C# - Application Runs When Debugging But Not When Published
May 10, 2010
When publishing my web application and then running it will return the error
"Could not load file or assembly 'BaseApplicationName' or one of its dependencies. An attempt was made to load a program with an incorrect format."
However if I run the application through debugging (f5) it runs correctly.
I guess what it comes down to is
what differences are there when running an application through debugging vs publishing it that would cause a problem like this?
When publising I have it set to delete all existing.
History of how it started... I added the 32 bit Oracle.DataAccess dll to my 64 bit system. It would not work and crash giving the same error as above but with the Oracle.DataAccess name instead of the baseApplicationName. I have since removed all references to it and removed the dll to try and get it to run without it once again.
View 3 Replies
Similar Messages:
Dec 3, 2010
I'm finishing up my first web service. It stores data on a dataset that I later need to check up on, so I need to keep that information around. I've already enabled the session in the web service's method "EnableSession = true" [WebMethod(Description = "Receives status requests, as well as status udpates.", EnableSession = true)]
If I debug the web service everything works but if I try to use the application that sends the requests to the web service while it is published, the session keeps restarting again and again and again.
View 1 Replies
Aug 16, 2010
I have developed a web application in asp.net with c# with out using master page. I have developed this application in iframe.
The problem is that my application run smoothly but suddenly it stops and do some processing and it run again smoothly.
it stops any where on page load, on button click, on checkbox changed. i can not tell where it stops
it stops only when page post. i can see the processbar on browser's statusbar it stop for long time 40 to 60 seconds and after that i fire same event now process complets within 2 to 5 seconds
Hosting server detail :
1. IIS 6.0
2. Window server 2003.
3. Sql server 2005.
View 4 Replies
Jan 19, 2011
I have published my ASP.Net Web Application on remote IIS server using Project --> Publish options.
But I am not able to browse it.
View 2 Replies
Jan 12, 2011
My application runs quickly when debugging locally, but slows down to an almost unusable state once published. Oddly, the published version seems to be grabbing data very quickly from MSSQL - it's the part where I'm updating datatables and gridviews that is very slow. For example:
[Code]....
View 8 Replies
May 22, 2010
After publishing the solution from Windows XP, the AJAX pro tool are not working after being deployed to Windows Server 2008.
How can I solve this problem?
Using C#, .NET 3.5, and DevExpress tools.
View 1 Replies
Feb 9, 2013
Can I get Code website asp.net by save it or another way
the web site published on the internet by another person
View 1 Replies
May 5, 2010
I check WindowsPrincipal.Identity.Name against Active Directory security groups before allowing the user to edit data. If the user is not authorized I just present a read-only version of the data.
When I run my web app from the IDE everything works fine. I published the web app, made sure anonymous access was disabled, and invoked it from IE. The read-only page came up.
I then added code to write to the event log to display the WindowPrincipal.Identity.Name and saw that instead of displaying the user name, it was instead showing the server name. I verified again that Anonymous Access is disabled and integrated security is on.
View 3 Replies
Jun 22, 2010
I have developed an webapplication with some jquery and ajax (client side validations), it works fine when run locally.
But when i publish it to the IIS, the client side execution is not taking place.
Do I need to tweak the IIS to make it work.
I am using VS2008 and .net framework 2.0 on a winxp machine.
I am trying to publish to the local IIS (5.0).
View 4 Replies
Feb 2, 2010
I want to create an asp.net application which allow user to specify text file path and create a text file on the specified location by doing some processing from the sql server database.for specifying path of the txt file i am using setting
.xmlsetting.xml
<TextFilePath> "D:Text" <TextFilePath> //as specified by the user.
The code is working fine if it is not published Once the application is uploaded on the server(published) and run under the virtual directory.
View 3 Replies
May 26, 2010
After publishing the console application. We changed few connection strings related values in the app.config file, but the values changed is not been reflected in the published version.
What might be the cause for not reflecting the values which has been changed ???
View 2 Replies
Sep 20, 2010
we have a web application that one company prepared for us. this application read connection string from registery key in hkey_local_machine and connect to sql server 2005 database. It worked correctly in windows server 2003. we changed our Server'OS to windows server 2008. but we have a problem to login. after try to login we see this error: Server Error in '/dabir' Application. Login failed for user ''. The user is not associated with a trusted SQL Server connection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection. Source Error:
[Code]....
Stack Trace:
[Code]....
View 4 Replies
Sep 3, 2010
I have a vb.net web application in visual web developer 2008 with a dll file and i need to debug a method in that dll. I also have project source files for the dll file itself. How could i make the web application use the source instead of the dll file so that i'd be able to debug it? I've tried debugging the dll project itself, but it's not a very good solution, because it seems the dll depends on the web application settings and data and it would simply be too much work to get it working.
View 1 Replies
Oct 10, 2010
I'm writing an ASP.NET MVC site where I need to have a "Tasks" application that runs alongside the website. Such a "Tasks" application would collect data at set intervals and insert it into the database.
Of course, I could write a simple Console Application and use the Windows Task Scheduler to run it, but my site is being hosted by GoDaddy and I only have medium trust permissions.
Are there any methods for implementing such functionality while not violating medium trust permissions?
One method that I'm considering is a method in the site itself that gathers data, waits for a long time, and then gathers data again. Would that interupt users' connection to the site?
View 1 Replies
Nov 2, 2010
I've tried to debug sample ASP.NET and ASP.NET MVC applications in MonoDevelop 2.4 (on Mono 2.8 on Windows 7) but breakpoints doesn't work.If debugging MVC Application MonoDevelop prints the following into the output:
Mono.Debugger.Soft.VMDisconnectedException: An exception of type "Mono.Debugger.Soft.VMDisconnectedException" thrown.
at Mono.Debugger.Soft.Connection.SendReceive(CommandSet command_set, Int32 command, PacketWriter packet)
at Mono.Debugger.Soft.Connection.Type_GetInfo(Int64 id)
[code]...
View 2 Replies
Feb 5, 2010
We are trying to add a new page to a running web application. such that a new dll and aspx file are being added. I've setup break points in the code file and Built the application transfering the dll to the remote machine bin file and the aspx page to a folder within the web application. Note this folder is not in the same folder hierarchy as it built in. I'm not sure if thats the problem. Basically we are appending new functionality to a web application.I've copied the correct Remote Debug Monitor to the server and have it running.
View 1 Replies
Feb 4, 2011
I have two systems (System A & System B) both are windows xp.
System A is 32 bit operating system with more Memory so I Installed Visual studio here.
System B is 16 bit with low memory and some peripheral(Finger Print Reader, Thermal Printer) attached.
Now I need to develop a application for System B. Peripherals are attached with system B Only so i need to debug the application which is running in system B. But I cannot install visual studio in system B. Now how can I do that?
View 3 Replies
Feb 9, 2011
I'd like to add a delay between 2 lines of code because I'm testing an updateprogress template. Ideally, the one-liner.
View 7 Replies
Feb 8, 2010
I'm having a hell of a time trying to debug things. Basically I want to step through each line of code to see whats happening. But when I try to step to the next line of code, 9 times out of 10 it just finishes all execution instantly without letting me step.
For example if I set a breakpoint in the thread code, that breakpoint gets hit, and I might be able to step to the next line or 2 of code, but after that the next step just jumps to the end of everything as If I had pressed F5 (continue). I assume this is happening because the context gets switched from my current thread to the main thread (or some other thread), and Visual Studio gets confused and just finishes execution, ignoring my breakpoints.
I know about the Threads window, and I have tried many different combinations of freezing and flagging different threads, but nothing accomplishes what I want. I basically want to just keep hitting F10, and step through EVERY LINE OF CODE, regardless of what thread it's in. Im surprised this isnt the default behavior.
View 3 Replies
Jan 14, 2011
I have an ASP.NET 3.5 web application. For the application:
Configuration set to "DEBUG;
"Define DEBUG constant" checkbox is checked for "DEBUG" configuration;
web.config file contains 'true' as value for 'debug' attribute of 'compilation' node.
Nevertheless to everything the following code:
[code]....
put "DebugMode: False" into result string. In the same time I can't connect to the application with VisualStudio in debug mode...
Question:
how can I get real value of debugging mode?
View 2 Replies
Mar 10, 2010
I have a server running Windows Server 2003 R2 Standard Edition (Service Pack2) and our IIS server is hosting about 20 different asp.net websites. I've never noticed this in the past, but when I debug an application and it stops at a breakpoint, the other websites hang as well. If I try to go to any of the other websites, then I just get a while page that's loading until i pass the breakpoint or I stop debugging.Does this have anything to do with application pools and if so, how do i fix it? Or if it does not, any ideas on how to fix this issue? I find myself debugging my apps often and I can't bring down all other applications when I do it.
View 2 Replies
Feb 15, 2010
I am working on an application built using ASP.NET 1.1 but that invokes services built in ASP.NET 2.0.
Attempts to debug my code by setting a breakpoint and attaching the w3wp.exe process fail because IIS is running under ASP.NET 2.0.
If I select ASP.NET 1.1 as the version in IIS then debugging works, but the calls to the 2.0 services (which are everywhere) causes the page to crash.
Does anyone have a solution/workaround to this problem?
View 1 Replies
Jan 14, 2010
I got a probem when debugging web application using VS 2008. Here is the situation:I marked two breakpoints, one in the Page_Load event and the other on the button click event. When the debugger hit the breakpoint in the page_load event, everything was fine but when it hit the breakpoint in the button click event, VS 2008 suddenly stopped debugging. It seemed that the IIS worker process was terminated.I really don't understand this situation.
View 5 Replies
Oct 2, 2010
My new office project is based on an MVP design and is in VB.NET (.NET 3.5), using multiple libraries (like EntLib, internal corporate framework, etc.). The number of DLLs used as references is so huge (almost 50) that when I try to build/debug the application in VS2008, it takes almost 3-4 minutes to get the website running successfully.Wanted to know if there are any settings/areas which upon some modifications can help me reduce the build time? and what exactly can be the major reasons behind this long loading duration?
View 1 Replies
Jan 3, 2011
Whenever I stop debugging an ASP.NET IIS web application it seems to take very long before VS2010 becomes responsive again (2 or 3 minutes). This happens when I close Internet Explorer 9 (which stops the debugging session), stop debugging in VS (which closes the browser) or when I detach the debugger from the debugging menu (which leaves the browser open).
My CPU time for devenv.exe goes up to 25% during this period of time. I use the professional edition (no intellitrace). Starting without debugging performs ok when I close the browser. I have some add-ins and extensions installed like TestDriven.NET, Resharper, PowerCommands, Productivity Power Tools, VisualSVN,...
View 2 Replies
