C# - IIS Redirect Moved Files?

Aug 18, 2010

I would like to reorganize the directory structure on a hosted website (i.e. I can not go in and configure the IIS settings).

Say I had 3 files in the root directory:

fruitcake.html,
chocolateCake.html, and
appleMuffins.html

Now, I want to move them to a new folder called Recipes. This is easy enough, but there are a lot of existing links out there that point to the other files. How would I construct a 404.aspx page to read in which file was in the address bar, then update the browser to go to the new location?

View 1 Replies


Similar Messages:

Security :: Non-asp Files / Moved The Pages And Files To Other Folders And Set The Web.config File On This Folder?

Jul 1, 2010

I was following the tutorials from this two sites:

http://www.15seconds.com/issue/070104.htm

http://aspnet.4guysfromrolla.com/articles/020404-1.aspx

Following the first site, it had worked but when I´ve moved the pages and files to other folders and set the web.config file on this folder, now it won´t work at all!!!

The file is an *.swf object. I did put the asapi.dll to map the extension on the website root, I´ve put the

[Code]....

on the web.config new folder and on the web.config website´s root.

It won´t work!!! I can access the file directly!!! on the web.config of the folder that contains the file, there is a <deny users="*" /> line.

View 4 Replies

Users Cannot Login To WebSite After Files Moved

Jun 25, 2010

VWD 2010 Express. Windows 2003 Server. I decided to move my web site from the Inetpub folder on my C: drive to an Inetpub folder on my D: drive to free up space on C:. I moved three web sites. Two of the sites worked fine after the move (I went into IIS 6.0 and changed the home directory of all the sites). One site, which requires authentication using the Windows Active Directory (AD), did not work properly. I could access the site and login with any administrator login. But all other users, although they enter the correct credential, continue to be reprompted for their username and password. The site uses "basic authetication" to check users credentials against the AD. Can anyone think of a reason I would have this peculiar behaviour just because I move a web site's files from C:inetpub to D:Inetpub?

View 6 Replies

C# - Response.Redirect Results In "Object Moved To Here"?

Feb 2, 2010

I'm working on a C# ASP.NET page that normally ends up redirecting to a "file:" URL. This seems to work fine the majority of the time, in the majority of circumstances, but occasionally (and, on my test system, apparently always) instead of a redirect to a file I get a page with the text "Object moved to here", where "here" is a link to the file that I was trying to redirect to, but with four slashes after the colon instead of two (i.e. "file:////testserver/docs/testdoc.doc")This is normally accompanied by a "System.Threading.ThreadAbortException: Thread was being aborted" message.

I've looked for a solution elsewhere and found out some interesting stuff about Response.Redirect causing ThreadAbort exceptions, but that doesn't seem to be the fundamental problem - it seems to me that the actual problem is the "Object moved to here" message, which causes the exception to be thrown.

EDIT: Forgot to mention I'm running Firefox (3.5.7) with IE Tab, so was about to mention that when I thought I'd better try it in IE, and voila - it works in IE (7).

View 1 Replies

Web Development - Redirecting Old Asp Files To New Aspx Files (Permanent Redirect, SEO)

Jun 28, 2010

I upgraded my site from asp to asp.net.This means that all of my previous asp files became obsolete.I don't want to lose my Google Ranking of the old pages.

What is the proper way to redirect?I tried to catch all of the old asp pages is my 404 and then to:

if Request.QueryString("aspxerrorpath").contains("index.asp") = true then
Response.Status = "301 Moved Permanently"
Response.AddHeader("Location", "http://www.domain.com/index.aspx")
Response.Redirect("/index.aspx")
end if


but it doesn't catch asp pages, only aspx.

View 3 Replies

Permanent Redirect Legacy Routes For Static Files In MVC?

Jan 12, 2011

Our old ASP.net site stored static images in a sub directory on the root called /images.

Our new ASP.net MVC site stores these images in the new layout of /Content/Images

I've changed all the pages in the site to cope with the new folder structure, but I'd like to set up Permanent Redirects from the old static images to the new location.

View 1 Replies

HttpHandlers / Modules :: Global.asax 301 Redirect Fails On .HTM Files, But Works Fine Elsewhere?

Mar 4, 2011

I just bought an old domain name and am looking to redirect as many old URLs as possible to acquire backlinks intended for the original owner for pagerank reasons. The original site had a lot of static pages ending in .htm which need to be redirected to directories. I use httpcontext in my Global.asax file to initiate 301 redirects and this works great on folder names or .aspx files, but whenever I try to redirect a .htm it fails.

