I have a shared assembly, in which it has 4 versions and I have placed it in GAC location. I have to Use the 2nd version of the assembly. Please let me know how should i indicate the 2nd version of the assembly? Which one tell to CLR to find exact 2nd version?
View 6 RepliesI need to know which version of the report viewer control is used on a web server. If I can find it without asking it would be nice.Is there a way, by code, to find out which version of the assembly is used on the server?
View 2 RepliesAjax control toolkits old version's Calender working properly in IE 6 but this version dosn't support asynchronous file uploader control, But the version available for .net framework 3.5 has issues like its making hang the explorer but it has async file uploader. one of my asp.net application targeting .net frame work 3.5 using vs2008 need both options. use both controls(both assemblies) in the same projects.Client need to access application through IE6 only
How can i access both assemblies in the same project ?
How can I use any available version of an assembly on an ASP .NET page?
For example, I use this tag before adding a Crystal Reports control on a web page on my computer:
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
However, if I install this web page on a computer that has a different version of Crystal Reports, I would have to change the version part of the assembly attribute:
<%@ Register Assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
Is there any way I can avoid this by instructing ASP .NET to use the newest available version or specify the minimum required version?
how to register same name assembly but different version in webapplication
View 1 RepliesI have a application in which i have read the mail from outlook. its working fine in local pc . but when i deploy this application on server then it gives me error like: on deploy machine outlook version is office 2007. Could not load file or assembly 'Extensibility, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
View 2 RepliesI installed Cahrt control of ASP:Net and It works fine on local. I made neccessary changes on web.config but When I deploy it to my site I am getting the error ! It says as below;
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
I am getting this message on my Page element. However my project references C:Program FilesMicrosoft ASP.NETASP.NET MVC 2AssembliesSystem.Web.Mvc.dllwhich is Version 2.0.0.0Furthermore my Web.config contains
<assemblies>
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
This is VS2010.I created the blank project with VS2010 and then copied the code (without Web.config) from the old project.
I am getting this error that is related to ReportsViewer. I need to eliminate all references to this library. So where do I need to start deleting the references?
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<add assembly="Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
I keep getting this strange error (below) on my local machine on the first time the page loads,
Then if I reload it - it loads correctly...
What is really strange is that it does not happen on the server (same settings)
I'm using AJAXControlToolkit.dll version 4.1.40412.2
and this script manager (if not I get the Common.Common.js error)
[Code]....
<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
this error message appeared after i transfered the web application into another server and run it
the error row is as follow:
<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
I had web application developed in VS 2005 + Sql server 2005 + Ajax 1.0 Extension . (Developed in Windows Server 2005) Now i am migrating to VS 2008.(Windows Server 2008 + Sql server 2008)
After opening and compile my Existing application in VS 2008,i am getting error.
Errors :-
Unable to load file or assembly 'System.web.Extenstions'' version=1.0.61025. (I think it because of AJAX Extension version.So i installed AJAX Extension 1.0 but it will give me ambiguous error so i uninstalled.I am added reference for version=3.5.0 but again unsuccessful.) What i will do now? Also i used 'Microsoft.SqlServer.SmoEnum', Version=9.0.242.0 in VS 2005. (Are i have to change it to version=10.0.0.0? by adding reference to new version.) I also used crystal report.(Is there is anything to do with it?)
I have a .net web application hosted in Sharepoint 2007. Recently I added a page to launch an application(.exe) from the code behind of a .aspx page. The applicatoin is launched when I test it on my desktop(without Sharepoint). When I deploy the .aspx page and the dll to the Sharpoint, I get an error "Could not load file or assembly 'CheckService, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
View 1 RepliesI'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.:
[URL]Below are the codes for my web.config
[Code]....
Here's my code in the webform
[Code]....
I just migrated myDocuments folder to a new laptop (windows 7, 64 bit). The visual studio project WAS working on my desktop computer (windows XP pro).
Runtime error is:
ASP.NET runtime error: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f
It references the config file, so I am looking to see if I need to add something in there or what?
I'm working on a project that accesses the Exchange Server. Before I replaced the project to a server, everything went fine. But now I'm getting this error.
View 2 RepliesI've been using a particular version of a PDF library (PdfSharp), with the dll file in the bin directory (bin/PdfSharp.dll). I use this to prepare, combine, split, and otherwise manipulate PDF files, both those that come from outside my app and those I generate using ReportViewer.
Today I saw there was a new version of the library and naively dropped the new .dll into the bin folder, replacing the old one (I rarely have need to mess with the 2 or 3 dlls in my bin folder and it's been 2 years since I set them up so I wasn't really sure how to proceed and didn't take the time to think too much about it). The PDF generation no longer worked, so I deleted the newer .dll and replaced it with the older one (I have copies in backups, the production server, etc).
Now, although I've confirmed that the dll in the bin folder is the older version (file Properties show correct older version number, file size is older file size, etc), and although the application works correctly, including those parts that call on the library, I can no longer access the data sources for my RDLC files -- when I open an RDLC file in the editor and choose Report->Data Sources, I get this error:
Could not load file or assembly 'PdfSharp, Version=1.2.1269.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb' or one of its dependencies. The system cannot find the file specified.
I am mystified: I don't understand the connection between a report's data source and this library; I know that the correct version (1.2.1269.0) is in binPdfSharp.dll; and I can find no references to any version of PdfSharp in any file in my application, other than the code that actually calls it (ie, there are no references to it in web.config or the .rdlc files or the dataset .xsd files). I've also been through the registry and find no references to the new version. I've tried deleting the dll and re-adding it using "Add Reference...", and I've tried "Update Reference", all to no avail.
I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
View 1 RepliesI am using AjaxControlToolkit.dll 1.0.20229. For compiling my code in my DotnetNuke module. When I compile our code and upload it on Server Dotnetnuke application which is having latest 3.x version of AjaxControlToolkit.dll. I get following error. I am not compiling my code to a specific version of AjaxControlToolkit.dll.......................
View 2 RepliesI develop an ASP.NET 2.0 with VS 2008, VB.NET, and sometime a get this exception when web application is launching.
Message Parser Error: Could not load file or assembly 'AjaxControlToolkit, Version = 3.5.40412.0, Culture = neutral, PublicKeyToken = 28f01b0e84b6d53e' or one of its dependencies.The definition from the assembly manifest does not match the assembly reference. (Exception from HRESULT: 0x80131040)
To solve this problem, I need to regenerate the project. I would like to understand why this error append sometime. I try to check the version referenced in project property, try to check the version attribute on Web.Config :
<pages theme="Formulaires" validateRequest="false" styleSheetTheme="Formulaires" enableEventValidation="false" enableViewStateMac="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
It the correct version... i don't understand about this problem.
I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
Are the Crystal Reports objects within Visual Studio (I'm using 2005) the full version or is it a trial version that is missing features?
View 1 RepliesWe have an application that is already deployed in the production environment. And currently it is using Dundas evaluation version. We tried updating it to the licensed version by simply pasting the dll file. but we got the error message as "The file has not been pre-compiled and cannot be requested".
View 1 RepliesI'm try to get my site to detect what browser someone is using to ensure they're using one that is compliant with our site. Everything works, except Firefox seems to post the wrong version in the Request.Browser variables.I'm on Firefox 3.6.10, but Request.Browser shows Mozilla 1.9.2.10. It's correct in the HTTP_USER_AGENT string:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 YFF35 Firefox/3.6.10 ( .NET CLR 3.5.30729)
Is there a way to detect it better without having to parse through the HTTP_USER_AGENT string?
Is there any limit on the size/numbers in the version number of the FormsAuthenticationTicket.
I tried to create an ASP.NET cookie using forms authentication, with a large version number(ex: 1234567 need this number for identification purposes). But when I decrypt the cookie I get 135 as the version number.
Initially the old forms authentication cookie was removed, in order to add new information.
Response.Cookies.Remove(FormsAuthentication.FormsCookieName);
Following is the code I used to create the FormsAuthentication cookie.
FormsAuthenticationTicket newAuthTicket = new FormsAuthenticationTicket(1234567, un, DateTime.Now, DateTime.Now.AddHours(5F), false, user_data);
HttpCookie newauthCookie = new HttpCookie(FormsAuthentication.FormsCookieName, FormsAuthentication.Encrypt(newAuthTicket));
Response.Cookies.Add(newauthCookie);
After retrieving the cookie, the version number I got was 135. This number varies with different version numbers.
string cookieName = FormsAuthentication.FormsCookieName;
HttpCookie authCookie = Context.Request.Cookies[cookieName];
if (authCookie == null)
{
return;
}
FormsAuthenticationTicket authTkt = null;
authTkt = FormsAuthentication.Decrypt(authCookie.Value);
if (authTkt == null)
{
return;
}
int versionID = authTkt.Version;
Can someone let me know if it's a bad idea to use such big version numbers, or am I missing something in this.