr.Text = "<p class="specific-class"></p>";
is it a right to do something like this?
View 2 Replies
Dec 17, 2010
I have an aspx-Page with an anchor-tag. Itīs href has to take a parameter of thepage, which is a public member.public int CommissionId
{
get
{
//..
}
}
I know how to design the link in code-behind, but want to do it in Markup.I tried
<a href='<% String.Format(@"Details.aspx?commissionId=" + CommissionId) %>' runat="server" id="cancelLink" class="button" onclick="this.blur();"><span>Back</span></a>
View 2 Replies
Sep 1, 2010
I've been working on the ASP.NET Development Server recently (on an MVC project and I'm finding that it is inconsistent in how it serves the changes I make to my code. For example, I make a change to the C#/HTML/CSS/JS in the dev environment and run the page, and the change appears on the screen. But if I edit the HTML again and run the page again, the new change doesn't appear. Even ctrl+F5 doesn't do it. I have to stop the web server and run the app again for the changes to update. Has anyone else experienced this? Is there a way to sort this problem out?
If I'm working in IIS and I change something, a ctrl+F5 will always update the page with the changes I've made. I'd like the dev server to be as reliable.
View 2 Replies
Aug 28, 2010
While it has gnerally been advocated to separate code from mark up and all that, with the razor syntax and webmatrix all that is not valid anymore, I think. WebMatrix encourages code and mark up in the same page! So what is the best practice as far as code and mark up is concerned.
View 6 Replies
Jan 13, 2011
I have a legacy solution where all the DataSources are defined in the markup for all .aspx-pages. The problem I have with this is that the DataSource get instantiated several times since it is used in page, control... What I want is to have NInject to handle the instantiation of the DataSource so this doesn't happen. I have got that part to sort of work, but when the DataSource is defined in the code-behind instead of in the markup the Page property is not set on the DataSource, does anyone know why? A simple solution to this is to set the the Page property in a base class or something, but I do think that the property should be there and want to know why.
View 2 Replies
Mar 13, 2010
I am using .net 3.5 and I make Windows Service Where my windows service is starting properly and stopping also properly. And I put timer control in that in which interval 1000. But the event is not getting raise what can be the problem OnStart I am makingit timer1.enabled=true and Onstop I am making timer1. enabled =false for debugging purpose I am writing Log Entry at beginning of timer_tick event.
View 2 Replies
Dec 9, 2010
What I'm trying to do is take an instance of a control, and figure out what the markup would look like based on the property values set in the code behind. We've built a web-based web form designer. At the end of the design process we save the markup. For simple controls with supported types, generating the markup was easy. For complex controls with nested properties or unsupported types, we're faced with creating a custom markup generator for each custom control. I was hoping to find info out there that would jump start this development effort.
In simple terms, I have this:
Dim Ctl as Control = CType(Asm.CreateInstance("MyNameSpace.MyControl"), Control)
Ctl.Name = "Name of my control"
And I want to end up with this:
<cc1:MyControl ID="MyControl1" runat="server" Name="Name of my control" />
View 1 Replies
Mar 25, 2011
Here upon loading the page there will be 4 panels having their own timer controls (having interval 1000) for incrementing a variable "a". But the problem is that, as I have used static variable that's why all the timer's are sharing the variable "a" and creating a problem like each panel's label showing a value incremented by 4 after every second. Can any body solve this problem..
<asp:ListView DataSourceID="sqldtsrclivepdt" ID="livepdtlst" runat="server">
<LayoutTemplate>
<ul class="productlist">
<asp:PlaceHolder ID="itemPlaceholder" runat="server"></asp:PlaceHolder>
</ul><br />
</LayoutTemplate>
<ItemTemplate>
<li>
<asp:Panel ID="pnllivepdt" CssClass="paneldesign" runat="server">
<asp:UpdatePanel ID="updtpnlbid" runat="server">
<ContentTemplate>
<asp:Label ID="lblbidtimer" runat="server"></asp:Label><br /></ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="tmrpnl" EventName="Tick" /></Triggers>
</asp:UpdatePanel>
<asp:Timer ID="tmrpnl" Enabled="true" Interval="1000" OnTick="tmrpnl_Tick" runat="server"></asp:Timer>
</asp:Panel>
</li>
</ItemTemplate>
</asp:ListView>
static int a=0;
protected void tmrpnl_Tick(object sender, EventArgs e)
{
Timer tm = sender as Timer;
Panel p = tm.Parent as Panel;
Label lt = p.FindControl("lblbidtimer") as Label;
a++;
lt.Text = a.ToString();
}
View 4 Replies
Apr 15, 2010
i want to know how to apply timer control on asp.net web pages.in my web application i m having assessment pages, where i am retrieving question and answer from database.everything is working fine but i want some kind of restrictions, like Assessment Time(20 Minute) so user can attempt question for specified time only.there should be a time limit.
View 3 Replies
Jan 18, 2010
How can i show multiple images with one imagebutton?For example 20 images per sec.
Here is my code.I tried timer control but it didn't work.
[Code]....
View 2 Replies
May 16, 2010
I am doing a countdown with a timer that runs every second. I have a scriptmanager, but how do I make it update behind the scenes so the user does not see it? I thought I could use an update panel, but I can't get it to work right.
View 1 Replies
Jun 22, 2010
I have a web form with multiple button in asp.net with c# code. i want to change the setfocus and button color with the help of timer with 1000 interval. i am able to change the setfocus multiple button in asp.net web page with the help of timer.
View 1 Replies
Feb 18, 2011
I have a timer control on my gridview that refreshes it at a 3 minute interval, but when a user is updating the gridview it will mess us the update and then they have to start over again. How can i set some kind of focus event on the gridview to shut off the timer update that refreshes the gridview.
View 2 Replies
Nov 2, 2010
ASP.net VB timer control: in the code behind, when I change a value of a textbox on other control. It does not change if not in panel. Anyway to change a value if not in teh panel.
Sub UpdateTimer_Tick(ByVal sender
As
Object,
ByVal e
As EventArgs)Dim x
As
Integer
DateStampLabel.Text = DateTime.Now.ToString()
(L_ticks.Text= CInt(L_ticks.Text) + 1
If (cint(L_ticks.Text) = 10 Then L_start.Text
= DateTime.Now.ToString() ' reset value not in panel
l_diff.Text = DateDiff(DateInterval.Second,
CDate(L_start.Text),
CDate(DateStampLabel.Text))
End
Sub
View 5 Replies
Jun 24, 2010
Consider sample piece of code in asp.net which has a master page associated with it
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolderA" Runat="Server" >
<asp:TextBox ID="TextBoxB" runat="server" CausesValidation="True" Height="96px" Width="426px" />
</asp:Content>
When the page is rendered in browser id generated for textbox with id "TextBoxB" is
ctl00_ContentPlaceHolderA_TextBoxB
Below is the equivalent html code.
<input name="ctl00$ContentPlaceHolderA$TextBoxB" type="text" id="ctl00_ContentPlaceHolderA_TextBoxB" style="height:96px;width:426px;" />
Is it possible to have same id of TextBoxB in both HTML and aspx page.
View 3 Replies
