Web Forms :: Getting Error After Upgrading To Application ?

May 5, 2010

I have to get the value from a textbox (not bound) that has been put into a formview control. The Submit button also resides in the formview control. I have this code in the button's click method:

Dim TestValueTextBox
As TextBox =
New TextBox
[Code]....

to get that value entered and store it into the enteredValue variable (and yes, I know I have to do validation, etc). But when this runs, the value of the text in the textbox is "". I tried to put this up in the page load event, but then I get an error about declaring New.

View 8 Replies


Similar Messages:

Web Forms :: Error After Upgrading Website To VS2010 ?

Jul 21, 2010

I struggling trying to insert the value I select from a "DropDownList1" country list into a TextBox inside a FormView1. I have tried the following but It wont insert the text:I also tested on a textbox1 outside the FormView1 and it works but just after clicking Cancel or Inser in the formView1.

[Code]....

View 7 Replies

VS 2008 Upgrading Application With Web Setup Project?

Apr 27, 2010

i created a web setup project for my asp.net application. am trying to create an upgrade MSI that will only replace some few files in my initial installation (very minor upgrade). right now, am not getting it right because the whole initial set of files is been replaced. i guess i only need to change the package code, but i cant do this in VS.NET 2008.

View 6 Replies

Installation :: Web Application Not Running After Upgrading From Vs2005 To Vs2008 (IIS 7)?

Jan 25, 2011

I upgraded my vs2005 web application to vs2008, after i run the upgrade wizard,It l pop up one error which says that .net framework 2.0 is not available. I can compile the upgraded project but can not run that. I am wondering where in IIS, I can point the project to framework 3.0?

I ran the project, it had the following error,

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.

Requested URL: /XX/yy.asmx

Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955

the project was upgraged to vs2008, i am not sure why it still points to v2.0. Also i looked at the project file, I already upgraded the oracle data access dll(from oracle side) to higher version, it also points to the old version.

The other issue is when i open the Solution, It prompted me to create the virtual diectory: Http://localhost/XX, I clicked yes, will the vitually directory automatically generated? If i go to the view sites/add vitual directory, if i enter VeroValueXmllister, will it automatically generate the Virtually directory? Http://localhost/XX

View 3 Replies

Jscript Error After Upgrading To 2010

Jul 30, 2010

I have a webform that has a formview (fvwContract) and inside itemtemplate there is a Tabcontainer with three tabs (invoice (spanish: factura), receipt (spanish: recibo) and beneficiary (spanish: beneficiario). I have another formview inside invoice tab (fvwFactura) with many textboxes that I need to manipulate in code behind. The thing is that I canīt reference any of them like the following:

protected void DropDownList1_SelectedIndexChanged2(object sender, EventArgs e)
{


AjaxControlToolkit.TabContainer container = (AjaxControlToolkit.TabContainer)fvwContract.FindControl("TabContainer1");
[Code]....

how to reference any control inside frwContract.TabContainer1.fvwFactura?

View 1 Replies

After Upgrading / Getting Contains Is Not A Member Of System.array Error

Aug 17, 2010

I have a website I developed in VS 2008 targeting .net 3.5. It has worked well. I recently upgraded to VS 2010 and needed to make a few changes to the site. However, I'm receiving compile errors (haven't made any changes to the code yet--was just launching the site to make sure it worked ok). I get "Contains" is not a member of system.array. Everything I've read states that the contains method was added in .net 3.5, which I know to be correct because it was working in VS 2008. I've been targeting .net 3.5 in VS 2010, but it still isn't working. I also used linq quite a bit with linqkit to do dynamic queries and all of my linq queries were saying my queries weren't queryable (I don't have the actual error in front of me). Anyway, to fix that one, I had to import system.linq (I previously had system.data.linq and it was working fine). To reiterate, I haven't targeted my site to .net 4 in VS 2010, I've left it targeting .net 3.5.

I tried converting my arrays to arraylists since arraylists were still pulling up with a .contains method, but then it broke my linqkit queries when I ran it on the site.