Sample code:

if (HttpContext.Current.Request.Url.ToString().ToLower().Contains("http://www.example.com/oldpage.htm"))
{
HttpContext.Current.Response.Status = "301 Moved Permanently";[code]....

I also tried using my Parallels H-Sphere interface provided by my hosting company to do a IIS redirect, but whenever I hit submit the page just starts an infinate loop of sending a request.

View 7 Replies

Security :: Login Control Moved To IIS?

Jun 1, 2010

I used vs2005 to build a login control and create aspnetdb.mdf in the vs project folder. It works there

Copied the db and log file to an IIS folder, added modify permissions there for both the db and log files for user ASPNET and the folder the files are inAttached the db in IIS to SQL server management studio express. there I added the ASPNET acct to my SQL server and the attached db in IIS and gave ASPNET roles_fullaccess permissions. using this connection string in the web.config file

[Code]....

but still get 'SqlException (0x80131904): Cannot open user default database. Login failed.' when running the login control page in IIS.? there is something else to be configured for aspnet to be able to access the db for login validation?

View 3 Replies

MVC 2 Site Not Loading After Having Moved To Production?

Dec 3, 2010

I've setup an ASP.NET MVC 2 site several times on our test system on IIS 6. I'm fine with having to use the .aspx extension on controllers. The Global.asax.cs file looks like this:

public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.html/{*pathInfo}");

[code]...

View 2 Replies

Configuration :: Urlmappings Stopped When Moved To Ii7?

Feb 8, 2010

I have a web site that uses urlmappings in IIS 6. We recently upgraded to IIS 7 and now the mappings no longer work. I remember in IIS 6 I had to turn off Verify that file exists in the mapping section, and in IIS 7 I set the resource types to unspecified, but I can't get this working. What am I missing?

View 11 Replies

How To Change The Text Of Last Moved Item From One Listbox To Another

Jan 7, 2011

how can i change the text of last moved item from one listbox to another

View 2 Replies

Configuration :: Images And Scrips Broken When MVC App Moved To IIS?

Jul 28, 2010

I am trying to deploy my MVC application to IIS 7.5. According to the ASP.Net MVC 2 in Action book (pg 82) all i have to do is copy the bin, content, global, scripts, views, and web.config folders and files. However, when I try to go to the app all the image, scripts, and stylesheet links are broken. If I try to "fix" the links for example "../../Content/myImage.jpg" to "/Content/ccac_logo.jpg" the images will work in IIS but not in the local development server (that comes with VS). In addition, I cant get the script files (like jquery-1.4.1.js) to work at all when served in IIS. What am I missing?

View 3 Replies

DataSource Controls :: Item To Be Moved To A 'recycle Bin'?

Jun 25, 2010

I'm building a Content Management website which will also include other features. When an admin member deletes an item through the admin panel, I would like this item to be moved to a 'recycle bin' for 30 days (then automatically deleted).What is the best way of implementing this feature? One idea I had was to have a 'Deleted' bit column in my table, then only show records [Code].... However this would mean having to remember to put this condition in place everytime I [Code].... from the table.

Another Idea I had was to have a second table where the records would be moved to when deleted. However I have many tables being used in my website, so this would mean doubling the amount of tables, and having duplicate table structures (which could cause consistency issues in the future).Ideally I would like to have a 'RecycleBin' table which all the records are moved to, but this could contain 100s of columns to be able to store data from all the different tables.

View 2 Replies

Configuration :: 404 Error On Aspx Page When Moved To NAS (UNC Path)?

Nov 23, 2010

I have a site with 2 web servers and NLB (Windows Server 2008 and IIS 7). I'm trying to move the site to NAS storage accessed via a UNC path.

I have copied the site files to the NAS and set all permissions on the NAS. The only change I'm making in IIS is to the sites path. I can change the path back to local storage on the web server and there is no error. I switch the path to the UNC path and I get the error.

When set to the UNC path, within IIS Manager on each web server I can successfully browse to HTML files, but I get a 404 browsing to ASPX files. I've narrowed the error down to something going on when the page directive is in the aspx file. That is, when the aspx file has only html, the page will load fine. When I add the page directive to the aspx file I get the 404:

<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Test.aspx.cs" Inherits="GPS.Custom.Test" %>

I don't see anything in the code behind that could possible cause 404, and the site files match exactly between those on the web server and those on the NAS.

View 3 Replies

Security :: Object Moved Error While Consuming A Web Service

Apr 13, 2010

I've a quick question and request you all to respond soon. I've developed a web service with Form based authentication as below. 1.An entry in web.config as below. <authentication mode="Forms">

View 1 Replies

AJAX :: Call Function After Slider Handle Has Moved

Jan 10, 2010

My web app is using a sliderextender to allow the user to change the distance. After the slider handle is moved and the mouse button is release, I would like to call a function to query the results and rebind my datalist.

