C# - Error: Could Not Load File Or Assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0
Jul 8, 2010
I am getting this error that is related to ReportsViewer. I need to eliminate all references to this library. So where do I need to start deleting the references?
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I'm working on a project that accesses the Exchange Server. Before I replaced the project to a server, everything went fine. But now I'm getting this error.
I am developing a .NET 3.5 web application. We are using some of the Microsoft Reporting tools, which are a pain but a digress, and when I deploy, I get errors when trying to load the site.
This is the error:
[Code]....
However, my web config reads:
[Code]....
I specify 9.0.0.0 in everything. The only concern I have is that the build server uses .NET 4.0 but I have specified to build with 3.5 and on my deployed server I have the 9.0.0.0 dll files for the report viewer. why the server is looking for 10 when everything says 9?
I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
I am getting this message on my Page element. However my project references C:Program FilesMicrosoft ASP.NETASP.NET MVC 2AssembliesSystem.Web.Mvc.dllwhich is Version 2.0.0.0Furthermore my Web.config contains
while I still had Office 2007 still on my development PC. I recently upgraded to Office 2010 and even though the web.config file still remains with the above assembly reference, when I publish it and run it now i keep getting the following error ...
Quote:
Could not load file or assembly 'Microsoft.Office.Interop.Word, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
I also have installed the PIA for Version=14.0.0.0 on the server but I still get the same result.
I am using AjaxControlToolkit.dll 1.0.20229. For compiling my code in my DotnetNuke module. When I compile our code and upload it on Server Dotnetnuke application which is having latest 3.x version of AjaxControlToolkit.dll. I get following error. I am not compiling my code to a specific version of AjaxControlToolkit.dll.......................
I have a application in which i have read the mail from outlook. its working fine in local pc . but when i deploy this application on server then it gives me error like: on deploy machine outlook version is office 2007. Could not load file or assembly 'Extensibility, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I installed Cahrt control of ASP:Net and It works fine on local. I made neccessary changes on web.config but When I deploy it to my site I am getting the error ! It says as below;
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I face some problems while I host my web application(which is a PowerBuilder V12.0 .Net Web Appliaction Developed By PB V12.0 Classic or Migrated from Old PB Versions as the project files are Converted to ASP.Net *.aspx files) in IIS V6.0 on Windows Server 2003and After Installation of .Net Framework Version 4.0 to match the web application which requires .Net Framework 2.0+
The Error Message I get is as follows:-
Could not load file or assembly 'Microsoft.Expression.Encoder.Api2.dll' or one of its dependencies. The specified module could not be found.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Expression.Encoder.Api2.dll' or one of its dependencies. The specified module could not be found.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
When I view a page in browser it throws following error.
Could not load file or assembly 'Microsoft.Licensing.Permutation_f50a9_2.0(1907)' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Licensing.Permutation_f50a9_2.0(1907)' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
im facing the below issue can anyone tell me how to resolve itCould not load file or assembly 'Microsoft.Web.UI.WebControls' or one of its dependencies. The system cannot find the file specified.
Hi, I am trying to developing a project which is getting mssql version, creating tables,views and insert default datas to database. I have to develeope it working in MSSQL 2005-2008. Now my project uses using Microsoft.SqlServer.Management.Smo; using Microsoft.SqlServer.Management.Common; name spaces from MSSQL dlls.it works fine in serves which has MSSQL2008.Bu d-today i tried it in a server which has MSSQL2005 nad it failed.
Error;
Could not load file or assembly 'Microsoft.SqlServer.SqlClrProvider, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. So.Where can i find this namespace and and i need to add this namespace dll to my project. Else i need another way to do these process working in 2005 nad 2008.
I have developed a Web application in VS2008. It works perfectly on my development PC. When I publish and upload to the shared Windows hosting service (which supports ASP.NET 3.5), it fails (even when accessing it from my development PC). The error message is: Could not load file or assembly 'Microsoft.mshtml, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.I have read many forum posts on the subject, and have tried the recommended solutions:
Set the reference to Copy Local - VS2008 does not allow Copy Local for ASP.NET references, just for WinForms references.Copy mshtml.dll into the installation directory - I have tried 3 different versions of the file, both in the root directory and /bin/, under both the names "mshtml.dll" and "Microsoft.mshtml.dll". None work.install the Interoperability Assemblies from Visual Studio onto the server by running "vs_piaredist.exe" - I don't have admin access to the server and the hosting company won't do it.
I had web application developed in VS 2005 + Sql server 2005 + Ajax 1.0 Extension . (Developed in Windows Server 2005) Now i am migrating to VS 2008.(Windows Server 2008 + Sql server 2008)
After opening and compile my Existing application in VS 2008,i am getting error.
Errors :-
Unable to load file or assembly 'System.web.Extenstions'' version=1.0.61025. (I think it because of AJAX Extension version.So i installed AJAX Extension 1.0 but it will give me ambiguous error so i uninstalled.I am added reference for version=3.5.0 but again unsuccessful.) What i will do now? Also i used 'Microsoft.SqlServer.SmoEnum', Version=9.0.242.0 in VS 2005. (Are i have to change it to version=10.0.0.0? by adding reference to new version.) I also used crystal report.(Is there is anything to do with it?)
I have a .net web application hosted in Sharepoint 2007. Recently I added a page to launch an application(.exe) from the code behind of a .aspx page. The applicatoin is launched when I test it on my desktop(without Sharepoint). When I deploy the .aspx page and the dll to the Sharpoint, I get an error "Could not load file or assembly 'CheckService, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
I'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.: [URL]Below are the codes for my web.config
I am using assembly Microsoft.ReportViewer.Webforms Version=10.0.0.0. However, each time I build the solution it adds Microsoft.ReportViewer.Webforms Version = 8.0.0.0 by itself. I tried removing Version 8.0.0.0 reference manually and tried building it again but it keeps adding the later version.
I've been using a particular version of a PDF library (PdfSharp), with the dll file in the bin directory (bin/PdfSharp.dll). I use this to prepare, combine, split, and otherwise manipulate PDF files, both those that come from outside my app and those I generate using ReportViewer.
Today I saw there was a new version of the library and naively dropped the new .dll into the bin folder, replacing the old one (I rarely have need to mess with the 2 or 3 dlls in my bin folder and it's been 2 years since I set them up so I wasn't really sure how to proceed and didn't take the time to think too much about it). The PDF generation no longer worked, so I deleted the newer .dll and replaced it with the older one (I have copies in backups, the production server, etc).
Now, although I've confirmed that the dll in the bin folder is the older version (file Properties show correct older version number, file size is older file size, etc), and although the application works correctly, including those parts that call on the library, I can no longer access the data sources for my RDLC files -- when I open an RDLC file in the editor and choose Report->Data Sources, I get this error:
Could not load file or assembly 'PdfSharp, Version=1.2.1269.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb' or one of its dependencies. The system cannot find the file specified.
I am mystified: I don't understand the connection between a report's data source and this library; I know that the correct version (1.2.1269.0) is in binPdfSharp.dll; and I can find no references to any version of PdfSharp in any file in my application, other than the code that actually calls it (ie, there are no references to it in web.config or the .rdlc files or the dataset .xsd files). I've also been through the registry and find no references to the new version. I've tried deleting the dll and re-adding it using "Add Reference...", and I've tried "Update Reference", all to no avail.
I' m simply trying to import code from one namespace I've created into another .net application. I add the reference into my other application, but when I do a build, I get the following error.
Could not find file 'Microsoft.Windows.CommonLanguageRuntime, Version=2.0.50727.0'
This only happens on a particular namespace I've created, all others work fine.
