Web Forms :: Try / Catch Block Won't Write Javascript?

Jun 10, 2010

Since everyone yells at me that MessageBox doesn't work when the project is uploaded to the server, I need to migrate to javascript alert box. As I was changing my MessageBoxes, I tested and found that they weren't being produced. I'm not sure if it matters, but they are in a try/catch block, which is shown here:[Code]....

This all worked before when I had MessageBox - it showed, then the page redirected when I clicked Ok.

I either don't understand how try/catch works, the javascript isn't adding, or Response.Redirect is executed before I can see the alert box and click Ok on it.

(just as a note, everything works fine, but the alert box doesn't show)........if I add the (javascript) code before the try block, the alert box comes up, so it's not something wrong with the writing of the javascript or executing it at least (I think).

View 7 Replies


Similar Messages:

Web Forms :: When And Where To Write Try Catch Block

Mar 31, 2010

When to write try catch block?

Should I write it for each method or only in event handlers or ????

What happens when an exception occurrs? What is the stack for exception?

If I use it at entry point (event handlers) then how do I get actually at which line error occurred?

Suppose an exception was thrown from Data Access Layer How do I get it in presentation layer that exactly in which class method at which line why that error occurred?

Is it true that excessive use of try catch makes application slow?

View 3 Replies

C# - JavaScript: How To Surround An Auto Generated JavaScript Block With Try/catch Statement

Jan 17, 2011

In the Script documents that asp.net automatically generates how can I surround the whole generated scripts with try/catch statement to avoid 'Microsoft JScript Compilation error'

My issue is: i got a DevExpress control (ASPxGridView) that added and set-up in run time, since i activated the grouping functionality in the grid I still get JS error says ';' expected whenever i use (click) on one of grouping/sorting abilities, I activated script Debugging for IE, in the JS code turns out that there is no missing ';' and once i click ignore for the error msg that VS generates every thing works fine, and surly end-user can't see this msg so i figured out if i try/catch the script that may help avoid this error.

View 1 Replies

Calling JavaScript Function From Code Beind (c#) Catch Block

Oct 22, 2010

I am trying to call a JavaScript function from my ascx control code behind in the catch blockI have tried the below two ways but they don't seem to work.

Page.ClientScript.RegisterClientScriptBlock(typeof(string), "script", "test();", true);
ScriptManager.RegisterStartupScript(Page, GetType(), "err_msg", "alert('error');", true);

View 3 Replies

Web Forms :: Loop Inside Try - Catch Block?

Apr 29, 2010

Can somebody show me a better approach of looping through a Try -Catch statement. I have something like this:

Try
dbConn.Open()
Catch ex As Exception
errmsg = ex.Message
End Try

I need to try to connect 5 times before logging an error. My first thought was to nest Try - Catch 5 levels but I didn't like that idea. I'm sure there is better solution to it.

View 6 Replies

MVC Exception Not Being Caught In Try Catch Block?

Jan 21, 2010

I have tried this on two different controller methods now, and both times, even if the linq2sql doesn't allow the data to be saved, the code never jumps into the catch block.

I've watched the noun object in the middle of the trace, and the isvalid property is false, but the modelstate isvalid is true. Either way, the code never jumps into the catch block.I'm pulling my hair out about this. I feel like it will be something really silly.

The code all works similar to nerd dinner.

NounRepository nounRepository = new NounRepository();
Noun noun = new Noun();
try[code]...

I'd rather not have to add code in this manner though, as it seems like an unnecessary duplication.

View 3 Replies

Invoking Function In Catch Block Using Vb.net

Aug 31, 2010

I have to call the function, when exception occured. Is it possible to call the function in Catch block (Try-Catch)? I have tried it but the function did not get invoked. What i have to do for it? Shall we unable to call the functions in Catch block? I have shown my code below.

Try

Catch ex As Exception
ErrorHandlers.LogErrorDetails(ex, Session("UserId").ToString, "")
Throw ex
End Try.

I knew, We can invoke this function in Finally block but i do not need as per my requirements.

View 3 Replies

C# - Error String In Catch Block?

Jul 22, 2010

i have the following code which show error from a string when there is a error

is there any way that i can make this in catch block?

main()
{
try
{
if (a==1)[code].....

Like below:i have the following code which show error from a string when there is a error

is there any way that i can make this in catch block?

main()
{
try[code]....

View 6 Replies

C# - Performance Cost Of A Try/catch Block?

Aug 13, 2010

Possible Duplicate:
Performance Cost Of ‘try’

I am being told that adding a try catch block adds major performance cost in the order of 1000 times slower than without, in the example of a for loop of a million. Is this true?

Isn't it best to use try catch block as much as possible?

View 7 Replies

If There Is A Return If Catch Block Will Finally Runs

Feb 9, 2010

is final run if htere is a return in catch blobk ?

example

try{

}catch(){[code]....

View 3 Replies

Databases :: Accessing Stored Procedure With Try Catch Finally Block

Apr 2, 2010

I wrote a stored procedure call with the format:

bool isValid=true;

using (OracleConnection myConn = new OracleConnection(connectionString))
{
OracleCommand myCmd = new OracleCommand("sproc", myConn);
myCmd.CommandType = CommandType.StoredProcedure;
myCmd.Parameters.AddWithValue("p1", a1);[code].....

Second format just doesn't feel right but I am not that experienced. I am curious if there is any downfall to that other than exception not being type specific.

View 4 Replies

DataSource Controls :: Specific Error Messages In Try Catch Block

May 23, 2010

How/Can I Set the try, catch statment to catch a specific Error. For example i am getting the following error:

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '='., [SqlException (0x80131904): Incorrect syntax near '='.]

Basicly The = is part of my SQL string which points to a table that currently doesent exist. I want something like catch ex as SqlException (0x80131904) or catch ex as SqlException = "0x80131904" or even catch ex as System.Data.SqlClient.SqlException = "Incorrect syntax near '='." I just want something so i can put "table doesnt exist" in the error message without having to use:

catch ex as System.Data.SqlClient.SqlException

As i have other code on my page that could result in a different type of sqlExeption.

View 4 Replies

C# - Blue Dotted Corner Around Catch Block In System.exception?

Oct 7, 2010

while doing debugging i found a blue dotted corner around catch block, while hovering it is showing system.exception...what does it mean and what to do

View 1 Replies

HttpHandlers / Modules :: Getting Exception Info From Catch Block To Application_Error Event Of HttpModule?

Oct 7, 2010

regarding one issue I am facing. I created a httpmodule for hadling the unhandled errors and I need to log those errors using log 4 net in database.Everting working fine but I am not getting any error information once the error was hadled and I need that info too. I want to make it as a centralize module which can trap all errors and log those errors.How call application_error event of httpmodule from catch block...so that I can log that info there and I no need log in every catch block..

View 1 Replies

Web Forms :: Display Error Message From Catch Block In Message Box?

Nov 11, 2013

no Massagebox not working in the web

at catch I want appear windows and retuen to....

try 
{
}
catch (Exception ex) {Console.WriteLine("Error reading from", ex); }

View 1 Replies

Write A Sql Query To Display Top 25 Records With A Catch?

Oct 11, 2010

I need to write a query as follows which will be bound to a grid

select top 25 * from ErrTable Order by DateErrorad Desc

However, I need to write this query to return only 25 records at a time, but when a user clicks next it will display the next 25 most recent records from the db.

View 8 Replies

Custom HTTPModule - How To Tell When Writing Last Block Of HTML In Write Method

Jul 2, 2010

I have written an Http Module that hooks onto the Response.Filter property of the current request and does various replacements within the HTML before it is sent to the client.All the work is done in the Write method which is overriding Write in the base class Stream.

The Write method is called multiple times for a single response - the HTML seems to be written to the output stream in chunks. My problem is that I don't have an efficient & reliable way of telling if the current chunk is the last chunk (for why I want to know this see below). The only way I have come up with is to check if the chunk contains a closing html tag - but this is not very efficient or reliable.

The reason this is needed is that the module must add the "Refresh" HTTP header to the response, but only if the HTML fulfills certain conditions (and there are certain conditions that mean the header must not be added). So, only when the last chunk has been seen does the code know if the header can be added or not. So, I either need a test for the last chunk, or on each call to Write I add the header if the current block of HTML passes the test (if it has not already been added) or remove the header if the current block of HTML fails the test (if it has already been added).

So, is there a better way to test for the last chuck OR is there a way to test for a particular header being in the response and delete it (there doesn't seem to be a way to do this - only to append headers)?

View 1 Replies

Web Forms :: Javascript Block Must Be Placed Before Html?

Jun 6, 2010

I'm new to ASP.net 3.5 and creating a test web site. I have created a master page for my web site with page content blocks. Now I want to use some javascript on the client side to provide for more interaction. I would normally create page specific Javascript functions and insert them in a <script block on the page. Howevere the Javascript script block must be placed before the <HTLM block. If I'm using Master Pages, it doesn't seem that I can use page specific Javascript functions. How can I resolve this problem? I think my options are

1) Don't use Javascript. Use ? instead to write client-side code.
2) Don't use Master Pages because you cannot use Page Specific Javascript functions.
3) Here's how to insert Javascript Functions in a Page with a Master Page.

View 2 Replies

Literal Control Inside JavaScript Block?

Dec 9, 2010

If I have an array variable singletext with javascript code like below

[code]...

How can I assign the value of singletext[0] and singletext[1] to a literal control literal1, that I grab from the code behind?

View 2 Replies

Javascript - How To Retain Script Block On A Partial Postback

Nov 20, 2010

This is a problem I'm facing in a webapp I'm currently working on. So instead of cluttering the question with unrelated code, I recreated the problem in an isolated, simplified webapp that only demonstrates this issue.

I have a web user control with just this as its content:

<% if (ShowAlertScript)
{ %>
<script type="text/javascript">
function AlertMe()
{
alert('Hello World!');
}
</script>
<% } %>
<input type="button" onclick="AlertMe()" value="Say Hello" />

And its codebehind has nothing more than the boolean definition of ShowAlertScript. This represents a control I have in the big webapp that has two modes: input mode, and display mode. When in input mode, it has a large javascript block that is only useful then; it does some cool stuff to help the user input the info.The way this control is laid out in the big picture is as follows:

<asp:ScriptManager runat="server" />
<asp:UpdatePanel runat="server">
<ContentTemplate>
<asp:MultiView ActiveViewIndex="0" runat="server" ID="mvw">
<asp:View runat="server">
<asp:Button runat="server" ID="btnSwitch"
OnClick="btnSwitch_Click" Text="Switch" />
</asp:View>
<asp:View runat="server">
<uc:MyInputControl runat="server" ID="micInput" ShowAlertScript="true" />
</asp:View>
</asp:MultiView>
</ContentTemplate>
</asp:UpdatePanel>

When you click btnSwitch, it simply switches to the second view with the user control. Notice how I have the ShowAlertScript already initialized to true. The potential output is that since I'm "showing the alert script" within the user control, the AlertMe() function will execute when you click the input-button element, because it's written out according to the inline if statement.

If you run this code I gave you so far as is, it will not work. The browser will say it can't see the AlertMe() function; it's undefined as far as it knows. But if you take out the UpdatePanel (or disable the ScriptManager's partial rendering), it will work just fine on a full postback when you click btnSwitch.

I want it to work on a partial postback, because this whole thing is a small piece compared to the rest of the page, and I don't want to do a full postback every time they switch views. Apparently, the ScriptManager doesn't even bother re-rendering the ascx file for possible changes. Either the ScriptManager is not smart enough, or there is an option I'm missing to let it render the <script> so I can invoke its methods on the client side. A potential answer someone might suggest is "why don't you take out the javascript, put it in its own .js file, and have the page reference it so it's available to the control?"
That won't really work with me, because the script block does some initialization and modification that pertain to that single control instance, not to all others on the page.

In turn, you might also be concerned that if I have more than one instance of the control, I end up with copies of the same script. Not really; there will only be ONE input mode of this control in a page at any given time, it's just that I have those two modes in two separate views and I let the user switch between them.

View 2 Replies

JavaScript - How To Disable Client Script Block Server Side

Aug 13, 2010

I have js script block (very long one that does editing capabilities to an invoice page).

I want to enable/disable this functionality on the server-side. First thing popped up on my mind was to say runat="server" to the tag, and set visible=true/false to asp.net, thinking asp.net does not render the HTML for non-visible items, so the block wouldn't load at all, which was what I wanted. But I quickly realized that saying runat="server" to client-side code was a real bad idea :)

What ar emy options, besides loading script from client side. Cuz I have other buttons that come from the server-that will enable dieable too.

View 1 Replies

AJAX :: Catch With Javascript For Error Trapping In Vb Page?

Dec 18, 2010

What is the trick to doing error trapping with javascript and Ajax controls in a VB.net page?

View 1 Replies

Javascript - Failing To Catch Server Error In Sharepoint?

Nov 4, 2010

I have an asp.net control that contains a grid view sitting on top of an Ajax update panel. The control has been added to a sharepoint page. When a button is clicked, some server code is called to store the contents of the grid. If the server code throws an error, I want to spit out a javascript alert displaying the error message, but for some reason the error that bubbles up from the server is the generic 500 server error, which doesn't contain any details of the original error.

View 1 Replies

Web Forms :: Menu Item Block / Master Page That Has Block Around The Text When The Page Is First Run?

Jan 29, 2011

I have menu item on my master page that has block around the text when the page is first run. I wrote in the css on the link and visited property to change the color to match the image color that it is on. When a menu item is clicked the color changes to the right color. How do I get it to the right color on when the page first opens or is there a way to get rid of the block or make it transperant?

View 1 Replies

DataSource Controls :: Catch Don't Catch Any Error From SQL 2000 Transition Store Procedure

Feb 7, 2010

Here is the code copied from [URL] In asp.net code behind, I use try-catch try to catch any error but never catch it. In SQL database, if I rename Employees to Employeesx or change column DepartmentID to DepartmentIDx, record will not be deleted (it is right) without any error (it is wrong, suppose catch an error).

CREATE PROCEDURE DeleteDepartment
(
@DepartmentID int
)
AS
BEGIN TRANSACTION
DELETE FROM Employees
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
DELETE FROM Departments
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
OMMIT

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved