my problem i have defined style sheet for menu and built a user control which was placed in Control folder, but images are not displayed in the menu when the run the product/sart.aspx, but they appear in Default.aspx
I have created a .NET 3.5 # web app. It has a master page, a homepage, and an Accounts folder with Login.aspx, Register.aspx etc.When I run the app Login.aspx displays but it doesn't display the Image from the Images folder, it doesn't inherit the MasterPage/CSS and when I click on the Register link it stays to the login page .I understand that this is probably down to permissions. Do I have to put a web.config file in each of the Folders or do I update the main web.config and add location elements to allow access.
I have looked at a .NET4 example and the web.config is in the Accounts folder - however this isn't working on my 3.5 example.Any links to complete ASP.NET 3.5 login, register web app examples would be great?!
I have a web site application using FW 3.5 and I have the following problem: In one of my forms when I click a listview an image control displays the image that corresponds to a directory, something like this:
Is this the only way? I have tried this with a couple of photos, but I cant put them all in C: drive (where the wwroot is located) because there is no space available, I really need to read those images from the D: drive.
I have a web user control that represents a simple message box. It is used to display simple messages like "Item has been deleted", or "The item was saved successfully".
On the other hand, I have another web user control that represents the item in the form of an editable form (I made this a user control because this is used in two different pages). I want to embed an instance of the message box user control inside the editable form. I am writing this right after the @Control directive:
[Code]....
Instead of using @Register directives, I register the user controls in web.config and so far this has worked just fine.
With the above markup, the project compiles, but whenever I try to navigate to a page that contains this construct, I get an HttpParseException exception. Furthermore, Visual Studio states that the tack w7rc9:MessageBox doesn't represent a known control.
i want to display the image either from a database or through file upload control but in case of database i had seen your article but what binary data i can store as you had in data column table and when i save a file somewhere through file upload but it is not displaying the image.
I have two columns in database name of the image(varchar) and image(BLOB) and i have inserted images into database.now i need to display on grid-view control. am banging my head since one day by searching and i have used handler but no use.
how to upload images to server(application/images folder) and retrive(display) from and on client PC for asp.net. its just for uplaoding logo directly to server folder and retriving from server to client. i am not getting server path on client pc for image.
I have a dynamically created address user control (on a customer administration screen) that is created through the use of a place holder. A customer can have multiple addresses, so they dynamically dropped onto the page.
I have got this far, but now I need to be able to save the updated addresses for the customer but I can't get any event to fire on the user controls. When I check to see run plhAddress.HasControls() it returns false?
The way I am generating the user controls is as follows.. private UserControl LoadControl(string UserControlPath, params object[] constructorParameters)
I want to create a product sale page. The sale page will have images of products generated from sql server database with their price and name. When a user clicks on a specific image, it should navigate to another page with more images and details of that particular product. I just dunno which control to use to display images on the sale page. Also the admin can add products with images, therfore when they add new product , that product should come the first on the sale page. I can acheive that just by writing a simple query , but i dont know what should i use to display images. I cant use image buttons coz the images can be more than 50 depends, nor i can use grid view for images. I am using asp.net and sql server 2008.
I want to know that how to dispay the all images from the folder available on ftp to the web page.
Ex :
There are 5 folder are available on FTP site. If I want to access the folder A with all images. How it it possible ? The Image should display on slider.
My application stores images in a particular directory, and I would like to display these images (in rows and columns) on a webform, with the "Remove" link on each of them in order to delete some of them if necessary.
Are there any links that may point me to the right direction? Most of the links I found dealt with displaying images that came from a string stored in a table.
I need rft server control not HTML based server controls to display and store text as well as images, from which i can get rtf text and can save it as it is in DB.
I am displaying Event dates from SQL table on Calendar Control in ASP.NET. Also, I have GridView Control which shows event details when certain date is clicked on calendar control. But I have a problem as not all dates are displaying properly.
Strangly enough only dates which have same month and day date are displayed. For example:
It shows ok dates such as 08/08/2010, 09/09/2010, 10/10/2010 etc. If I click on the date which in SQL table exists as 11/25/2010 or 12/15/2010 etc (no matching month/day numbers) it shows error message saying: "System.Data.SqlClient.SqlException: Conversion failed when converting date and/or time from character string."
Follwoing is my code:
[Code]....
I would like to make sure all events are showed properly in grid view.
