C# - How To Get The Html Code Of .net Controls

Aug 29, 2010

have made a asp.net table which on run time gets populated with labels, literals, data, formatting etc.form1.innerhtml says page doesnot have literals only.i need to extract this asptable generated at runtime, as html code so that it can be eported to a word file..(as word easily supports html) and the browser is also displaying html so how to get the html?

View 2 Replies


Similar Messages:

Forms Data Controls :: Printing Html Code Instead Of Printing Html View In PDF?

Dec 22, 2010

I am using formview control to generate invoice. But instead of printing html view it is printing html code in PDF. I am doing like this:

[Code]....

View 2 Replies

Convert Html In A Vb.net Textbox / Need To Enter Html Code Into (like < Strong>?

Jan 19, 2011

I have a textbox which I need to enter html code into (like < strong> or < em> for example).The trouble is this is causing an error writing this back to the database. A potentially dangerous Request.Form value was detected from the client (tbVOther="< strong>testIs there a way around this without turning off the request validation setting?

View 3 Replies

Web Forms :: How To Get Html Controls In Code Behind For Pass The Value

Jun 11, 2010

I Am working on Shopping Cart Website. I Want To Pass Product Amount And Transaction Id To Bank.

MY code In Design Page Is

<input type="hidden" name="Amount" value='100'/>
//

If I pass Amount (100) Here Then It Works But I Am using Server Control Label1 For Show The Amount Now I want to Pass Label's value at the place of value

I want To Do Like

<input type="hidden" name="Amount" value='Label1.Text'/>

Or

Request.Form("Amount").Value = Label1.Text'

View 1 Replies

Web Forms :: Dynamic Injecting HTML Code With Controls?

Jan 1, 2011

i need to dynamically add HTML codes that contains some asp.net controls.

View 4 Replies

Web Forms :: Call A Code Behind Function Form Html Source Code?

Mar 3, 2010

I want to call a function present in code behind from front page (html : source code)

i want to use like this:

Source code

<a href='<%# linkAlpha("B").ToString()) %>' title="B" id="B_List" runat = "server">B</a>

Code Behind

protected string linkAlpha(string value)
{
// /market-research/<%#Eval("customname")%>/
string str = "";
if (Request.Url.DnsSafeHost == "localhost")
{ // /market-reports/<%# Eval("customname")%>/
str = "Alpha_Category.aspx?q=" + value.ToString().Trim();
// Response.Redirect("Alpha_Category.aspx?q=" + value.ToString().Trim());
}
else
{
// str = "/market-reports/" + value.ToString().Trim() + "/";
str = "/Alpha_Category.aspx?q=" + value.ToString().Trim();
}
return str;
}

View 2 Replies

Web Forms :: How To Generate HTML Code By Commands From The Code Behind Page

Dec 30, 2010

how to generate HTML code from the code behind?

I would like to build a form that generate an html code inside a for loop.

I will let the user enter the photo name and No. of photos

Then I will generate an HTML code like this:

<a href="http://www.mzinj.org/images/gallery/Photo%20(1).jpg" target="_blank"> <img src="http://www.mzinj.org/images/gallery/Photo%20(1).jpg" alt="" width="345" height="247" /> </a> <br /> <a href="http://www.mzinj.org/images/gallery/Photo%20(2).jpg" target="_blank">
<img src="http://www.mzinj.org/images/gallery/Photo%20(2).jpg" alt="" width="345" height="247" /> </a> <br /> <a href="http://www.mzinj.org/images/gallery/Photo%20(3).jpg" target="_blank"> <img src="http://www.mzinj.org/images/gallery/Photo%20(3).jpg" alt=""
width="345" height="247" /> </a> <br />

depending on the No. of the photos the code will be duplicated in the loop

Then I will display the result of the loop in label or in a textarea to let the user copy it any where

The problem is that while compiling my code it considers the HTML code as a part of the behind file and gives errors on the single quote, the double quote and on the parentheses

View 4 Replies

Forms Data Controls :: Unable To Insert Some Html Code?

Jan 15, 2010

i want to insert some html code like

<html><body>jhguyegjh<?body></html>

but it is not inserting

View 2 Replies

Forms Data Controls :: Including Grids In HTML Code?

Jan 12, 2011

I'm using System.Net.Mail.SmtpClient wherein the Mail body is HTML.

I need to populate this mail body with few dynamically generated grids.The grids are populated with datasets.

View 3 Replies

Forms Data Controls :: Display Html Code In A Datalist?

May 7, 2010

I use a datalist to display one record from a database

one field contains html tags

I bind it to a label in the itemtamplate

[Code]....

but i wont work , the formated text do not appear

It works with a detailsview , but it wont work with a datalist

View 3 Replies

Data Controls :: Dynamically Add HTML Unordered List From Code Behind

May 7, 2015

HtmlGenericControl li = new HtmlGenericControl("li");
tabs.Controls.Add(li);
li.InnerText = "new menu";
HtmlGenericControl anchor = new HtmlGenericControl("a");
anchor.Attributes.Add("href", "page.htm");
anchor.InnerText = "TabX";
li.Controls.Add(anchor);

I am using above code on my master.cs file to add new line like

<li id="one"><a href="page.htm"></a></li>on my .master filebut it not working...what i missingcode not showing any error..

View 1 Replies

Web Forms :: Inserting C # Code Within The HTML-code. Aspx?

Jan 13, 2010

I can't write in english well, but I must try to have an answer for my problem.I have a problem that I have not found a solution, regarding the integration of C # code in the HTML code .aspxI want to do a loop on the

<ajaxToolkit:TabPanel of <ajaxToolkit:TabContainer to have several tabs by a few existing data in a DB table.

