I have a div with id="myDiv" and runat="server" inside a listview with id="lvItem".I need to access the div in code behind to add width of the div at runtime.How can I access the div from codebehid using C#?
View 2 RepliesWhile running ItemDetabound upon load of a listivew, I am trying to access the text in a label of the LayoutTemplate of a different Listview. It works fine if I try access the same labels under the same names if they are in the same listview, but not if they are in a different one. It was working for a while, can't figure out what I changed, but now says that object doesn't exist.
[Code]....
I need the ability to check a box and then store or remove the text of the checkbox clicked to my sql server database. see my code below that is written in vb.
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="SBN_Company_Cat_Types.aspx.vb" Inherits="ShopBuyName_Test_Site.SBN_Company_Cat_Types" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code].....
I am trying to access accessing a control in a Formview. I have tried several methods, but nothing seems to work
[Code]....
[Code]....
see the following code. How do I access the imageButton (or any other control I may happen to have) within the listView? In this case, I'd like to change the image of the imagebutton based on certain conditions in the code behind file while the listview is being populated.
[Code]....
I have a RadioButtonList control inside of a nested ListView control InsertTemplate. I need a way to access this control in the nestedListView_ItemInserting method.
View 6 Replieson my page, there are two listboxes,
[Code]....
Based on the selection of SchoolID in listviewSchools, the ListviewStudents will be filled with the data.
SchoolIDLabel is in the ItemTemplate of the ListviewSchools. The following works for insertitemtemplate
Dim txtTitle As TextBox = CType(ListView1.InsertItem.FindControl("txtTitle"), TextBox), but i can not Access a control inside the ItemTemplate of a listview.
I've googled around for a couple of days now and tried different solutions posted here and there, but nothing has worked so far. Therefore I'm forced to write a new thread about this subject.
I'm working on a solution containing nested listviews. The top listview lists different projects, and in each project a nested listview lists images from that specific project using a nested sqldatasource. Inside the nested listview I want the user to be able to add new images, and i'm using the InsertItemTemplate of the nested listview. When inserting a new image, the project need to be specified, as the project is a foreign key in my image database. The problem is that in my InsertItemTemplate, "Bind" and "Eval" does not work (I believe this is by design). Therefore, when adding the new image I don't have access to the project. I'm using the ItemInserting event of the nested listview to upload the image, and the optimal solution would be to have access to the project in this event and just pass it on as a parameter.
I try to datbind a listview which is inside another listview InsertItemTemplate.
[Code]....
I'm binding the listivew in the parent listview onitemcreated events. I receive the error Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
I have a ListView1 control that his <ItemTempleae> has a another ListView2. ListView2 is surrounded by <UpdatePanel> with trigger and also UpdateMode="Conditional". But, I don't know why ListView2 is not being update as it should, I need to refresh all the page to see the new data enter to ListView2 only. What is the problem? How can it be fixed? I think that the problem is something in the structure. There are about 10 ListView2 with updatepanel surronded them, so when I am looking to update a specific ListView2, it doesn't know which one to update because there are lots of them. What to do in order to solve that problem?
View 3 RepliesHow to handle the itemcommand event for the inner listview, here is my code:
[Code]....
I'm trying to create a table with Listview and one of the fields I'm using is supposed to show a hyperlink to a more detailed view of the data shown, how I want to do that is by using FindControl on the ID of that item and then changing the value into a hyperlink of the detailed view page with a querystring attached, the problem is that I have no idea how to re-insert that data back into the listview field, which looks something like this:
<ItemTemplate>
<td>
<asp:Label ID="ViewLinkLabel" runat="server"
Text='[insert Link Here]' />
</td>
</ItemTemplate>
I'm still an amateur in ASP.net, and if any of this seems too convoluted when there's a much easier to do this that I don't know about.
Given the following code for a textbox in the EditItemTemplate of ListView:
TextBox txt = (TextBox)ListView.EditItem.FindControl("ImageURLTextBox");
How would we code for a textbox in the ItemTemplate of the same ListView?
I have the following selectparamter for a listview
[Code]....
I have a listview which I would like to fill with self created user controls.But the problem is that the properties in the user control is not set. The usercontrols are displayed but the property values I enter is not set. Why is that?
Here is the aspx code.
[code]....
I have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
I am loading the autocomplete extender properly but I need the PK from the selectedValue. I have looked at other examples and they do NOT show how to drill into the tabcontainer, then drill into the listview, and then locate the extender value. Here is what I have so far. My "TABCONTAINER" value shows the extender correctly but I am unable to locate it.
[Code]....
I'm trying to change the visibility of a imagebutton to false, if the imagebutton.ImageUrl="". The problem is that the imagebutton is inside "ListView2", and "ListView2" is inside "ListView1". Who can I do this in vb code... or even a javascript.
View 4 RepliesI have a listview that is showing its result by using a linq query. The linq query goes like this.
[Code]....
* db.Varer: Varer is a table that contains basic product information like proudct name, product nr. etc. ** a.fk_kategori_id == CatParamId : I'm just saying limit the result according to the Category ID (a.fk_kategori_id). The category id is coming from a dropdownlist (CatParamID) *** Join: Besides the Varer (Product) table I also have another table, Sizes. This Sizes table contains 6 columns (ID_Sizes (int) primary key and the columns: OneSize, S, M, L, XL, XXL all are bit (true or false)). There is a relationship between Varer table and Sizes table. It says that I can only insert a value into the "fk_sizes_id - column" of varer table if that value already exists as primary key within the Sizes table. **** I'm starting by picking basic product values like productId, ProductName etc from the Varer (a) table ***** Then I'm picking the corresponding Sizes values (onesize, s, m, ...) from the Sizes table. Now within my ListView I'm showing the above result by using Eval, like this.
[Code]....
And this works perfectly, but now comes the thing that is causing me trouble. I have the below drop down list (still within the ListView ItemTemplate):
[Code]....
I want this drop down list to be populated with only those of the "linq query's Sizes table result" that are true. By "Sizes table result" I mean these
[Code]....
How to set the width property the LayoutTemplate in a listview through codebehind
[Code]....
[Code]....
Is it possible to set properties of an control inside a loop without using code behind? For example how can I set the Text property of the LinkButton inside the following loop at runtime, color being a POCO?
<table>
<%foreach (var color in GetColors()) {%>
<tr>
<td><asp:LinkButton runat="server" Text='<%# ??color.MyProperty?? %>' /></td>
</tr>
<%}%>
</table>
(i) Default.aspx and Default.aspx.cs(ii) MyControl.ascx and yControl.ascx.csTo access MyControl.ascx from Default.aspx, we use following in Default.aspx:
Register
TagName="abc"
TagPrefix="Controls"
Src="Numabc.ascx"%>
But now I am wishing to access in MyControl.ascx.cs from Default.aspx.cs page. By default, I am totally unable to access any control or function exist in MyControl.ascx.cs file or say codebehind.
I have a key in the web.config file like:
<add key="MailFrom" value="my@email.com"/>
I need to access it in the code behind.How to do this in c#?
I was trying to access < script type='text/javascript' ....>< / script > existing within Head tag.
What I was doing to achieve that,
foreach (Control ctrl in Header.Controls)
{
Response.Write(ctrl.GetType() + "<br/>");
}
It gives me the reference of "title", "meta" and "literal" control. How can I get the control and get the "src" attribute of that tag.
I have a webusercontrol with a flash control. I want to assign the movieurl from codebehind when the webusercontrol is registered in a new page.
<uc1:PopVideo
ID="PopVideo1"
runat="server"
/>
inside this webusercontrol I have a flash movie player that I can assign the movieurl in codebehind on the webusercontrol. The problem is that I need to assign the value from the new page the control is registered under. How can I access the flash control from the new page and assign the value?