I have a page in my website where there is very little code-behind. I only have two lines of code in Page_Load() and the rest of the code is declarative ASP.NET code. I have a FormView control which uses a SqlDataSource to get some order information. The SqlDataSource calls a stored procedure called usp_GetOrderDetails, here's the code for the SqlDataSource:
[Code]....
<truncated>
What I want is to grab the screenshotId from the SqlDataSource when the usp_GetOrderDetails stored proc gets called and populate it into a field on the page called screenshotId. I then want to use this screenshotId to get an image from the database based on Id. populating the screenshotId field. How do I do this - do I need to have something like OnDataBound or something like that?
I have a GridView with DataSource an EntityDataSource web control.
I would like filter Data using EntityDataSource, filter show apply for the Current Logged-In User, this value should be taken using MS Memebership Provider ( Membership.GetUser(); ).
Now I cannot inf any Parameter in EntityDataSource that would allow me to dot that (in Where/Automatically generate a Where expression using provided parameter ).
I am using an ADO Entity Model for my ms-sql database.
My database has a Resellers table which has ResellerID (primary key, int) and Name columns along with other data.
I also have an Orders table which contains OrderID (primary key, int), OrderDate, ResellerID (foreign key to Resellers.ReselerID).
If I just do a query like:
[Code]....
I am able to reference order.Reseller.Name just fine with no problems.
However I have an EntityDataSource on my page as follows:
[Code]....
Notice the Include="Reseller" attribute in the datasource... I also have a GridView tied to that datasource as follows: I cut some of it off for breavity:
[Code]....
Now what I have listed above will run with no errors, but what I want to do is replace the column that displays "ResellerID" with the equivilant to order.Reseller.Name. In other words I want my grid to display the reseller's name rather than the numeric ID.
I have tried to change the DataField to "Reseller.Name" but that will generate the following error:
A field or property with the name 'Reseller.Name' was not found on the selected data source.
Is there anyway to do this without me writing a custom select statement in my code behind?
I am new to formview .My formview works fine, when I insert data into the database directly and then do an update on it. It throws an error when I try to insert a new record. The error just says
"An error occurred while updating the entries. See the inner exception for details."
How to insert data into the table using an entity dastasource?
I have a page with an EntityDataSource and I want to insert a new item using a FormView. However, the SQL database has a varbinary field which I need to insert an image into.
So far, I have all the rest of the FormView correct and it saves no problem. I can also use the asp:FileUpload to correctly obtain the data. I am assumin that I need to add some C# code to the FormView1_ItemInserting Event Handler, but that is where I am stuck. So far, this is what I have:
[Code]....
Would somebody be so kind as to point me in the right direction with the correct code to add this item to the data I am saving.
I'm face of a little problem when using GridView, an EntityDatasource and entity custom properties using a partial class. I'll describe it and I hope that someone has already find the solution because I try to figured out since two days.
I am accessing this xml file by using LINQ to XML in asp.net by using C#. I am able to access all the attributes of an XML node by explicitly specifying the name of the attribute. I want to write query on this xml file which reads all the attribute values of the xml node (In our example the node is SERVER) dynamically means I want to write the query which can read the read the value of the attribute Name & ID from first node, only name from second row, Name, ID & Parent from the third row , Name & ID from the fourth row, Name, Parent & Value from the fifth row & only Name from the sixth row without modifying the existing code every time. Once I add one of the attribute ( for example if I add the attribute ID in the sixth row ) in the above xml file then I dont need to modify my LINQ to XML query. My query should dynamically fetch the total number of attributes & display their values. Is their any way to do this ?
Nested GridView Control returns "Object variable or With block variable not set" when outer GridView returns rows.
The Nested GridView Control works as long as the outer GridView returns rows, the following code works: [Code]....
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 118: If e.Row.RowType = DataControlRowType.DataRow Then Line 119: Dim myStatus_ID As SqlDataSource = CType(e.Row.FindControl("sqlDeviceStatusAssign"), SqlDataSource) Line 120: If Not e.Row.DataItem("Status_ID") Is Nothing Then Line 121: myStatus_ID.SelectParameters(0).DefaultValue = e.Row.DataItem("Status_ID") Line 122: End If
I have tried checking for IsDbNull and checking to see if a label exists in a given row. This code *If Not e.Row.DataItem("Status_ID") Is Nothing Then* appears to do nothing.Same with the following:
*Dim localLblItemReference As Label = CType(e.Row.FindControl("lblItemReference"), Label)
To further clarify my question above, I am looking for a method to detect e.Row.DataItem("Status_ID") is nothing/null due to the outer GridView returning 0 results in a query.I have a (Outer) GridView Control with another GridView Control inside of a template field with it's associated SqlDataSource control.
In the "Protected Sub GridViewReport_RowCreated", I provide the Select Parameter for the associated SqlDataSource with the DataItem row value.When the (Outer) GridView Control does not return any rows, the "e.Row.DataItem("Status_ID")" throws a:
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
I am using three listviews on a page ... the first is always populated ... the other two are sometimes populated I want to total amounts and counts from all three ... so I set up steps in the DataBound events works great when all three listviews are populated the error "Object Variable or With block variable not set." occurs when LV2 or LV3 is not populated I've tried testing DataItem ... Is Nothing but get the failure on the If test instead
I have a simple ASP.NET (Web Form) application. I created a separate project for my DAL. In the DAL, I have created an entity called Sites.
Now, I want to bind that to a form using an EntityDataSource control but it isn't visible. What am I doing wrong?
I made sure to reference the DAL.dll in the web project and include it in the code behind for the form. It's been a while since I've been in ASP.Net :-)
What my code does is that the EntityDataSource has a Where Parameter tied to the first DropDownList and it populates the second DropDownList, but when the first DDL changes, the EntityDataSource doesn't change the values of the second DDL. Worth mentioning this is inside a ModalPopupExtender which is inside an UpdatePanel. Maybe there is a way in just putting all the data in the second DropDownList and filter it depending on the value of the first one... or something like that... so there's no need of refreshing the data.
I'm utterly new to APS.NET and in particular the MVC model...! I have a Telerik RadGrid control that I'm using. Until now (following NerdDinner) I was having the Model passed back to the view and this provided access to the various properties I wanted.
.. lets me loop around the Model object and extract Customer data. This RadGrid control, however, needs me to use an EntityDataSource (hooked up via the designer). Does this have implications for maintaing the MVC pattern? I'm a little confused about how the EntityDataSource works in relation to my Model.EDIT: I do know there is an MVC version of the RadGrid but we also need the RadScheduler and a few others.. besides that, I'd still like to know the impact.
I have a table in SQL fro "Categories" and I need populate a TreeView in my Asp.net page.
My question are:
1 - How can i populate the TreeView? 2 - How can i use the TreeView to modify the hierarchy of my Categories?
NOTE: I use "hierarchyid" SQL Columns!
CREATE TABLE dbo.CmsCategories ( CategoryId int NOT NULL IDENTITY (0,1) -- Seed = 0 and Increment= 1 CONSTRAINT PK_CmsCategories_CategoryId PRIMARY KEY, Title nvarchar(40) NOT NULL, MetaDescription nvarchar(160) NOT NULL, MetaKeyword nvarchar(128) NOT NULL, Summary nvarchar(256) NOT NULL, IsPublished bit NOT NULL CONSTRAINT DF_CmsCategories_IsPublished DEFAULT 1, CategoryNode hierarchyid NOT NULL, CategoryNodeLevel AS CategoryNode.GetLevel() );
I have an EntityDataSource and I need set WHERE to a Local Variable Type: GUID.
My problem is I am not able to send my local variable Guid to EntityDataSource for a WHERE OPERATION.
I also tried to to use a ControlParameter<asp:ControlParameter Name="UserId" /> and have a Label with Text property on my Guid converted in String. But does not work.
I've used EF4 EntityDataSources to do DataBinding with success, but here's a case where I'm stumped:
Table "CurrentComplaintsByUsers" has a foreign key over to a "Complaints" table. So in EF, I can access a CurrentComplaintByUser record, and navigate to its parent complaint like so:
var ccU = dataContext.CurrentComplaintsByUsers.First(); var parentComplaint = ccU.Complaint;
When I whip up an EntityDataSource based on CurrentComplaintsByUsers to bind a gridview, I want to get over from the "Complaint" object to an Assocation of Complaint called "Status". Here's a StatusID in my Complaint table, and so in code I can hit a complaint's status like so, including the Status properties:
FAILURE: when I try to bake this all into an EntityDataSource, I can't get from my starting item "CurrentComplaintsByUsers" over to "Status". Here's my EDS:
System.InvalidOperationException "A specified Include path is not valid. The EntityType 'EOCaseApp.CurrentComplaintsByUser' does not declare a navigation property with the name 'Status'."
I'm trying to get to the point where this works in my Gridview:
So, using declaritive markup only, how do I get to a related objects associations from the EDS? (I can do it in code, just trying to use the EDS exclusively when I can)
Other notes: if I remove "Status" from the "Include" in the EDS, then I get a NULL ERROR when it hits ..Complaint.Status.LabelText in my Gridview, pretty much what you'd expect.
I try to do exactly like this thread : http://forums.asp.net/p/1551018/3802862.aspx#3802862But when i apply the solution it do work but i can't delete an entry anymore in the GridView..