i was normally using VS2005 and SQL server 2005... i upgraded to SQL Server 2008... and then... i could not build my project anymore... because of this error: Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
View 2 RepliesMy company is looking to upgrade the web server from Server 2003 to 2008 (along with IIS of course). Currenty the websites are built using ASP.NET 3.5 (and a blog in PHP), is there anything that needs to be done to ensure the sites (forget the blog) still work on the new server? I'll no doubt upgrade the sites over time to use .Net 4 or MVC, but for the moment the transition needs to be almost seamless.
View 2 RepliesI am having some trouble upgrading an existing SQL Server 2000 Reporting Services installation from an old server to a new one commissioned for this purpose, which is running SQL Server 2008 Reporting Services. I have been following the instructions here: [URL] but after trying to connect with reporting services 2008, i get this error: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.6.54'. The expected version is '147'. (rsInvalidReportServerDatabase) before starting the process, I ran upgrade advisor and got back the following results:
Description Setup can upgrade a SQL Server 2000 Reporting Services instance that uses a SQL Server 2000 Database Engine in the same instance. However, upgrade is blocked if the report server database is in a different instance, on a remote instance, or runs on a remote SQL Server 2005 instance in SQL Server 2000 compatibility mode.
*****
*note, our reporting services IS in the same instance as the SQL Server 2000 database engine. However, upgrade advisor still reported that this instance can not be automatically upgraded.
*****
Corrective Action Choose either approach to continue with the upgrade: Upgrade the Database Engine instance on the remote computer before upgrading Reporting Services. The server cannot be in SQL Server 2000 compatibility mode after upgrade. Move the reportserver and reportservertempdb to a SQL Server 2005 or SQL Server 2008 Database Engine instance, and then use the Reporting Services Configuration tool to connect the report server to the database.
so, I went with option 2, move the database then connect. I have: -backed up the ReportServer and ReportServerTempDB databases from the old server, transferred them to the new and restored them to the 2008 Server as ReportServerOld. -I then renamed the old database to ReportServer and ReportServerTempDB, as this is required to use the database as a source apparently. I had to of course change the existing database names to ReportServerNew to perform the rename. I backed up the symetric key for this installation using the rskeymgmt utility...............
i'm getting error while installing sql server on xp sp2. i have already installed visual studio sp1. while installing sql server it install hotfix for xp KB942288-v3 and KB954550-v5 after show following error message. SQL Server Setup has encountered the following error: Object of type 'Microsoft.SQL.Chainer.Package.PropertiesTypeProperty' cannot be converted to type 'Microsoft.SQL.Chainer.Package.PropertiesTypeProperty'..
View 2 RepliesI'm having difficulties with a clean SQL Server 2008 + SP1 (64 bit) install. I'm using Windows 7 Ultimate 64 bit with VS2010. The Microsoft SQL Server 2008 Service Pack 1 (KB968369) is installed via Windows Update. I installed SQL Server Management Studio (64 bit) via the Microsoft website. When I open SSMS and try to login with Windows Authentication to (local)/localhost/[computername] I get the following error:
[Code]....
I don't understand this because I opened the inbound/outbound ports for 1433/1434. As wel as inbound/outbound exceptions for the programs
%ProgramFiles%Microsoft SQL ServerMSSQL10.SQLEXPRESSMSSQLBinnsqlservr.exe
%ProgramFiles% (x86)Microsoft SQL Server90Sharedsqlbrowser.exe
The configuration manager is configured as follows: Microsoft SQL Server 2008 Service Pack 1 (KB968369)
I have been writing c# .net in MVS 2005 conneting to a sql 2005 db, after initial setup about a million years ago, everyhting ran smoothly. Then I upgraded to MVS 2008 connecting to a sql 2005 server. Still all good. Now my IT department FINALLY wants to upgrade the sql server (Stand alone server running on win server 2003 r2). I am wondering if there is a checklist or walk through of steps i need to take to keep connettivity. If I shoiuld build new connection strings for example, or should the current connections be ok to find the server/db/tables provided the server name and permissions haven't changed? Here is a snippit of my config file
...
<remove name="LocalSqlServer" />
<add name="debugConnectionString" connectionString="Data Source=UMAURSQL;Initial Catalog=debug;Integrated Security=true;"
providerName="System.Data.SqlClient" />
...
SQL Server Express 2008 R2 installation is failed...plese see the error log ...i gave the password "sa"..please guide me Overall summary Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit message: The specified sa password does not meet strong password requirements. For more information about strong password requirements, see "Database Engine Configuration - Account Provisioning" in Setup Help or in SQL Server 2008 R2 Books Online.
View 1 RepliesI upgraded my project from 3.5 to 4.0. Now I get:
Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies
escription: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified.
Source Error: [Code]....
I am looking at developing using Visual Studio 2010/2008 and SQL Server 2008 on Windows 7. Should I be able to do this on Windows 7 Professional, or do you need Windows 7 Ultimate?
View 2 RepliesAfter I installed Visual Studio 2008 Standard edition, then I upgrade "SQL Server Express 2005" to "SQL Server Express 2008 SP2". Process upgrading SQL Server Express 2008 was going succesfully (none of the process was fail).
But when I create a New Website I could not add a new item "SQL Server Database" into my website file. Because Visual Studio always rejected any new "SQL Server Database" by giving message below (underline):
This server version is not supported. Only servers up to Microsoft SQL Server 2005 are supported.
