C# - LoadControl (string) In Different Assembly?
Mar 31, 2011
I'm developing a stand-alone ASP .NET component for dropping in to various sites we create.
Part of the application is a CompositeControl, which needs to load a UserControl.
However, CompositeControl has no LoadControl() method - in stead, I must (as far as I can see?) rely on Page.LoadControl() and this is a problem! How do I know the path to my control, when the page is not part of the assembly?
The page the CompositeControl is situated on resides outside the assembly I am writing the Page.LoadControl() code in, and thus cannot find my .ascx file.
I've tried LoadControl(type, object[]) but this doesn't load the "code infront" file, which I need.
So - how do I find the Path to some .ascx file inside some included assembly (name known, ofc) for my Page.LoadControl? Or, alternatively, is there some other way to load the control from inside the CompositeControl?
View 1 Replies
Similar Messages:
Feb 18, 2010
I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
View 1 Replies
Feb 24, 2010
Is there any way for me to override the values that are stored in a third party assembly in an embedded resource file?
Using Red Gate's .Net reflector, I can see there are 6 resource items, but I only want to change to of them when using it in my web application.
View 1 Replies
Oct 12, 2010
I'm trying to make a decision about how to display my data. What I have now is a list of products displayed in a repeater. But for code-maintenance I've put my product items in a seperate usercontrol and loading them in a loop with db results using LoadControl.The product control itself is very simple, just a few public properties like title, url, rating but I'm not sure if this will affect my performance. I did some reading here and on forums and some people say it's not the best practice especially if you have more then 20 or 30 of these controls. So, is it really a performance hit using this method or does it stay ok with around 10.000 hits a day.
View 2 Replies
Jun 30, 2011
I have a usercontrol that I load dynamically:
Code:
Sub PageLoadEvent()
Dim ctlIntrotext As Control = LoadControl("tryktabKapacitet.ascx")
plh1.Controls.Add(ctlIntrotext)
End Sub
and then adds the sub to the Page_load, that works fine.However:
1) How do I call subs from the usercontrol?
2) How do I add the OnClick-events which I normally have in the webform source, see example...
Code:
<uc9:TryktabKapacitet ID="TryktabKapacitet1" OnBtnNulstilClick="TryktabKapacitet1_BtnNulstilClick" OnSetAllModulesK="TryktabOptimering1_SetAllModules"
OnSetOneModuleK="TryktabOptimering1_SetOneModule"
OnBtnClick="TryktabOptimering1_BtnClick" runat="server"></uc9:TryktabKapacitet>
View 4 Replies
Nov 26, 2010
Is it possible to LoadControl in windows application? I have email generation as web, but I want to move it to windows service for monthly newsletter.
Emails now are implemented as UserControls, in this way html person can easily modify look & feel.
Current rendering implementation looks like:
StringBuilder sb = new StringBuilder(4000);
StringWriter sw = new StringWriter(sb);
HtmlTextWriter htw = new HtmlTextWriter(sw);
Page page = new Page();
EmailTemplateBase emailCtrl = (EmailTemplateBase)page.LoadControl(
"Controls/EmailTempaltes/Template.ascx");
// Exception here
emailCtrl.DataContext = dataContext;
emailCtrl.Parameter = parameter;
emailCtrl.RenderMode = renderMode;
emailCtrl.DataBind();
emailCtrl.RenderControl(htw);
subject = emailCtrl.Subject;
string MessageText = sb.ToString().Replace(" ", "").Replace(Environment.NewLine, "");
return MessageText;
View 2 Replies
Jan 20, 2010
In the past I've used UserControls to create email templates which I can fill properties on and then use LoadControl and then RenderControl to get the html for which to use for the body text of my email. This was within asp.net webforms.
I'm in the throws of building an mvc website and wanted to do something similar. I've actually considered putting this functionality in a seperate class library and am looking into how I can do this so that in my web layer I can just call EmailTemplate.SubscriptionEmail() which will then generate the html from my template with properties in relevant places (obviously there needs to be parameters for email address etc in there).
I wanted to create a single Render control method for which I can pass a string to the path of the UserControl which is my template. I've come across this on the web that kind of suits my needs:
[code]....
Does that make sense? I was just wondering if this is at all possible in the first place and how I'd implement it? I'm not sure if it would be possible to map the properties set on 'object' to properties on the loaded user control and if it is possible where to start in doing this?
View 1 Replies
Mar 28, 2011
We use Page.ParseControl to interpret a string of XML into controls. Does it use some kind of caching mechanism? If not - is there a way to cache its result?
Page.LoadControl seems to support some sort of caching.
View 1 Replies
Jul 25, 2010
I need from a ascx (control_A) load dynamically another user control (Control_B), for do that I use LoadControl passing parameters to the control_B's constructor, in this way:
View 7 Replies
Jan 5, 2010
I have a dynamically created user control which is accomplished usingLoadControl().
When I debug, the LoadControl call is called once, however the Page_Load inside the user control is called twice. On each occasion, the postback property is false, so it seems somehow the Page_Load event is called outright 2 times and nothing to do with any postback?
View 15 Replies
Feb 6, 2010
Here is what I am trying to do. I have a page with two link buttons and an updatepanel (the two linkbuttons trigger the updatepanel). I have two usercontrols which have labels with same ID's. When I click the first link button, I add the first usercontrol to the updatepanel and set the label value to datetime.now
if i click the second link button i see that the value of the label from the first control is set in the label in second user control. if the id's are different there is no problem - but in my case the usercontrols are being developed by different teams and I am integrating them in the way i mentioned - so they may have same ids.
View 3 Replies
Oct 11, 2010
i was wondering if visual studio 2010 can be used as an assembly editor too????if yes where do i have to go to create a first blank page for an assembly project?
View 1 Replies
Jul 5, 2010
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project, it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find assembly reference for System.Net there also.
So bit confused how it is working and where the assembly reference has been added and how?
View 1 Replies
Nov 1, 2010
I created a user control, then use LoadControl to call the user control in a web form. Everything is working fine on my computer. When my work is copied to another developer's computer, the content of the user control does not show. All other pages are working fine.
The only difference I could think of between my computer and another computer is the other computer use ajax-created master page. But this web form that calls the user control does not use any master page.
View 4 Replies
Mar 10, 2010
I am running into a weird issue. Please follow the comments in the attached code, along with the code.
Basically - I am trying to let a dynamic control class decide on what its javascripts are and what it wants to send to the browser.
But for some reason, this is not working - the javascript is not getting written to the browser page after the post back, even though I see the dynamic control on the browser page.
Here is the code snippet:
[Code]....
View 4 Replies
May 2, 2010
I'm getting following warning
Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
What does this mean and how do I fix this?
View 1 Replies
Mar 27, 2010
<% @
Register
src="myControl2.ascx"
tagname="myControl2"
tagprefix="uc4" %>
Page_Load(object sender,
EventArgs e)
{
myControl2 mc = new myControl2();
//is there anything wrong with the preceding way? Why ever use LoadControl?
Control myLC = LoadControl("myControl2.ascx");
//Why ever do it the LoadControl way?
}
View 10 Replies
Jun 3, 2010
I just want to create Shared Assembly and use that assembly in our application.I am using VS 2005.
Step 1
I am trying to build a dll.
Create class library project <TestDllHell>.
Under that project add CalculationArea.cs file.
[Code]....
Then TestDllHell.dll add into GAC successfully.
Now I want to use it in my Website project so did the following steps but unable to view that dll in .Net Reference List Box.
•I go for Run regedit to edit the Windows Registry.
•Navigate to the HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETFrameworkAssemblyFolders key.
•Right click on the AssemblyFolders key, then select New > Key. Enter the name of your assembly (without the .dll extension).
•Double click on the key's (Default) value. The Edit String dialog will appear. Enter the full path of the folder where your assembly resides. Note that all assemblies in that folder will appear in the Visual Studio list.
•IMPORTANT! You must exit and restart Visual Studio to see your assembly in the Add Reference dialog.
My question is that
How can I get that dll in my add reference assembly List .Net section?
And if I modify that dll(TestDllHell.dll) then again register in GAC then version will be different,So how can I told my client application that which dll you choose?
View 3 Replies
Oct 11, 2010
I have to use a ckeditor in my application but I dont know how to write the
@ Register Assembly="" Namespace="" TagPrefix="" %>
From where I could get the assembly?
View 3 Replies
May 28, 2010
Is DLL and assembly same thing ? Such as mscorlib.dll , is this a assembly too ?
View 18 Replies
Feb 22, 2010
How to know which application is using an Assembly in GAC? I want to remove unwanted assemblies from GAC but it is not getting removed as it is used by some other application.
View 2 Replies
Apr 4, 2010
I have a shared assembly, in which it has 4 versions and I have placed it in GAC location. I have to Use the 2nd version of the assembly. Please let me know how should i indicate the 2nd version of the assembly? Which one tell to CLR to find exact 2nd version?
View 6 Replies
Oct 29, 2010
Can anyone tell me if its possible for a site or application that is running against .net 2.0 to call an assembly that was compiled using the 4.0 framework?
I always thought that this was possible, however when I try and add the reference to Visual Studio, I get an error saying that its not happy with the difference in versions.
View 3 Replies
Apr 20, 2010
I created this website and it work fine on local machine but when i upload it to remote server then it throws error that it cant find assembly....
The assembly is not in my Bin folder and i can not find it in my machine or at least don't know where to look.
Parser Error Message: Could not load file or assembly 'MySql.Data, Version=6.2.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
View 3 Replies
Feb 25, 2011
I created a custom virtual path provider and build provider and was wondering if it was possible to somehow specify the name of the assembly that get's generated, rather then letting asp.net come up with a name?
View 1 Replies