How can this be done?

my slider control is:

[Code]....

View 1 Replies

Moved To A New Domain Name And Now Project Asks For Login When Going To Other Pages?

Mar 22, 2011

I got a new domain name for my project that I developped and I went in and changed all the old domain names to the new ones thru out the project and it actaully seemed to work. For a few days now when I first go to the page it askes me to login like it should then when I navigate to other pages it asks for login again once logged in that page then works well if I navigate to a new page for the session it asks again to login. I am using forms authentication.

View 5 Replies

Data Controls :: Edit A GridView Row When Mouse Is Moved Over It?

Apr 23, 2014

Column1        Column2     Edit

1               A                edit

2               B                edit 

Now mouse hover on  2 or B then how it would selected or get editable.

View 1 Replies

How To Redirect Aspx Files That Are "Not Found"

Jan 11, 2011

I recently migrated my site from a aspx site to wordpress. The wp site is now hosted on rackspace cloud.

When I go to index.aspx I get the following message:

Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. etc.

Previous times I have done a migration like this I uploaded a file index.aspx with a redirection inside and that worked well, but now it doesn't seem to find the file at all.

Nor did a redirect from the htaccess, nor the redirection plugin. I just get that same message.

View 2 Replies

Accessing The WebSite Administration Tool Once Moved To A Production Server?

Jan 6, 2010

I'm very new to ASP.Net, but I've put together a reasonable site. I have used the user account and rolls which come with VS.

This all works fine for me, but I want to be able to change user's rolls and folder security when the site is live.

Is there any way of accessing the ASP.Net Web Site Administration Tool once the site has been moved to a production server?

If not is there any easy way to accomplish this other than write pages to do this yourself?

View 7 Replies

Localization :: Global Resources Not Being Updated When Moved To Production Web Server

Jan 28, 2011

I have a masterPage that has several labels populated by a Global Resource file. For some reason every time I add a entry to the Spanish global resource file and precompile my website and move out the App-GlobalResources.compiled and App_GlobalResources.dll. The changes/Updates do not seem to be reflected on the Prod Web Server. Am I missing a file I need to move to the server? the update is working fine when I run the site locally.

View 1 Replies

Configuration :: Application Moved To ~/Account/ Path, Not Working Anymore?

Jan 23, 2011

I created an application that basically takes the values from a bunch of fields on the page and adds the data to a SQL database table when I click the 'submit' button. However, I created the file directly under the website path, and I created it while it was like that and I tested it without any user authentication going on.

Now, I'd moved it into the ~/Account/etc/... path, because I only want it to be used by authenticated users, and it loads just fine, but when I click the 'submit' button as I used too, it doesn't seem to be loading the info in the database anymore. Why would that happen? do I need to enable SQL to work with the authentication as well?

View 5 Replies

Microsoft Chart Control (VS 2008) - Show Value When Cursor Is Moved

Jan 28, 2013

I have a simple chart control on my form. it displays data fine in X and Y axis. On X axis, i have time period (1 day,1 week, to 30 Years- total of 27 points on x axis) and Y axis has interest rate.

when the cursor is moved in the chart area, I want to show the exact value of Y axis. Just like yahoo finance shows when we click on a graph of a stock symbol. Say on my chart, when user hovers on say 2 Y on the graph, it should show the exact interest rate which is on the Y axis.

View 1 Replies

Installation :: Moved To Win7 - Project Won't Run - Internet Explorer Cannot Display The Webpage

Jun 30, 2010

I just was issued a new PC that has Win7 (non-64 bit). We use SVN as our source control, and I pulled all the web projects down to the new machine. After configuring IIS, I compiled one project and ran. Almost immediately I get the error "Internet Explorer cannot display the webpage". I ran the diagnostics, and get the message "The remote device or resource won't accept the connection". Looking in the event viewer, nothing showed up. I had this running on a Vista Ultimate box, and even did a one to one compare of the settings between the two boxes, and things are the same, but obviously I've missed something. Any thoughts on what to investigate? How can I see a better message than the standard (already turned off Friendly Messages)?

View 3 Replies

Forms Data Controls :: Foreign Key Fields Are Moved To The Bottom Of Detailsview?

Sep 15, 2010

I'm not sure if you would consider it a foreign key field or not, but I have an agency table with an association to my Project table. It exists primarily to limit the input values of agency in the Project table to those listed in the Agency table. Anyway, everything works fine, except that when you insert/add a project, the Agency field is moved to the end of the list. I'd like to move it back where it belongs (further up the list).

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved