Web Forms :: Layering - Edit Controls In Design Mode?
Mar 6, 2010
Using VS 2010 Beta 2, VB, to make hidden panels visible during design time, I have the panels away from the main form and then use Javascript to position them during runtime. This works fine except that when I use a footer on the masterpage, the footer shows up at the bottom of the page as if the page is the complete length of the desing page, and not the page that is being viewed. For example, I might have a panel that is absolute positioned to be 2000px from the top. During design view, the panel is easy to see and edit, but the content page would then be a height of 2000px. Using a javacript function, I position the panel to be at 100 px from the top upon pageload. During runtime, the page is viewed normal, but if you look at the page, there is a scroll bar to the right since the page shows to be 200x height until the javascrip function postitions it correct for viewing. Using a master page, the footer then shows up after the content page, which is 2000px down. Any ideas of how to make this work without changing what I do for editing? I am sure there is a better trick to editing layers, but I haven' found it. For example in Autocad, you just make a layer (panel) visible or invisible while editing. I haven't figured out how to do that with VS.
View 4 Replies
Similar Messages:
Mar 30, 2010
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
View 4 Replies
Dec 4, 2010
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
View 5 Replies
Aug 18, 2010
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 Replies
Mar 1, 2010
I have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
View 1 Replies
Mar 19, 2010
I have some controls within panel control.
In the deisgn time they all appear 0th position on panel.
if the textbox's top is defined as 250px, in the design time also it should appear exactly at 250Px position instead it is appering at the 0px of panel.
all controls are appearing at the top of panel frame.
this problem i didn't see in vs 2003 1.1 framework, usign vs 2008 it started.
But at runtime they do appear perfect what ever the position they were suppose to.
I know for sure i may have to do some settings on the VS ide.
View 2 Replies
Apr 4, 2010
I have a Gridview that handles double clicks. On a double click, the selected row goes into Edit mode, which means in my case that edit controls (textboxes, checkboxes and dropdown lists) become visible, and display controls (labels) become invisible. On Page_Load the values in edit controls get saved. Now my question is this: how can I get out of the edit mode if I don't want to save? Can I e.g. handle Escape key? BTW, I use C#.
View 3 Replies
Feb 26, 2010
This is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 Replies
Oct 10, 2010
Even though I searched for a similar posting (and couldn't find it), I am certain that someone must have raised this question in the past.
I am relatively new to the .net world and I am using VS2010/SQL Server 2008. I can't seem to find the problem, but when I click on the "edit" button I get a postback but I get the ItemTemplate again.
[Code]....
View 3 Replies
Jul 19, 2010
How can I set a particular row into edit mode in code? Like when the Grid loads up I need the last row to be in Edit mode.
View 3 Replies
Mar 4, 2011
I'm playing around with dependency injection in a web-forms website al a Ninject and whilst I have had no problem at all getting the site running smoothly I've had a pretty big problem when viewing individual pages using design mode.
I wouldn't normally use design mode but dragging and dropping web user controls onto a design space is the easiest way by far to add them to a page.
The set-up is pretty much identical to guidelines here The error on the design page is thus:
The type "page name" requests an injection, but no kernel has been registered for the web application. ensure that your project defines a NinjectHttpApplication.
I'm using Asp.Net 4.0 with Ninject and Ninject.Web 2.2 utilizing property injection
View 1 Replies
Oct 21, 2010
I have a gridview and a template column:
<asp:TemplateField HeaderText="Active">
<EditItemTemplate>
<asp:CheckBox ID="chkbxActive" runat="server" Checked ='<%# Bind("Active") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="lblActive" runat="server" Text='<%# Bind("Active") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
The item "Active" is a bit from the database And for the RowDataBound:
Const HeavyCheckMark As Char = ChrW(&H2714)
For Each row As GridViewRow In gvProductCodes.Rows
If gvProductCodes.EditIndex = -1 Then
' Selects the text from the Label which is inside the GridView control
Dim lblActive As String = CType(row.FindControl("lblActive"), Label).Text
lblActive = lblActive.Replace("True", HeavyCheckMark)
lblActive = lblActive.Replace("False", "")
'Replaces the text in each Label control
CType(row.FindControl("lblActive"), Label).Text = lblActive
Else
Dim chkbx As CheckBox = CType(row.FindControl("chkbxActive"), CheckBox)
End If
The check mark works fine when not in edit mode. But when in edit mode, the row that is being edited works as expected. But the other rows now show True or False. I want them to have the const HeavyCheckMark in it instead.
View 3 Replies
Jan 28, 2010
I created a sample gridview. However, when I clicked edit mode in one of selected row, it will run away. I need to use the mouse scroll up and down to find that row. As well, once finished the edit (clicked update button), it will run away again. I also need to find the editted row by using the mouse. How do I fix the position?
Furthermore, I also want to fix the header. If I scroll down, the header row will be on the top where ever I scroll to.
View 4 Replies
May 4, 2010
I need to display data somewhat like this:
Student Name: John
Exam Grade
MidTerm1 A
MidTerm2 B
For this, I defined a class 'Student' that has the properties StudentName[String] and Exams [a list of ExamGrade objects which has the Exam and Grade properties]. And I am using nested listviews to display the data. Here is the markup for the ListViews:
[Code]....
And the StudentInfo class looks like this:
[Code]....
And Exam class has just two properties.
Now the issue is that I have to press the Edit button [link button] twicw to get the EditItemTemplate. Even then I would get the blank textboxes. So what should I do to make the EditItemTemplate appear on the first click and the TextBoxes to appear with the existing data?
View 3 Replies
Mar 10, 2010
I've got a DatalList control on a page that I intend on using for Editing Items. I've added a button control into the Item Template with CommandName="Edit", and when click the button on the item, the page Posts Back and continues to display the ItemTemplate for that item.
