Web Forms :: Loading A Different Control Over An Existing Control?
Mar 16, 2010
How would i go about loading a different control over an existing control?
By this i mean when i visit a page, a control is loaded into a PlaceHolder or Panel control, and then after i am finished with that UserControl, i want to clear it out and then load the next control in its place.
I have tried doing PlaceHolder.Controls.Clear but it still retains the first control and doesnt even add the next control to it at all.
The initial control is a data-entry control (Insert/Edit). Once the user does the data-entry (Insert for this question) needed, they click the Insert button, the data gets inserted into the database correctly then i want to pass control back to the parent page and have it load the next data-entry usercontrol in the place of the initial usercontrol.
I have tried doing it dynamically, with one placeholder control but that didnt seem to work. I tried doing it via a MultiView control with each of the data-entry usercontrols needed being pre-loaded into their own view and i couldnt get the Mutli-View to change activeindex.
Current Implementation:
[Code]....
[Code]....
Former Implementation:
[Code]....
[Code]....
View 2 Replies
Similar Messages:
Feb 2, 2011
the below code retrieves data from the db and loads the checkboxlist control.
ie.
cbl.DataSource = GenerateCBL();
cbl.DataTextField = "Des";
cbl.DataValueField = "Code";
cbl.DataBind();
How should I load another control ie. dropdownlist next to each checkbox item?
View 5 Replies
Feb 3, 2014
I am using a repeater control and i want to use one more repeater control inside the existing repeater control .
Like this:
<asp:Repeater ID="Repeater1" runat="server"> <HeaderTemplate> </HeaderTemplate>
<ItemTemplate>
<!-- start child repeater --> Here I want to use one repater control <!-- end child repeater -->
</ItemTemplate>
</asp:Repeater>
View 1 Replies
Jan 6, 2011
If I have an HtmlTextWriter with some content in it, is it possible to append the output of ontrol.RenderControl to the existing content of the HtmlTextWriter directly?
Or do I always have to output to a separate HtmlTextWriter/StringWriter/StringBuilder and then append the StringBuilder?
View 1 Replies
Sep 13, 2010
I have a requirement to display a user control on my aspx page that accepts a URL as a property, and loads that URL in the aspx page (similar to the Page Viewer web part in SharePoint).
View 3 Replies
Jan 19, 2011
i have a BaseMasterUserControl.ascx and i have create a another ChildUserControl1.ascx
and ChildUserControl2.ascx, both are inherit from a BaseMasterUserControl.ascx.
i have hosted the BaseMasterUserControl.ascx in an aspx page. At runtime i am deciding
which usercontrol should be load. so i am loading a specific usercontrol dynamically and
assigning it to baseusecontrol but content are not visual, is this possible?
Code:
[code]....
View 2 Replies
Feb 1, 2010
i need to load data into literal control which is coming from wcf service.
The data which i get is may be of a simple string are may be a html page in the form of string.
what ever the service returns the string i should load that into the literal control.
I am able to load html page which is physically present on the local path to the literal.
I need to load the same thing coming from wcf service
View 3 Replies
Sep 7, 2010
Am using asp.net 2.0 .i am having a windows control library.dll in my webform ,but it is not loading correctly.i have attached the code below.
<form
id="form1"
runat="server">
<object
classid="http:controllibrary.dll#controllibrary.UserControl1"
id=
"myid"
height="450"
width="800"
VIEWASTEXT>
</object>
</form>
View 3 Replies
Jul 28, 2010
so I have this custom user control, just some data inside divs with a fancy css.
So inside my page I need to add it multiple times, and I do so in code behind within loop.
Now, this code doesn't work
[Code]....
and of course it works fine now. My questions would be - why? can I do it without pecifying file name and just creating control the normal way like in first example?:S
View 2 Replies
Jun 21, 2010
I load a file using the FileUpload Control but it say I don't have a file? Please my code what am I doing wrong. Am I forgetting something.
[Code]....
View 9 Replies
Dec 16, 2010
I can't figure out how to get the legend to populate all the "strReason" and get the correct percents to show for each column. This is where I'm at right now.
[Code]....
View 1 Replies
May 5, 2010
i have a page it contains a User Control. in it we have a Button "View Tree" it will open a pop up window (contins a tree view).when we select any node in the tree the Corresponding item will be Loaded in the User Control and Close the Popup.i want to achive this With out re loading the total page. i am using VS 2008.
View 1 Replies
Jun 5, 2010
I have usercontrols which are loading at runtime in my aspx... (This part is working fine).
Now i need to invoke the methods of the user control which has been loaded..
How to invoke those methods??
like if i have 3 methods in usercontrol which is loaded at runtime:
[Code]....
Now how to invoke these methods at runtime?
