I have written some script to upload a file from my local PC to an FTP Location.I have a FileUpload Control on my Page and an Upload Button, when the upload button is clicked the following script is run:
Imports System
Imports System.Net
Imports System.IO
[code]...
Is there any way to use FileUpload control only for selecting a file and retrieving its path, without uploading its content?
View 5 RepliesI AM Using:
Microsoft Visual Web Developer Express 2010
My Development Server has:
Windows 7 Home Premium 64 Bit
IIS 7.5
ASP.Net 4.0
When I attempt to upload 1 file under 4mb, everything works wonderful When I attempt to upload 1, 2 or 3 files with a total size under 4mb, everything works wonderful When I attempt to upload 1 file, over 4mb or When I attempt to upload 1, 2, or 3 files that total over 4mb, a problem arises! And Continue to read and not assume it's just my Web.Config file, for I did attempt to set the maximum upload size to higher than 4mb, a copy of my Web.Config is included below!
Here is my Problem:
I have a need to upload 3 Files, 1 File being a .jpg file and the other 2 files will be .mp3 files. If I try to upload 1 file that is over 4mb or if the sum of the 3 files is over 4mb, I get a> The Regular Debug Message:
Maximum request length exceeded.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Maximum request length exceeded.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Code].....
I am experiencing the following page error when trying to use the FileUpload control on my web page to upload files larger than 3MB or so. The error is as follows:"Problem loading page The connection was reset The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."I suspect this may be due to a timout issue. If so, how can I increase the timeout period for this control / process? I am coding in VB.NET.
I am using the fileupload control to upload an excel file to a server, but I am getting a
"Access to the path '\<server>importResponses.xls' is denied" when I try to use fileUploader.SaveAs(filepath). The filepath I use is \<server>importResponses.xls, so I am actually saving it to a share on a different server.My environment consists of a web server and a database server. I am trying to upload the excel file to a share on the database server. A stored procedure then takes that excel file and imports the data from it into a table. So the problem isn't with being unable to save a file to a share on the web server, but it's a problem with being unable to save a file to a share on the database server. It used to work, but now it doesn't and I have no idea why. What process(es) on the database server do I need grant write access for in order for the fileupload control to successfully save the excel file?Right now, I only have the Network Service account with read/write access to the share on the database server. I tried adding other accounts, such as the ASPNET and IUSR_<server name> accounts, but nothing seems to work.The web application that does the actual uploading is configured like this:
<authentication mode="Windows"/>
<identity impersonate="true"/>
Could that have anything to do with it?If you're asking why I'm trying to save an excel file on the database server instead of on the web server, this was the only way I got this to work. If anyone has a better suggestion on how to programatically import excel data into a SQL table, I am all ears.
I have a question about saving an image file with it's thumbnail in vb.net.
I used the following code :
If resim.PostedFile.ContentLength > 100 And resim.PostedFile.ContentLength < 10000000 And resim.PostedFile.ContentType.IndexOf("application") = -1 Then
I am uploading an excel file ( containing int values )using the fileupload control. I need to work on one entire column in the excel sheet.I want to copy contents of the file either in an array or a table and then work on it.Can anybody suggest a better way of working on the excel since .
View 4 RepliesI use file upload control.........and below this there is upload button which include programming to upload file.........
It is working fine for file size of less than 2mb but when i pick file of 5 mb(say) and i click on file upload button or any other button then outcome is
Internet Explorer cannot display the webpage
I placed break point on upload button but control doesn't go their..........
In my application Im saving multiple files(image,pdf,txt) to a folder. Suppose I have an image with name "image1", if this image already exists in the folder and if another user tries to add another image with the same name "image1" then, it should give message to change the File name.
I had used below code:
string filePath = DamRep_FileUpload.PostedFile.FileName;
string filename = Path.GetFileName(filePath);
string contenttype = String.Empty;
if (contenttype != String.Empty)
{
if (File.Exists("~/FTP/File/"))
[Code] ....
but its not working.
[URL] .... I referred the article it works on local machine. But when i tried for online it gives access denied when saving image.
View 1 Replies where the file/data is saved on the server when uploading file using "fileupload control" and "saveas method".
The webserver is 2003 windows server. And .net framework I am using 2.0.
I have Fileupload control in my page
1-i want delete the text that is beside of fileupload button  text: no file choesn
2-i want change text of file upload button( Â I want change Choose file text)
I m using FileUpload Control , when i click the fileupload text box , Choose file window have to open.
View 6 RepliesWhen uploading a new DLL for a large web application (dll is around 1mb) IIS throws an error because the DLL is 'in-use', meaning the website is down while the DLL is being uploaded. Is there a way to stop this behaviour?
Also, although I am using Web Applications, not Web Sites, whenever I upload a new DLL it still takes a while for IIS to restart after a fresh upload. I thought this wait was generally only for websites as they need to be compiled by IIS, not Web Applications?