I upgraded my vs2005 web application to vs2008, after i run the upgrade wizard,It l pop up one error which says that .net framework 2.0 is not available. I can compile the upgraded project but can not run that. I am wondering where in IIS, I can point the project to framework 3.0?
I ran the project, it had the following error,
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
Requested URL: /XX/yy.asmx
Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955
the project was upgraged to vs2008, i am not sure why it still points to v2.0. Also i looked at the project file, I already upgraded the oracle data access dll(from oracle side) to higher version, it also points to the old version.
The other issue is when i open the Solution, It prompted me to create the virtual diectory: Http://localhost/XX, I clicked yes, will the vitually directory automatically generated? If i go to the view sites/add vitual directory, if i enter VeroValueXmllister, will it automatically generate the Virtually directory? Http://localhost/XX
I need to ask this question.I registered websitespark program and I have some tools.I have Server 2008, VS 2008 etc.I want to install Server 2008 and VS 2008 but I never use them together before. What are the advantages and disadvantages and also performance? We are developing web and win applications.
View 1 RepliesWhile trying to download Visual web developer from HERE I get an error message about downloading visual C++ 2008 sp1 first. I go ahead and download it from HERE, but still no luck launching the program.Here is a pic of the error message.
[URL=http://img94.imageshack.us/i/aspneterror.png/][IMG]http://img94.imageshack.us/img94/3613/aspneterror.png[/IMG][/URL]
I am working on the migration of the server. Our new server is Windows server 2008 with IIS7.0 I have a great difficulty in browsing the pages hosted in virtual directories. I have followed the proper steps of creating a virtual directories and converting them into applications. But when i try to browsing the pages of the virtual directory, i get the 404 error. Note: The .Net Framework 4.0 is installed on the server and the web applications which i am trying to configure in the virtual directories are developed in Visual Studio 3.0. Even the http://localhost also don't work.
View 9 RepliesI have Sqlserver2008 setup. It is work in wndows Xp. But I have to Install it on Windows 7 ,during installation process it requires some patch and I am unable to get it.
View 4 RepliesI'm a complete newbie when it comes to SQL, and to be honest it frightens the hell out of me too.
I've been running a version of SQL 2008 Express for sometime, however after getting some free software off Microsoft I updated my version of Visual Studio to professional and then tried to update my Express version of SQL to 2008 R1.
I downloaded it from the MS site and proceeded to work through the pre-installation instructions, however I wasn't offered the opportunity of installing a new instance and was then advised there was nothing to upgrade on the version I had installed.
When I go into SQL management studio I can see the database I used to be able to access but can't expand it. My version of SQL is 10.0.2531.whats happening or how to work around it?
i have a simple questions. I am programming in Visual studio using vb.net. As Database i am using mysql with the .Net connector and using the membership provider. Do i need to install microsoft sql server 200X too ? (although i will not use it)
View 1 RepliesI am trying to install SQL Server 2008 R2 by installing MS WebMatrix from web[URL].After Installation the WebMatix platform I tried to install the the SQL Server 2008 R2 but there is no new installation option
on SQL Server installation Center and I have "New Installation or add features to an existing installation" and the problem is when I click on this option installer prompts me to "Browse For SQL Server 2008 R2 Installation Media" As I mentioned I download the web platform from Microsoft/WebMatrix web page and I have not any installation media!
I got this error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message:
Default Role Provider could not be found.
Source Error:
[Code]....
Source File: C:utvPlaygroundxxxweb.config Line: 44
I have OS windows 7(64 bits), Visual studio 2008 and Oracle 11g I have run "InstallAllOracleASPNETProviders.sql" who comes with the Oracle installation. When I run in debug I can run this application, but not otherwise. And in IIS manager, I can't se the Oracle provider? Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
Question on installing SQL Server 2008 reporting services.
I have Visual Studio 2008 express edition installed, with the corresponding SQL Server 2008 express edition installed. Is it practical to use SQL Server 2008 Reporting Services with the express edition, or is it just to restrictive with the express edition to be practical? Keep in mind I just need to use it with my local database connection. What type of restrictions will there be, i.e. what can I and what can't I do with express edition? What would be the more ideal setup and what would the costs generally look like?
After i finished installing visual stuido 2008 it said SQL sever 2005 express returned an unexpected value, it looks like it didn't install properly
In the folder SQL 2005 express edition there is a folder called configuration tools with has 3 applications, is this normal?
There is no other folder under SQL 2005. I tried to re-install it and the same thing happened
I am running a web application in vs-2008 on windows 2003 server.While execution of .net application, I am getting an error as"Unable to start debugging on the web server. Unable to connect to the web server. Verify that web server is running and that incoming HTTP requests are not blocked by firewall."
View 5 RepliesI am getting ready to move my 1st website to iis on WinServ 2008.
I am reading ASP.net 3.5 book and says that iis doesnt ship with .net framework 3.5 How do i find out if 3.5 is installed and if not how do i install?
When i was building my project in my local machine it was giving me the below error...."Error 1706:An installation package for the product Microsoft Visual Studio 2008 Shell(integrated mode)ENU cannot be found!!!Try the installation again using a valid copy of the installation package 'vs_shell.msi'"
View 1 RepliesI follow the instruction of installing a new feature with the application SQLManagementStudio_x86_ENU.exe and I get to a fail telling me that VS 2008 needs to be upgraded to SP1.
This I have done several times with the final message saying successfully installed yet 'About' shows only
Microsoft Visual Studio 2008