View 11 Replies
May 10, 2010
I have a .net Chart Control working beautifully in IE, but when I test it in Firefox, the chart initially does not show up. I do a shift+reload and it then does show up (?)
1) I have the .net Chart Control set to run in memory in the web.config:
<add key="ChartImageHandler" value=storage=memory; deleteAfterServicing=true;"/>
2) I also have the pages set to HttpCacheability.NoCache.
View 4 Replies
Dec 23, 2010
Bringing back to life an old post that I dont believe ever got solved: http://forums.asp.net/t/1562245.aspxThis may be an old thread .... but no answer was ever given ... and I too have a radio button list and DDL and am stuck in the EXACT same place. If I check one of the two data bound radio buttons, the DDL should repopulate with a different set of results. This works just fine EXCEPT .... the DDL cannot be databound. If I set SELECTEDVALUE of the control to a bind I get this error:Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.I have followed the advice on this page from various users, all to no avail....surely this can be done, and I assume quite simply. Anyone know the answer?
[Code]....
View 3 Replies
Mar 11, 2010
I've got an existing asp.net project written in vb.net. Another person has written a user control in c#.
the steps for adding that C# user control to the vb.net app?
I've tried copying them to the folder and using "Add existing item", however it doesn't compile the code behind at all.
View 3 Replies
Jan 26, 2011
I am creating a custom control and had a thought before I began. My control relies on the jQuery library to work. What if the user already has a version of the library already on their page. Will this effect anything? If my version is newer / older and my control will only work with that version of the libaray, what should I do?
View 1 Replies
Apr 6, 2010
I have FileUpload Control; I need to remove the file content from the control once the operation is done. I am trying to dispose the Filecontrol object but no luck.
FileUpload1.FileContent.Dispose();
View 7 Replies
Feb 5, 2011
we have a web site (Web Site 1) which is presently working and authenticates the users using ASP.Net login control.
We have a new site (Web Site 2) which will have a web page with user name and password fields and these values will be posted to Web Site 1. I am trying to authenticate those user credentials on Web Site1 using
Membership.ValidateUser(UserName, Password); method. but i am keep getting "User AuthenticatedObject reference not set to an instance of an object. " exception.
View 4 Replies
Nov 19, 2010
We are using VS Ultimate. One developer has created a solution (xyz) which is displayed in Team Explorer and Source Control Explorer. I want to create a local Solution using his existing Solution. How can I do this? I started with File/New Project. I gave it a name and it now displays in Solution Explorer as 'Solution 'xyz_solution' (0 Projects). Already existing in Source Control is a folder named 'xyz Solution'. I want to populate my solution with this?
View 1 Replies
Jan 21, 2010
iam into problem of reading the value of the control which i alterd using javascript the sequence goes like this i got the text box control by using its id ,cleared the value of the text box,make the control disabled.when i tried to retrive the value of the textbox in aspx.cs.iam still getting the old value of the text box which i actualy cleared in the javascript
View 2 Replies
Jun 3, 2010
i created a user control called userCon.asxc. may i know how do i do when i click on button1, then the userCon.asxc will load into panel1?
I checked on internet, but found only those loading the user control to page when execute. What i want is to load user control into panel1 when button1 is click. .
View 3 Replies
Mar 23, 2010
I have a Repeater control that loads instances of a custom control I have built. This repeater looks like this:
<asp:Repeater ID="myRepeater" runat="server" OnLoad="myRepeater_Load">
<HeaderTemplate>
<table border="0" cellpadding="0" cellspacing="0">
</HeaderTemplate>
<ItemTemplate>
<tr><td><my:CustomControl ID="myControl" runat="server"
OnLoad="myControl_Load" />
</td></tr>
</ItemTemplate>
<FooterTemplate>
</table>
</FooterTemplate>
</asp:Repeater>
I bind to the Repeater through the myRepeater_Load event handler. My custom control is used to render an item within the Repeater. Because of this, I am trying to set properties on the custom control during the myControl_Load event handler. However, I do not know how to access the current item during the myControl_Load event.
Is there a way I can pass along the current item or access the current item during the myControl_Load event? If so, how?
View 3 Replies
Jan 15, 2010
System.Reflection.Assembly assembly = System.Reflection.Assembly.LoadFile(@"CustomControls.Nav.dll");
//Namespace and assembly name are CustomControls.Nav , the class name for the control is WebBar
Type type = assembly.GetType("CustomControls.Nav.WebBar");
I am getting type as null.What am I doing wrong here?
View 1 Replies
Jan 6, 2010
I encounter a problem...error is Ajaxcontroltoolkit.dll is in bin folder, but still I get this follwoing error.Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The module was expected to contain an assembly manifest.My code is (in .aspx file):
[code]...
View 1 Replies