Here is my linqkit query:

Dim str() As String = archlist.ToArray(GetType(String))
Dim str3 As New ArrayList
str3 = ArrayList.Adapter(str)
predicate = predicate.And(Function(l As CompatTesting) str3.Contains(l.application.cpuarchitecture))

Before, I didn't have the arraylist conversion, I just had str.contains and it worked great to generate a sql "in" statement. Now after using the code above, the site launches, but when I actually run the code, I get Method 'Boolean Contains(System.Object)' has no supported translation to SQL. I also tried upgrading my linqkit dll to the latest version but it didn't help.

My questions are, since I'm targeting the same .net 3.5 framework in 2010, why is it not allowing me to use array.contains anymore? Maybe if I can address that issue, it will fix my linqkit issue where it says "contains" has no supported translation to sql.

View 1 Replies

Installation :: Error Upgrading SQL Server 2008

Jan 5, 2010

i was normally using VS2005 and SQL server 2005... i upgraded to SQL Server 2008... and then... i could not build my project anymore... because of this error: Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

View 2 Replies

Configuration :: Getting Error Connecting To Database After Upgrading To .net 4.0?

Aug 22, 2010

I upgraded a Website to use ASP.NET 4.0, from 3.5. This involved setting it up on a different server, with the same hosting company. I'm using a shared hosting plan on Windows Server 2008.

Since migrating, it gives an error message when I try to login to the site:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

I'm using the same connection string as I did in the old version, which always worked. I also changed the permissions for the database to allow connections from the redeployed Website, via the host's control panel.

I have searched the web.config, and the source for the site, and I haven't been able to find a connection string that looks incorrect.

I've contacted the host about it, in case it is a configuration issue on their side.

View 2 Replies

Visual Studio :: EntityDesignerBuildProvider Error In System Web.config When Upgrading ?

Apr 13, 2010

My web site used ASP.NET 3.5 SP1, MVC 2, and EF. Last night I tried to upgrade to ASP.NET 4 (& EF4) under VS2010.

If my views are compiled (MvcBuildViews property is true), then the build fails with this error message:
Error 5 Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'. C:WindowsMicrosoft.NETFrameworkv4.0.30319Configweb.config 129

It's actually complaining about my system web.config file.

If MvcBuildViews is false, then it will run (and compile the views normally just fine).

OS: Server 2008 R2, all updates applied at time of writing.

View 4 Replies

SQL Reporting :: Error Upgrading From Server 2000 - 2008 R2 Services

Oct 6, 2010

I am having some trouble upgrading an existing SQL Server 2000 Reporting Services installation from an old server to a new one commissioned for this purpose, which is running SQL Server 2008 Reporting Services. I have been following the instructions here: [URL] but after trying to connect with reporting services 2008, i get this error: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.6.54'. The expected version is '147'. (rsInvalidReportServerDatabase) before starting the process, I ran upgrade advisor and got back the following results:

Description Setup can upgrade a SQL Server 2000 Reporting Services instance that uses a SQL Server 2000 Database Engine in the same instance. However, upgrade is blocked if the report server database is in a different instance, on a remote instance, or runs on a remote SQL Server 2005 instance in SQL Server 2000 compatibility mode.

*****
*note, our reporting services IS in the same instance as the SQL Server 2000 database engine. However, upgrade advisor still reported that this instance can not be automatically upgraded.
*****

Corrective Action Choose either approach to continue with the upgrade: Upgrade the Database Engine instance on the remote computer before upgrading Reporting Services. The server cannot be in SQL Server 2000 compatibility mode after upgrade. Move the reportserver and reportservertempdb to a SQL Server 2005 or SQL Server 2008 Database Engine instance, and then use the Reporting Services Configuration tool to connect the report server to the database.

so, I went with option 2, move the database then connect. I have: -backed up the ReportServer and ReportServerTempDB databases from the old server, transferred them to the new and restored them to the 2008 Server as ReportServerOld. -I then renamed the old database to ReportServer and ReportServerTempDB, as this is required to use the database as a source apparently. I had to of course change the existing database names to ReportServerNew to perform the rename. I backed up the symetric key for this installation using the rskeymgmt utility...............