Here is a moceau of my code:

[Code]....

This code gave me this error:

Message d'erreur de l'analyseur: 'TabPanel_<%= idMagasin %>' n'est pas un identificateur valide.Translation: Message parser error: 'TabPanel_ <% = idMagasin%>' is not a valid identifier.I removed idmagasin like this:

[Code]....

System.ArgumentException: Une entrée avec la même clé existe déjà .

Translation:
System.ArgumentException: An entry with the same key already existsThe result is that I found a great problem to insert a C # code in the HTML code .aspx unlike others languages like PHP.

View 1 Replies

VS 2005 Make A Smart Code Where The Next User Controls Loads Instead Of The HTML?

Mar 16, 2010

I have an application where I make advanced engineering/science calculations.

The application consists of 25 equal calculation "lines" which I have made as user controls:

web form:

Code:

[code]....

However the performance is quite bad because each line load from a database. Each line becomes visible when the last line has been clicked so I only need in fact 2 lines to be loaded at the beginning.

Can I make a smart code where the next user controls loads instead of the HTML that I have made, where all 25 lines appears and loads but are not visible until the line before has been used?

View 14 Replies

Web Forms :: Rendering HTML Code From Code Behind C#?

Jan 21, 2010

I am using gridview to bind my data since GridView could not load more than 2000 records and also it takes long time to load the data. I decided to go with XSLT transformation. Here is the problem .... I am able to transform 6290 kb of data ( into a html table formated like grid view ) with in 5 seconds but to assign that HTML table back to the innerHTML of a div tag is not responding...

What is the best method to push large amount data(HTML Code) from c# into aspx web page?

PS: I used DIV innerHtml and also Literal Control but both are very slow if the size of the table increases.

View 5 Replies

Web Forms :: Write A Html Code In The Code Behind?

Mar 11, 2011

i want to nkow ik i can write a html code in the code behind if yes show me how?

View 3 Replies

Forms Data Controls :: Add Multiple Columns In A Datalist , Without Adding Invalid Html Code?

Jun 27, 2010

I have the following code the form of a datalist,

<asp:DataList ID="DataList1" runat="server" BorderColor="black" CellPadding="3" Font-Names="Verdana"
Font-Size="8pt">

[code]...

View 5 Replies

C# - Html From Code Behind?

Feb 9, 2011

I want to insert html with a few controls +style from the code behind ( asp.net c#) how can I do it ?

View 4 Replies

How To Get The Session Var And Use It In The Html Code

Dec 26, 2010

i get a session variable from a login form and then redirect to another page :

String a = Login1.UserName;
Session["user"] = a;
Response.Redirect("~/Home.aspx");

in Home.aspx i wish to display in a div something like " Hello -Session["user"] " . How can i get the session var and use it in the html code?

View 1 Replies

Get Html Code After Css Is Loaded?

Apr 21, 2010

i already have the html code using HttpWebResponse and StreamReader but the problem is the html code has not applied the css yet?

how do i get the html code with css applied.

View 1 Replies

Files With Both HTML And C# Code In MVC

Feb 11, 2011

I've decided to try out ASP.NET MVC, having almost no prior experience in any kind of web development. I've created a MVC 2.0 project in Visual Studio and I see there are a couple of different .aspx pages included. They seem to mix both code and HTML:

<% using (Html.BeginForm()) { %>
<%: Html.ValidationSummary(true, "Login was unsuccessful. Please correct the errors and try again.") %>
<div>
<fieldset>
<legend>Account Information</legend>
<div class="editor-label">
<%: Html.LabelFor(m => m.UserName) %>
</div>
[code]...

View 5 Replies

Html Code Of GridView Within C#?

May 17, 2010

I am having an aspx page with a user control in it. The usercontrol contains the GridView. At some place within this usercontrol i need html code of GridView.

View 2 Replies

Get The Html Code In Cs File?

Jan 28, 2011

I have a form which contains Gridview(With paging enabled) and some other controls

I want to the html source code of the gridview after it is rendered in the browser

View 8 Replies

C# - Generating Html From Code Behind?

Apr 4, 2010

In my .aspx.cs I have a code that reads a .xml file and I deserialize the xml into an object called Post. Problem is that in my .aspx page I have a div and I want to fill in the content of this div from code behind using the html generated from the code behind.. How can I do this?

View 3 Replies

How To Add Vb Code In The Html Code

Feb 10, 2010

my new problem is that i want to add the session.add() command in the datagrid when a hyperlink button of a datagrid is pushed i want to store a value(to use it to another page of the site) and i think i have to do that.. does anyone know how can i put the session add command(or any other vb.net command) in the html hyperlink??

i thik somehow like this
<ItemTemplate>
<asp:HyperLink ID="HyperLink2" runat="server" onclick="<%# %>" NavigateUrl='<%# databinder.eval(container.dataitem,"url") %>' Text='<%# databinder.eval(container.dataitem,"titlos") %>'></asp:HyperLink>
</ItemTemplate>

but how exactly??

View 6 Replies

How To Access HTML Control From Code Behind

Apr 28, 2010

my application runs on the client side. I have to access a display on the asp page via javascript. I have the following code working properly:

ClientSript.RegisterStartupScript(this.GetType(), "allMessages", "<script>document.forms[0].tbDisplay.value='Messages'; </script>");

tbDisplay is a "text box" asp:textbox control. I need to replace de 'Messages' for avariable. so instead of printing "Messages" all the time, I can change the information on the variable prior to display the message. how to change 'Messages' to a variable.

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved