We have just updated our application from ASP.Net 2.0 to ASP.Net 4.0.We have included in the web.config in the system.web element:
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" />
My understanding is that this is supposed to render the controls the same as .Net 2.0/3.5 would.However.
I have a grid/table that is pretty big in width. The AutoCompleteExtender is outside the right side of the page and the user needs to scroll to view it. When you scroll over and start using it, the drop down list with the values are displayed back to the left in the original viewable portion of the page.
View 1 RepliesIt doesn't seem that the Html.CheckBoxFor helper adds the correct "checked" attribute when rendering the HTML. I have a bool property rendered like so:
<%= Html.CheckBoxFor(m => m.Visible) %>
And the outputted HTML is this:
<input type="checkbox" value="true" name="Visible" id="Visible">
Is there some particular reason it does not add the "checked" attribute when the value is true?
I couldnt test the page in Safari, dont have a way to get around the cert error since its our dev server. Either way the page looks like crap on everything but IE.
I have 3 small tables on a page.. small as in 4 rows and 3 columns when viewed in the 3 browsers, the columns seem to push over to the left and fall under the first.. so when you view the page what should be 4 rows and 3 columns now looks like 7 rows.. that only way i can explain it.
I hate tables - don't want to use tables, unless I have tabular data to display. A menu is not tabular data (as far as I am concerned.) I was elated to see that in asp.net 4 - the menu control renders as a <ul> <li>, instead of as a table. However - try as I might, I can not get a horizontally orientated Menu to split into even columns, and text align center. FYI - I don't use fixed width - so I can't just set a width to 1000 - and separate it into even columns. Besides that, I want it to change width dynamically, based on the number of "columns (menuItems)" there are. Is it possible to spread out the <li> menu items evenly across the space I provide for them in their containing div or will I have to quite using menu controls, and start using JQuery Menu's?
View 2 Repliesam using an asyncFileUpload in a DotNetNuke project developped with VS2010. I want to set ClientIDMode to AutoID but I get an error message: "ClientIDMode is not a member of asyncFileUpload".
View 2 RepliesWhat is the default for ClientIdMode ona) Pageb) Controlc) UserControl From what I have read it is Predictable, Inherit, Inherit. I expected the default on the Page to be AutoId. Wouldn't Predictable break things?
View 1 RepliesHow should we use ClientIDMode property that comes with asp.net 4.0?... When i should i use one over the other clientIdModes?
View 1 RepliesI would like to have the brand new ClientIDMode and the ClientID property on ASP.NET 3.5 controls, there is any way I can achieve that?I was thinking in replacing the default control compiler, this is possible or there is many changes to make this behavior available?
View 1 RepliesI've been building a project for a customer in framework 4.0.What I didn't know was that he wanted the project built in fw 2.0.Now, my gridview is using a setting called ClientIDMode="Static" to setup a jQuery "tablesorter" function, which makes sorting possible using jQuery.But that settings is not available in 2.0, any ideas how to fix this? If I remove the ClientIDMode setting, the header won't be clickable and sortable.
View 2 RepliesThe event is simply not firing, what am I missing?
Code for the button:
<input type="button" class="button hide" id="savetext" style="float:right;" value="Hello" runat="server" OnServerClick="savetext_Click"/>
And the code that is generated (i.e. when opened in a browser and the source is viewed) is this:
<input onclick="__doPostBack('ctl00$Main$savetext','')" name="ctl00$Main$savetext" type="button" id="savetext" style="float:right;" class="button hide" value="Save to text" />
I've got <pages clientIDMode="Static" /> in web.config but the name and generated onclick event are prefixed despite that. Server side code:
Protected Sub savetext_Click(ByVal sender As Object, ByVal e As System.EventArgs)
End Sub
To be clear, my goal is to register a click on a button server-side, not just client-side.
I wanted to make use of AJAX 4.0 new feature of ClientIDMode.I have a dropdownList inside updatePanel. I defined a unique ID for this control and set the ClientIDMode to be static.The problem is , when I select the dropdown list, the page jumps(postbacks). However this does not happen if I remove the Static setting for CleintIDMode. I have also downloaded a new ajax 4.0 dll from the codeplex library
View 1 RepliesI have a GridView in an UpdatePanel. As long as the ClientIDMode of the GridView is
not Static, the updating behavior is what expected - any change of the GridView does not affect any area outside the UpdatePanel. As soon as the ClientIDMode of the GridView is changed to Static, the UpdatePanel behaves as if it did not exist - any of the GridView will refresh the entire page.
I am doing a workshop , it has questions, and answers with radiobuttons, I need that when a click is made on a radiobutton a message appears saying that it is correct or it is not correct, how can a do it,
View 10 RepliesI am using 3 tables and are trying to get the correct info belonging to the correct id. Like this: I go to a page and here i want to see the information from the 3 tables using a specific id.
I have written this so far in a query:
[Code]....
My problem is that the last line does not work and i am uncertain how to make this work? How to write it correctly that is.
i have tired your demo
[URL]
but this is not working change your code
<asp:TextBox ID="txtProductDate" ClientIDMode="Static" runat="server" ReadOnly = "true"></asp:TextBox>
it is always updating values to first datepicker
I have develop a web application. I have put my web application in my server and user can access from any location.
My server regional and setting is English (US). Now my problem is
1) When user access to my system and his pc setting is English (UK), it will prompt and error
and after i debug i suspect it is because of Datetime conflict (dd/MM/yyyy and MM/dd/yyyy)
2) I cannot fix or limit my user to setting his/her pc regional setting to UK
So what can i do in my web application solve this issue?
(Can i write any code in my client side (.aspx) to convert or do standardization to US)
I would like to set a value:
[code]....
...where [HERE] is the placeholder for my value, from my code behind in ASP.NET before the page is rendered. I generate a guid, and I need that apart of the script on the page.
I'm working with ASP.Net web services and am having a problem with a long-running process that takes about 5 minutes to complete, and it's timing out. To fix this, I was able to set the executionTimeout on the server's web.config to 10 minutes, and then set the .Timeout property on the Web Service object to approximately 9 minutes. Now, I'm worried that this may possibly cause some other web service calls to sit there for 10 minutes before they time out rather than the previous 90-100 seconds. I know the default on the client side is 100 seconds, but wasn't sure if updating the server's timeout setting would affect this.
Bottom line is - Is it safe to update the server's timeout setting to a long amount like 10 minutes, and rely on the default timeout on the client, or could this end up causing some problems?
I have the following code in my post action method for Edit.
JobCardService.Update(viewData.JobCard);
var js = new JavaScriptSerializer();
ViewData["Notifications"] = js.Serialize(new {NoteificationType = "Success", Message = "The installtion was successfully updated"});
return RedirectToAction("Index");
However, on the client, ViewData is null/empty, i.e. this client code
var notifications = eval("<%= ViewData["Notifications"]%>");
renders as
var notifications = eval("");
I'm sure I'm doing something small wrong.
Im using the ASP.NET Xml control and want to pass it a url to a rss feed and a stylesheet - so that i can style the rss myself on my website. When applying the full web path to the xml control [URL] i get an exception telling me that the document source is not a valid virtual path. What am i doing wrong? I would hate to download the file before showing it...
View 1 RepliesI am learning MVC using the v2 release with Entity Framework v4. Let's say I have 3 objects Game, Points and Players. They are related in the following manner:Game has points and the Points can have a player associated with them ( 1 Game to many Points and a Point object can have one Player).
I am attempting to use the EditTemplates feature in MVC2 to render my views. In my Game Edit view I want to have the basic Game object information editable, and also the related Points objects. Currently I am utilizing "`<%= Html.EditorForModel() %>`"(Which seems pretty slow) to render the Edit View and then I have a specific Game and Point EditTemplates.
The data renders correctly and is editable for both the Game and Point information. When I go to perform the update and submit the form I receive the "Game" object in my Update ActionResult. The basic properties are populated for the Game object but any deep properties such as Points are not; they appear as null. If I look at the Request.Form variables in debug I can see the Points fields are being passed to the server but do not place themselves back into the Game object.
In my Game EditTemplate I am using the following to render the Points objects:
<%= Html.EditorFor(c => c.Points) %>
My Points EditTemplate looks like: [code]...
why this is rendering as "Points.Points[index] instead of Points[index]? I tried messing with the parameters in the EditFor:
<%= Html.EditorFor(c => c.Points,null,"Points") %>
but then the inputs render as Points.Points[index]
I have the following line of code in an MVC2 project but I cant get it to render the HTML from the database, all I that is displayed is the HTML.
<%: (Model.Blog.BlogDetail)%>
I cannot seem to get over this problem. Im sure it is just a simple newbie question but I just cannot find the right answer on my own.
Im using MVC 2 and ASP. NET 4.0 to biuld simple CMS. Im storing encoded HTML in XML file which then i am passing to front page controller for display.
I understand that before inserting HTML from XML into the page, it should be decoded using HttpUtility.Decode() function.
[Code]....
I expected that this sould result in inserting decoded HTML into my index.aspx page. Then browser could render my decoded content for example in bold face.
What happens is quite awkward. In page source I have encoded HTML but it renders HTML with tags. For example I see "<strong> Lorem ipsum </stong>", instead of Lorem Ipsum.
I find it hard when using asp.net controls, to make proper css files because I don't know what the html output for the different controls end up as. For example, if I want to add a div tag using a asp.net control, it's not easy to know what kind of control I can use.
Are there any documentation that shows for each asp.net control, what the rendered html for that control will be? I understand that some controls will probably change it's output due to how it's configured, but most controls will at least follow a pattern here.
The best would of course be a service on the web where you can put in the asp.net control definition and get the rendered html out. Currently I have to put a control into my webform, run it and check the source in the browser, and if it's not the correct html tag, try another control and repeat. That get's tedious quite fast.