View 2 Replies

Configuration :: Upgrading Website To Vs2010 And Framework 4.0 - Internal System Error 500 IIS 7.0?

Sep 3, 2010

I have recently developed a new vs2010 web application that I would like to add to my web site.

The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite

I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as

[Code]....

View 1 Replies

Forms Data Controls :: Error -"Input String Was Not In A Correct Format" After Upgrading To 4.0 (VS 2010)

Oct 22, 2010

I have a gridview that was displaying and handling postbacks correctly, that is, until I upgraded to .net 4.0 (vs 2010) from .net 3.5. Now I am getting the classic (and in this context meaningless) "Input string was not in a correct format" error upon postback. The postback is initiated by a command button and the row command event handles everything nicely.

The trace shows internal grid postback handling and nothing else:

[FormatException: Input string was not in a correct format.]
System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) +9594283
System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) +119
System.Convert.ToInt32(String value, IFormatProvider provider) +48
System.Web.UI.WebControls.GridView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +1047....

From experience, I know this happens on late binding with wrong type casting on the ASPX side of things. However, nothing has changed. The code is the same, the only thing that changed is the upgrade to 4.0.

I have tried everything I (and a coleague) can think of to figure out what the issue is without luck. No error is raised on the code behind in any method. The only error raised is the Page_Error event and the error object contains the same crap you see in the yellow screen dump (above).

UPDATE: I narrowed the issue down to the RaisePostBackEvent method. I had to reflect the System.Web (for educational purposes of course :) assembly to figure out the code executing after my RowCommand logic(which is fine) breaks. This happens in the HandleEvent method. It checks for known command names (e.g. Select) and if it can't find a match, it defaults to the following:

[Code]....

Is this a bug or am I doing something wrong? The row object is NULL which is why it defaults to the cast. The cast assumes the argument to be an integer however and in my case I am passing a string as an argument?

View 9 Replies

Upgrading Visual Studio Web Service Project Says To "convert To Web Application."?

May 4, 2010

I have a Visual Studio 2003 web service project that I have to upgrade to Visual Studio 2008. After I have run the conversion wizard, I get this message: You have completed the first step in converting your Visual Studio .NET 2003 web project. To complete the conversion, please select your projectin the Solution Explorer and choose the 'Convert to Web Application'context menu item.I got this message with another project, which was originally a "web site", rather than an ASP.NET "web application". It made sense to in that case (sort of). Why, however, would I not just want to have this project remain a web service project?Additionally, when I follow the instructions and select "Convert to Web Application" from the context menu, I don't get any feedback that anything has changed. Should it have?

View 1 Replies

Web Forms :: Classes Of Web Application - Server Error In '/' Application?

Jul 21, 2010

i have classes of my web application only the default one work if i for example click a link to go to another class i get this error for each class this happens . But only on the web server WHy ?

Server Error in '/' Application.

Parser Error

Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.

Parser Error Message: Could not load type 'WebApplication2.Login2'.

Source Error:[Code]....

Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Login2.aspx.cs" Inherits="WebApplication2.Login2" %>Line 2: Line 3:
Source File: /Login2.aspx Line: 1

View 4 Replies

Web Forms :: Try To Login Get This Error Server Error In '/' Application?

Apr 6, 2010

when i try to login i get this error Server Error in '/' Application.

Index was outside the bounds of the array.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.IndexOutOfRangeException: Index was outside the bounds of the array.

Source Error: [Code]....

Stack Trace: [Code]....

[IndexOutOfRangeException: Index was outside the bounds of the array.] login.ImageButton3_Click(Object sender, ImageClickEventArgs e) +775 System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86 System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115 System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746

Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

View 23 Replies

Web Forms :: User Control Stopped Working After Upgrading?

Aug 25, 2010

I have a c# control class inside of a dll, then this control is embedded in a web page in an asp.net application by using the object tag. When the dll is compiled with .net 3.5 sp1 and the web application also runs in .net 3.5 sp1, the code works fine. But when the dll is compiled in .net 4.0 and the web application runs in 4.0, the control does not show up in the web page. All I see is a box with an object icon in the upper left corner.

View 1 Replies

Forms Data Controls :: Strange Behavior After Upgrading To Win 7/Framework 4.0?

Feb 9, 2011

I have a site that was sucesfully upgraded to Framework 3.5 on Vista with VS2008. Now however after installing VS2010 and upgraded to Win 7 wierd things are happenning and was wonderring if any of you have experienced this and how you've dealt with it.First thing I notice in my main page that the four user controls are not in alignment. They should appear side by side in a single row, however now they spread acros two rows with one on top and three on the bottom. Also my graphics and navigation is not where they supposed to be. Just for comparison, if run the existing solution on Win 2003 with VS2008, it works like it supposed to. All the formatting is handled in .css and that didn't change either.

[Code]....

[Code]....

View 1 Replies

Social Networking :: FaceBook - Error Validating Application - Invalid Application ID

May 6, 2013

{
"error": {
"message": "Error validating application. Invalid application ID.",
"type": "OAuthException",
"code": 101
}
}

View 1 Replies

How To Handle .NET Application Error That Occurs On Application Start And Transfer

Mar 9, 2010

I know that ASP.NET MVC has error filter attribute to handle specified error type. However, this feature cannot catch any error that occurs when application start. Therefore, I need to add some code to "Application_Error" method for handling this error like the following code.

public void Application_Error(object sender, EventArgs e)
{// At this point we have information about the error
var ctx = HttpContext.Current;
var exception = ctx.Server.GetLastError();
[code]...

View 1 Replies

Social Networking :: Error Validating Application / Invalid Application ID

Mar 9, 2013

I am getting the error from ur sample codeError validating application. Invalid application ID.",

"type": "OAuthException",
"code": 101

though i have added app domain name as "localhost.com"and site url as "Http//localhost.com:port_Number"/.

View 1 Replies

DataSource Controls :: Insert An Items To The Sql Gives Error Application Server Error '/ WebSite6'

Apr 15, 2010

im working with visualstudio 2005 and sql server 2005 c#,and i tried to insert an items to the sql but it gave me this error

Application server error '/ WebSite6'.

The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students".The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.

The statement has been terminated.Description: The exception is unhandled occurred during the implementation of the current web request. the stack trace for more information about the error and where the source code.
Details exception: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students". The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.The statement has been terminated.

This error: Line 243: sql_comm.Parameters.AddWithValue ("@ studentId", Convert.ToInt32 (id));

Line 244: sql_comm.Parameters.AddWithValue ("@ CourseId", Convert.ToInt32 (ListBox3.Items [j]. Text.ToString
()));
Line 245: sql_comm.ExecuteNonQuery ();

Line 246: split_listbox2 ();

Line 247: sql_conn.Close ();

Source File: c: Documents and Settings Ronen My Documents Visual Studio 2005 WebSites WebSite6 SiteMembers CourseSignUp.aspx.cs line: 245

this it the code :[Code].... !

View 7 Replies

While Im Checking The Site It Shows The Following Error." Server Error In '/' Application?

Jan 31, 2010

I have uploaded all files to my server. and while im checking the site it shows the following error." Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster,ensure that <machineKey> configuration specifies the same validationKey"what i have to do/how to fix it.

View 3 Replies

ASMX :: WCF Service Consuming Error Code: Server Error In '/' Application

Aug 7, 2010

I have hosted a service in the IIS server, while consuming the service i am getting some error. I have mentioned the error code below.

Error code:

Server Error in '/' Application.

The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.InvalidOperationException: The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.

Source Error: [Code]....

Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614

View 1 Replies

Installation :: Upgrading From 3.5 To 4.0?

Jan 19, 2011

I upgraded my project from 3.5 to 4.0. Now I get:

Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies

escription: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified.

Source Error: [Code]....

View 2 Replies

.net - Upgrading 1.1 Framework To 4.0?

Aug 13, 2010

if i need to upgrade one version at a time (2.0, 3.5, 4.0) or if I can just directly from 1.1 to 4.0?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved