I have at present two master pages, what I want to achieve is the following; One user control loads, there is a button to click, when user clicks that button the user control should unload upon session authentication and the second one loads. However, the second one has a button as well, and I want to click on that button to unload that control from master page and reload the first user control.
View 3 Replies
I am new to asp development but have been around c# for a while. Basically I am trying to create a page which will pull data from a database and then for each object it creates I would like to add a user control which is built to represent that object. So basically I have tried quite a number of things to get it to work but for some reason I can't figure it out! How can I programmably add user controls and then set their properties from a 'master' page which hosts the user controls?
View 3 RepliesI have user control which is attached to one master page in one of the content placeholers ,but when I create the content pages ,I cannot see the user control,that's why I manually write in every content page
<%@
Register
src="~/usc_navigation.ascx"
tagname="usc_navigation"
tagprefix="uc1"
%>
My question is.. Can I type
<%
@
Register
src="~/usc_navigation.ascx"
tagname="usc_navigation"
tagprefix="uc1" %>
only in the master page and all the webforms to load the control automatically
i tried the following:
<%@ Register Src="~/controls/global/mainMenu.ascx" TagName="ctrlMainMenu" TagPrefix="global" %>
<asp:ContentPlaceHolder id="LeftContent" runat="server">
URL.... Still there will be need of url in ajax method if i put javascript in site.master.cs . As what i have understood from that mysite.master.cs will be like this :
protected void Page_Load(object sender, EventArgs e) {
try {
if (Session["Prefix"].ToString().Trim() == "sys_admin") {
UserNameMasterLabel.Text = Session["UserName"].ToString().Trim() + " (ADMIN)";
[code]....
And site.master will be like this :
And I have to put next method in DailyLog.aspx page ? like this
System.Web.Services.WebMethod(EnableSession = true)]
public static int RefreshSession() {
HttpContext.Current.Session["Name"] = "BSD";
Configuration config = WebConfigurationManager.OpenWebConfiguration("~/Web.Config");
SessionStateSection section = (SessionStateSection)config.GetSection("system.web/sessionState");
int timeout = (int)section.Timeout.TotalMinutes * 1000 * 60;
return timeout;
}
But I have several pages in my website , by doing the above story will it work for Builder.aspx ? or any other page rather than dailylog.aspx ?
I have a user control in my Master page and need to be able to Enable/Disable it from ANY page. How is this done? My user control has a few TextBox fields and a button. I was hoping to set a public property and simply Enable/Disable, but public properties seem to only work on the Master page code behind and not other pages.
View 4 RepliesI am trying to catch an event that is in a user control inside a master page contentholder and refresh the content page. I am having a hard time finding a good example. Even on this site I am timing out on search.
View 3 RepliesOn MasterPage i have function below, how call this function on test.ascx form on button click.
public void HideBtnLogin() { string session = Session["userCode"] as string; if (String.IsNullOrEmpty(session)) {
lbtnSignInTop.Visible = true; lbtnSignUp.Visible = true;
}
else { lbtnSignInTop.Visible = false; lbtnSignUp.Visible = false; } }
On page load is there a way to enumerate all the nest user controls for that specific page load?
I'd like to be able to enumerate all the user controls that implement an interface, and call the interface method for the controls before asp.net passes control to thier page_load events.
The problem is from the master page level, any page in the app could be loading, and each of them could have any random user control, and I need the type reference to determine if they implement the interface, and to call the method.
I have a ShoppingCart UserControl on MasterPage. I have a following functionality: User adds item to the cart. after clicking the button "Complete Sale" in UserControl the page is redirected to "CustomerInfo.aspx" and after filling the Customer information and clicking on submit which is on CustomerInfo.aspx page i want to call the "Complete Sale" click event of UserControl from "Customerinfo.aspx" page.
Customerinfo.aspx.cs
protectedvoid btnSubmit_Click(object sender, EventArgs e)
{
try
{
bool val = false; int retVal = 0;
CustomerBiz objCust = newCustomerBiz();
objCust.FirstName = txtFirstName.Text.Trim();
[code].....
Here the Button text changes in UserControl. But i am not able to call the Click event of this button from CustomerInfo.aspx (ContentPage)?
On masterPage i have button btnTest, how hide button from masterPage on userControl.ascx
example:
btnSecondPage_click
{
btnTest.visible = false;
}
i have one method in master page and a label in same master page, and their is one method which changes text in label, and i want to call the same method in Master page from my Usercontrol.
View 1 RepliesI am tring to send form values to a page from a user control. I included the user control in a master page.When i use page.previouspage it can not get value. is there any way to send form data to a page from a user control included in a master page?
View 5 RepliesI have a user control in the master of my website and I want change some property of that control from the content page.
View 3 RepliesI have a master page containing menu items and if i click on any menu item then postback happens(it's not an asynchronous postback) that page loads in the content area. Now, if the page has taken some time to load and the user again clicks some other menu, then at some cases, it is crashing. So what i want to do is when postback is happening, I want to restrict the user to click anywhere on the master page or content page. We have achieved this on asynchronous postback.... But cant find a solution during postback.
View 6 RepliesI have user control in the master page. user control code behind page having public property called SetValue.
Now I want to set the value from content page .
There need to read selected value from drop down list which is in user control (user control is placed in master page) in contect page.
View 1 RepliesI want to search my asp.net pages and user controls to see which master page and base class they use. I mention search because we are re-factoring a large project and we need to track progress on the code conversion. I know I can pull this information individually but I need a automated and repeatable procedure.
View 1 RepliesI've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?
I have a LoginView in my Master page:
[Code]....
I need to get the user ID from LoginName to use in my page's code behind:
[Code]....
But userID is null as it is not found in the master page. Could you suggest something to get the user ID?
Is there a good way to enable forms that come out of user content (CMS) that is displayed inside the form runat="server" tag? All sorts of services provide forms for users to paste into their website, which break if the content ends up inside a .net form. It seems to me that there must be a good way around this, but I can't seem to find any solutions.
View 1 RepliesI have looked everywhere for how to do this and all I come up with is threads describing how to expose public properties. I have a USER CONTROL in my Master page. It is a search box with a text box and a dropdown for search type (last name, account number, etc) and a search button. When the user clicks the search button, I open a new page that displays the results. How do I pass the values from the USER CONTROL search fields to the new page? I would post code, but I have nothing to post yet since I don't know where to start. I have tried exposing the public property of the user control, but I don't know how to retrieve those values on the results page.
View 7 RepliesWhen I use a Master Page with a Content Page, in the Content Page script I find that User object is defined, with Identity and IsInRole properties. However, when I enter script on the Master Page itself User comes up as "not declared".
I am guessing that User is embedded in some namespace that is automatically imported to Content pages, but haven't been able to track it down.
Normally I dont have the login link in the master page. But I have the labels to display the user information on top of master page once logged in and have the sign in option in content page which contains that master page. After sign in , i want to display the user information on the top of the master page without redirecting user to the same page? How can we do this?
View 5 RepliesI want to share a common page load and page init events sequence between Master page and child page and User Control as described below:
Let us have the following components:-
1. TestMaster.master -> It is the master page
2. TestChild.aspx -> It is the Child page
3. TestUserContrl.ascx -> It is the UserControl present within the TestMaster.master page.
[code]...
