It doesn't seem that the Html.CheckBoxFor helper adds the correct "checked" attribute when rendering the HTML. I have a bool property rendered like so:
<%= Html.CheckBoxFor(m => m.Visible) %>
And the outputted HTML is this:
<input type="checkbox" value="true" name="Visible" id="Visible">
Is there some particular reason it does not add the "checked" attribute when the value is true?
In keeping with the SEO friendly nature of MVC, shouldn't there be a way to designate the 'title' attribute when building an ActionLink?
View 6 RepliesWe have just updated our application from ASP.Net 2.0 to ASP.Net 4.0.We have included in the web.config in the system.web element:
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" />
My understanding is that this is supposed to render the controls the same as .Net 2.0/3.5 would.However.
I have a grid/table that is pretty big in width. The AutoCompleteExtender is outside the right side of the page and the user needs to scroll to view it. When you scroll over and start using it, the drop down list with the values are displayed back to the left in the original viewable portion of the page.
View 1 RepliesI couldnt test the page in Safari, dont have a way to get around the cert error since its our dev server. Either way the page looks like crap on everything but IE.
I have 3 small tables on a page.. small as in 4 rows and 3 columns when viewed in the 3 browsers, the columns seem to push over to the left and fall under the first.. so when you view the page what should be 4 rows and 3 columns now looks like 7 rows.. that only way i can explain it.
I have an html checkbox that controls a list of checkboxes. I want this checkbox to display in a sorta "null" state where it is neither true nor false.
<HeaderTemplate>
<div style="width:90px">
Toggle:
<input id="chkAll"
onclick="javascript:SelectAllCheckboxes(this);"
runat="server" type="checkbox" />
</div>
</HeaderTemplate>
I have House_info table in database that have Pay column
I have one checkbox in admin.aspx page that I bind it from database
I want if there was data in pay column checkbox.cheked=true else checkbox.cheked=false
so in behind code I wrote below code
SqlCommand _cmd = new SqlCommand("ViewSreg", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
SqlDataReader _dr = _cmd.ExecuteReader();
while (_dr.Read())
[Code] ....
But in both condition if there was data in Pay column Or there wasn't any data in Pay column it checked checkbox. I mean in both condition it is CHKV.cheked=true
I am still studying to become a webintegrator and this is my private project to try and learn C# better.
I have a database with a table called Answers which holds AnswerID, Answer1, Answer2, Answer3 and CorrectAnswer + a table called Questions which holds QuestionID, QuestionNumber and QuestionText.
On a page i have a repeater that pulls the questions from the database and inside it i have another repeater with my 3 radiobuttons that pulls the 3 Answers from the database and are grouped so you can only check 1 of the radiobuttons as the user. See below:
<asp:Repeater ID="rptQuestions" runat="server">
<ItemTemplate>
<div>
<div>
Spørgsmål
<asp:Label ID="lblQuestionHeader" runat="server" Text='<%#Eval("QuestionNumber") %>'></asp:Label>
[Code]...
What i need to do, is somehow find each CorrectAnswer checked correctly in the repeater holding the radiobuttons and give 1 point for each CorrectAnswer chosen by the user (if theres 10 questions there will be 10 repeateritems with 3 radiobuttons in each one) and write this into aspnet_Profile. Problem is i have no idea how to do this since it already seems a bit complicated in my head and i haven't had much C# yet. So any help would do and notice i do not ask for the entire coding but simply a push in the right direction.
I've been tryin to find an example of the syntax for getting an html 'title' for a string when using Html.Encode(). I want to display the full name in the mouseover title, if it's too long.
Is there a way to do this without wrapping the string in a < span >, i.e.
<span title = "<%=Html.Encode(model.Name) %>"> //displays the full name on mouseover
<%=Html.Encode(model.Name.Substring(0, 10))%>... //displays the name up to a max length
</span>
Or should I just do it this way?
Having a really strange issue at the moment with an ASP.NET site I'm currently building. At the moment, I'm writting the HTML and CSS for a page called Dashboard.aspx. But when I go to view the page in a browser, half the time it throws up this error: ASPNET: Make sure that the class defined in this code file matches the 'inherits' attribute, and that it extends the correct base class (e.g. Page or UserControl). I've checked the Inherits attribute on the .aspx page, and it matches the Partial Class held in the VB code of Dashboard.aspx.vb file.
When I refresh, it will always come up with this error. Then after a minute or two, it will load fine with no problems. I had a quick look on Google and I couldn't find an answer to this issue. I have also changed the name of the partial class (and the content placeholder on the .aspx file, thinking that may have caused a conflict) and nothing I do seems to fix it. Could anyone shed any light on what's going on?
I have the following line of code in an MVC2 project but I cant get it to render the HTML from the database, all I that is displayed is the HTML.
<%: (Model.Blog.BlogDetail)%>
I cannot seem to get over this problem. Im sure it is just a simple newbie question but I just cannot find the right answer on my own.
Im using MVC 2 and ASP. NET 4.0 to biuld simple CMS. Im storing encoded HTML in XML file which then i am passing to front page controller for display.
I understand that before inserting HTML from XML into the page, it should be decoded using HttpUtility.Decode() function.
[Code]....
I expected that this sould result in inserting decoded HTML into my index.aspx page. Then browser could render my decoded content for example in bold face.
What happens is quite awkward. In page source I have encoded HTML but it renders HTML with tags. For example I see "<strong> Lorem ipsum </stong>", instead of Lorem Ipsum.
I find it hard when using asp.net controls, to make proper css files because I don't know what the html output for the different controls end up as. For example, if I want to add a div tag using a asp.net control, it's not easy to know what kind of control I can use.
Are there any documentation that shows for each asp.net control, what the rendered html for that control will be? I understand that some controls will probably change it's output due to how it's configured, but most controls will at least follow a pattern here.
The best would of course be a service on the web where you can put in the asp.net control definition and get the rendered html out. Currently I have to put a control into my webform, run it and check the source in the browser, and if it's not the correct html tag, try another control and repeat. That get's tedious quite fast.
I was wondering if it's possible to render an Html Helper in a View inside a codeblock. So instead of:
[code]....
And have this render. Of course as it is, it wont render, so is there a way to programically decide if a textbox can be added without having to have a million delimiters in the page to accomplish this?
I'm returning some preformtatted data from the server as a string. this is passed to the ajax results. For some reason the html is just displayed as a string rather than links etc.
this is what I want
<a href='#'>test</a>
this is what i get
<a href='#'>test</a>
This is my code
[code]....
What I am dealing with is a collection of data from 3rd party sites, some xml, some thumbnail images already.I essentially have an asp page that uses vb to collected the data and display it with some minor formating in a <div>, I use a literal control and a stringBuilder to put together the html and output it to the literal.
Here is my asp.net code
<form id="form1" runat="server">
<asp:Literal ID="Info_literal" runat="server"></asp:Literal>
</form>[code]...
So what I've been trying to do without any luck is have the output dump into a stream, then render the html into an image from that stream.I have looked at most of the links that have been posted in simular threads, and none of those are simular to exactly what I am looking for.
Can we set an id attribute as I would for something like a table column via: for an html dropdown list element that is created with a helper such as:
<% for (int i = 0; i < Model.Trx.TransactionHolidayCityCollection.Count; i++)
{%>
<%= i > 0 ? "," : "" %>
<%= DropDownData.HolidayDays().ToList().Find(item => item.Value == Model.Trx.TransactionHolidayCityCollection[i].HolidayCityID.Value.ToString()).Text %>
<%} %>
I am writing an application that renders a list of "Job" objects from an AJAX JSON response.
What is the best way to Render the markup from the returned data. Now I'm pretty convinced that its a bad idea to generate HTML markup on the server side and return that from the AJAX call. From experience it makes the HTML hard to maintain and re factoring the content is a nightmare, so I am returning a collection of Job objects as JSON.
The question, then, is how to render the HTML based on user input? I've seen some examples of having your markup template on the page then use JQuery to clone it and populate with the relevant data the insert it into the DOM.
The problem with this is that the template contains visible content (images and suchlike) and the application needs to degrade, so I have a repeater on the page that the severside code and populate on page load if JS is not available.
Objective:take string from "code-behind" writen in C# language and display it in html <p> element using ASP.NET MVC.
Code:
string xyz = "message1" + some line break character(s) + "message2";
ViewData["Messages"] = xyz;[code]..
I am working in an environment with many teams who are responsible for specific content on pages. Each team is sharing specific information (common class libraries, and master pages) that each are going deliver different types of content.Is it possible for an MVC application to do something similar to RenderPartial and pass a model to another MVC application Controller/Action to return content?
So the code for this might look like:
(http://www.mydomain.com/Home/Index)
<% Html.RenderAction("ads.mydomain.com", "Home", "Index", AdModel) %>
Maybe this is not a good idea as another thread has to spin up to server a partial view?
I have a Master.aspx and a Page1.aspx and Page2.aspx, all in the same directory.
Master:
<asp:HyperLink NavigateUrl="Page1.aspx" runat="server" Text="Page 1" />
<asp:HyperLink NavigateUrl="Page2.aspx" runat="server" Text="Page 2" />
both the Page1 and Page2 gets rendered from above master page.
all three are in a vertual directory which is mapped as a subdomain here are the details:
Virtual Drectory: dirvir
Domain: dirvir.example.com
now when I open any of the page say:
http://dirvir.example.com/Page1.aspx
the Hyperlinks are rendered containing
href="../virdir/Page1.aspx"
href="../virdir/Page2.aspx"
respectively.
On click of them it takes me to
http://dirvir.example.com/dirvir/Page1.aspx
http://dirvir.example.com/dirvir/Page2.aspx
where as I wanted it to be
http://dirvir.example.com/Page1.aspx
http://dirvir.example.com/Page2.aspx
I can achive the same by using <a> but i need them on the code behind too so thats not desired.
Note: using <a> with runat server also behaves in the same way HyperLink does.
I would like to render a simple list of - Controls.My ASP.NET Code-behind looks like:
RadioButtonList list = new RadioButtonList();
list.ID = rbl.name;
list.CssClass = rbl.cssClass;
[code]...
I am working with a pretty complicated .aspx page that is full of controls (Telerik, Ajax, etc.) that all expand, collapse, show, hide, etc. when the page is loaded. Since this rendering happens on the client-side and can take different lengths of time based on the users machine specs, is there a way to detect when all (or some) rendering has taken place (jQuery?) so I can then act on specific elements, knowing they are fully rendered?
View 5 RepliesOver the past 3 days I've been trying to do everything in MVC. I want to learn this awesome technology.
I have just faced a problem with Html.ActionLink and I can't figure it out ! Here is what I have in my Home Index View:
[Code]....
I'm using ReportViewer Control (2008) and I created a report as an invoice template.
In the invoice, I need to display the company information in multiple lines (and as many lines as the customer likes). So I use the .Net Ajax HtmlEditor for the customer to input the company information and I store these information into the database. I want to know that, how can I display these HTML content in the invoice?