I wish to access a user control's public property from another user control. But, I am not able to access one user control within another. Even after using the namespace 'ASP', I am only able to see the reference to the current user control. However, in a page I am able to refer to all the user controls with the ASP namespace. Am I missing something or it needs to be that way?
Update:
Here the exact scenario - I have two user controls A and B. Now both of them are being used on a Page Default.aspx. There is a public proprty on control A which holds the name of the control clicked within A. I wish to access this property in control B to make some decisions. With the suggestions gioven by you, I understand reaching to the control by FindControl method of the container page, but how do I cast it to control A to fetch the property value when I cannot get the reference of the control A in B?
I'm using Microsoft's PivotViewer control in one of my Silverlight projects. I'm creating a JIT collection and was hoping to dynamically generate the images based on the rendered result of a WPF UserControl. In order to generate the images I'm using an HTTP Handler to serve the images up dynamically.
how I might best go about this. It's all quite a mashup of technologies and a bit difficult to know where best to begin.
EDIT: I have found a guy that's done this in ASP.Net MVC here -
There are two user controls, which are built dynamically.
In the first control, I am adding a link button, and trying to attach a click event on the same. But the event is not fired.
Actually the main goal is, when the link is clicked, based on which one is clicked, I need to show second control (the values on the new controls are based on the first controls link button that is clicked).
If I use javascript, I will need to use ActiveX or is there any other way to instantiate the second control using javascript
I'm building a user control to display detail information on a parent record. The user control will be displayed via an Ajax Modal Popup. The user control works and is displayed when expected. The problem that I'm having is that I'm not able to pass in the primary key for the parent. The control is displayed via the _ItemCommand event of a Repeater. In the markup for the user control, I explicity set the ContactId to 0 to avoid an error when the control loads (its still underdevelopment, eventually that I'll check if the value is valid).
I was assuming that I could change the property in the _ItemCommand event, but obviously its not working.In the Page_Load event this code successfully sets the ContactId property of the control. The _ItemCommand event appears to set the value. However when I set a test label on the user control to the Me.ContactId, its showing '0' as if it was never passed in.
I have the windows form user control with the name usercontrol.cs .. I want to display this usercontrol.cs in aspx page..I tried the below code..but it produced error.. how to resolve my proplem...thx
Control MyUserControl; MyUserControl = LoadControl("usercontrol.cs"); MyPlaceHolder.Controls.Add(MyUserControl);
2. loading these data in a datatable using Linq to XML
3. binding the datatable in a gridview
twitter APIs includes URI images, and also strings that includes <a href> tags (i.e. hello world <a href="asp.net">asp.net</a> hi again)
the problem is that i'm not able to load these uri images in the gridview neither the hyperlinks instead i'm dipslaying the uri of the image and the tag itself
I have created a user control and am ready to convert it into a custom control. I am trying to follow:
[URL] the steps mentioned in the link.
I am not seeing Build / Publish Web Site option.
I am using VS 2008. I only see Publish User Control but it doesn't give all the settings mentioned below. When I do publish user control, it just copies the ascx file to the desired location. how can I convert the user control to custom control.
I have a master page that holds the loginview content that appears on all subsequent pages based on the master page. i have a username control also nested in the loginview to display the name of the user when they are logged in. the code for the loginview from the master page is displayed as follows:
[Code]....
My authentication works perfectly and the page gets redirected to the designated destination. However, the login view does not display the users name. i actually cant figure out how to pass the users name that i had picked from the database to the login name control to be displayed.
taking a close look i also noticed the logout text that should be displayed after successful log in does not show. that leaves me wondering if the loggedin template control on the masterpage even fires at all or its still the anonymous template control that keeps displaying.?
I have a user control that's got an image ..when I added it to a page that doesn't have a Master Page..the image was getting displayed alright but when I added the same user control to a page with a Master Page.the image vanished!....When I checked the Page source the image's path was there like this. style = "background-image: [url] Image exists too! not that its gotten deleted or whatever.
Now idk where I read this but I did somewhere that when master page's added and user control's used..the ID s get changed or something..not sure..idk..if that's so..how on earth do IDs get changed and why and of what ? I just can't figure out what might have gone wrong..How do I test it?
[EDIT]
I checked the Page Source minutely again and guess what some div tag IDs have changed! ..I got this one div who's ID is "div1"..inside of this div is my Sprite image..now this "div1" is being changed to
Banner is variable of type UserControl declared in my test page(I am adding UserControl in code behind)...some more Div's IDs are being changed in a similar way...now what do I do about these changing IDs?