How to get data (read file) chosen in FileUpload control without FileUpload.SaveAs Method on the server? Is it possible write it at once to some object?
View 2 RepliesI have a FileUpload control in an UpdatePanel and when user select a file, the full file path will will be stored in a hiddenfield, and during postback, i would like to assign the full file path in the hiddenfield back to the FileUpload control textbox, possible to achieve that?
View 1 Replies Hopefully someone can give me some pointers to get this working properly.
I have a webpage which I would like the ability to upload files to be stored in a database. Here's the layout of the page:
[code]....
The update panel is configured as such:
ChildrenAsTriggers="True" EnableViewState="True" RenderMode="Block" UpdateMode="Always" Visible="True" Runat="Server"
The reason I have the update panel outside the Tabcontainer is so that when switching between tabs, the screen doesn't flicker with refreshes, etc. But as a result, I can't get the FileUpload working properly. The FileUpload1.Filename is blank, so it errors out.
Is there anyway to get this working properly? I've tried the latest AsyncFileupload within the control toolkit, but this caused all kinds of problems with my pages so that's out of the question. I tried an iFrame too, but this also didnt work properly.
while uploading the file on the local host it works fine.but the same coding does not work on the webserver. is there anything to do with the foldr read and write permissions.i m using the server.map for finding the path of the browsed file.
protected void btnLogin_Click(object sender, EventArgs e)
{
try
{
string fold = "images";
string Name = FileUpload1.FileName;
sring path = Server.MapPath("~" + "/" + fold + "/" + Name);
[code]...
i hv not used any database for storing the path of the image.
I need to upload from my local app to a IIS webserver...
I found this "CLIENT CODE" for my local app here:
[URL]
It is telling me to use:
[code]....
very easy!! but its incomplete...
- What is the code in the upload.aspx file?
I am with c# asp.net. How do we upload images to a repeater using file upload?
View 1 Replieslook at the picture, i want that image preview will come when i choose the file location before uploading to the database. is it possible?
EDIT: i found codes in other sites, they say those only work in IE, so it means currently, this preview function doesnt support FF? coz im using FF or sometimes google chrome.
I am trying to make a web application which copies the existing functionality of a windows forms application using Visual Studio 2003. This windows application takes multiple (I am talking at least 30) text files and joins them together into one text file which can then be feed into a Mainframe system in the correct format. I have written web applications before that uploads images and pdfs but the key thing is it was always only one or two files at a time, so this was easy to do with the HTML fileupload control.
What I want to do is to be able to open a directory on the local computer and either automatically, or give the user the chance to multi select (I dont think this is possible) all of the 30 or so files they wish to upload. Once its been uploaded I can do the processing to join the files and create my new one etc. All the examples I have seen on the web, you have to select the files one by one to add to a list box and then they can all be uploaded but this wont be acceptable to my users...
I have a Web application in which I'm trying to use the new AJAX AsyncFileUpload control. I want to use it in the ModalPopupExtender, and I want to embed these two AJAX controls in a user control (photo_upload.ascx) for re-use in different parts of the application. (I understand that this wasn't possible with the older FileUpload control but that it is with this most recent AJAX tool.)
Presently, I merely redirect the user to an upload.aspx page that includes the photo_upload.ascx control (see the sequential screenshots in the attached image); but while this way of doing things "works," it becomes very confusing for the user who has already clicked an upload button or two. In other words, when the "Add Yours" button is clicked, the panel with the "(1) Upload Photo" button unhides; and when the Upload Photo button is then clicked, the user is redirected to the control in the bottom screen. I would gladly bypass the 1, 2, 3 steps in the second screen after the "Add Yours" button is clicked and redirect straightway to the upload control (in the bottom screen, which I will like to be in a ModalPopupExtender), but I also need a way for them to enter a caption that will go with the uploaded photo.
(image removed)
My VB code for the above steps is included below. I would appreciate any fresh ideas on how to accomplish my above objectives.
[Code]....
I need to upload files from one site to another and I thought about using the WebClient class and FileUpload method from the System.Net namespace. I read the MSDN documentation and it seems an easy task to achieve but something is going on wrong. For now, I am only testing with the following simple code to upload a file to a test web server in our office which uses HTTP port 8080 instead of 80:
[Code]....
The code above issues the following exception: "The remote server returned an error: (404) No Found." I have made sure that both paths are correct.
Also, does the UploadFile method saves the file physically in the hard disk (I suppose so) or does it load it into the server's memory?
I'am Developing a commercial website using vs2005 and sql 2005,where my users will download and upload wallpapers and ringtones,so my issue is, i got the coding for uploading ,
But the problem is it is storing the files two times,
If FileUpload1.PostedFile IsNot Nothing Then
Dim FileName As String = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName)
FileUpload1.SaveAs(Server.MapPath("Images/" & FileName))
[Code].....