Here's what I've got...
[Code]....
View 4 Replies
Apr 10, 2010
Edit mode does not run all the times I have a gridview with custom edit (I have my own textboxes placed in the EditItemTemplate for updating). When the user clicks the Edit button, the gridview goes into edit mode with no problem. In RowDataBound handler, I have the following code which checks if the edit mode is in process then an additional function will be called.
[Code]....
The problem is, I noticed that RowState and function are NOT called every time the GridView goes into edit mode but it goes every other line!!! For simplicity, I have blocked the function and put direct code. I have also tried the Edit functionality provided by the GridView, and surprisingly, it is NOT working!! Notice that in both ways, the gridview is displayed in Edit mode and it does display the
Update Cancel buttons in my second try. It is working fine in all alternate rows! I hope it is clear.
View 5 Replies
Aug 16, 2010
My gridview was working just fine until I converted the Officer Report collum to a templatefield so I could have a multiline text box. Now when I go into edit mode and press update, it doesn't update. I don't know what I am missing here?
[Code]....
Here is the datasource information.
[Code]....
View 5 Replies
Jun 9, 2010
I have a dynamically built gridview in which every row in editing mode has 2 dropDownLists, i set autoPostBack property of first list to true in order to change the other list values according to the first, but upon postBack, the gridview is not in edit mode any more.
View 7 Replies
Apr 28, 2010
I have GV with custom edit box. In the GV, I have a button to select the record for editing and another button to navigate to another screen. I was able to disable the button that navigates to the other screen in both normal and edit mode.
Now, I would like to disable all other buttons that remains visible for the other records list to prevent the user from editing other records while in edit mode.
I think my problem is because I am trying to disable a button that is not visible?
View 11 Replies
Mar 6, 2011
how i add DropDownList in edit mode of DataGridView by DataSet through code not visible?
As we know that by default Every Column in Edit mode is a TextBox I want to replace this to DropDownList through code.
View 3 Replies
Oct 21, 2010
I'm trying execute code only when FormView is in Edit mode ---but the code following line this is being executed even in read-only mode.
If formname.CurrentMode
= FormViewMode.Edit
Then
View 5 Replies
Jan 14, 2011
there are 2 pages (SummaryGridviewPage.aspx and FormviewPage.aspx) there are insert, item and update templates in the FormviewPage 1st case - there is no problem to insert new record, select and update action in the FormviewPage
2nd case - However, there is problem when i select a record in GV and direct to FormviewPage for edit this code is added in Formviewpage to open the record at readonly mode, no problem
Private Sub RF_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Session("RecordID") <> "" Then ' to check New or Old record
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.ChangeMode(FormViewMode.ReadOnly)
End If
End Sub
however, no record if go further from readonly to edit mode then Code is added to the Edit button
Protected Sub BtnEdit_Click(ByVal sender As Object, ByVal e As EventArgs)
FormViewProject.ChangeMode(FormViewMode.Edit)
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.DataBind()
End Sub
Now edit problem is solved but when go back to the 1st case (new record, and then edit) Now new record can be inserted, and then show it in readonly mode. but then try to go to edit mode, no record show i think BtnEdit_Click code is conflicted with the built-in "Edit" command Could anyone show me some info how formview retrieve specific record in a proper way?
View 1 Replies
Feb 2, 2010
I have a webform with two gridviews; a textbox for the invoice number, and a button to kick everything into action. I programmatically handle the select statements in the VB.Net file because I need to iterate through the second gridview's table to perform calculations and then put those results into the first gridview's table. Then I bind them. It works just fine.
The first gridview has one row with the payment information. The second gridview has multiple rows with the items that the payment is handling.Now I need to handle the edit, update and cancel functionality. I tried using a sqlDataSource for edit, update and cancel because it is simple, but it requires a Select statement so I guess that idea is not going to happen. I put a commandField with showeditfield=true, but clicking edit gives an error that rowEdit isn't handled. I have put that sub gvInvoice_RowEditing in there, but being new at this I have no idea what to put into that sub.
I can programmatically create all that functionality in the code behind. Won't it be quicker and easier if I write sub's for Edit, Update and Cancel that tell the gridview what to do - trick it to automatically handle all that? Is there an example available demonstrating how to tell the gridview to go into edit mode and proceed as if it was using a sqlDataSource?As a final note: perhaps it would be simpler if I create a third gridview to handle the job of totaling all the cash and listing each check seperately.Here is my code. It probably isn't the most elegant approach, but it works.
[Code]....
View 1 Replies
Feb 2, 2010
I have a gridview placed on the Panel(Scrollbars set to Both).
If I click on Edit button of the gridview for example Row number 100 then the focus of the page goes to the top of page and I always scroll down to the particular record to make changes.
View 9 Replies
Oct 13, 2010
I have a grid view. When I click edit, the OnRowCommand fires and the row goes into edit state. Label becomes a TextBox. I then attempt to alter this value in some way and click update. This again fires the OnRowCommand event. The problem is, when I attempt to capture the new value, it instead just shows the original value.In my grid view I have:
<asp:TemplateField
HeaderText="Start Name">
<ItemTemplate>
<asp:Label
ID="lblStartName"
runat="server"
Text='<%#Bind("StartName")%>'></asp:Label>
</ItemTemplate>
<EditItemTemplate>
<asp:TextBox
ID="txtStartName"
runat="server"
Text='<%#Bind("StartName") %>'></asp:TextBox>
</EditItemTemplate>
</asp:TemplateField>
In my code behinde i have
TextBox
textBox = (TextBox)row.Cells[4].FindControl("txtStartName");
View 4 Replies
