Custom Controls Don't Fire Correct Events?
Jun 30, 2010
I'm building a library of custom controls. My controls are inherited from CompositeControl. Depending on the user's answer I have to insert more custom control. I have a PlaceHolder (_ph) passed in from the client code. I insert my controls into that PlaceHolder.
My problem is the control I inserted in the event handler does not fire its event, but it fires the parent event. For example, if I have an EddDropDown A, and the user picks an answer, I have to create EddDropDown B and C in edd_SelectedIndexChanged. When I pick an answer for B, it fires SelectedIndexChanged for A instead of B.
I think it has something to do with entering the page cycle late.
this is an example of my controls:
using System;
using System.Collections.Generic;
using System.Collections;
using System.Linq;
using System.Text;
[Code]....
View 1 Replies
Similar Messages:
Sep 24, 2010
I have created login page dynamically by using texteditor. Which includes 2 texboxes and 1 Submit button.
Im saving this html in database and loading this html in the login page. Means adding this html to DIV tag innerHtml. My question is how to findout these controls in the code behind page and how fire submit button click event. Or any other alternative to do this?
View 5 Replies
Aug 28, 2010
I have a base server control class for all my user controls. Inside this class I have the following declaration:
[Code]....
Concrete user controls used in the application are used always inside a ModalPopupExtender object and the popup it is always handled with server-side code. This means that there are no controls binded to the OkControlID and CancelControlID properties of the ModalPopupExtender.
The responsibility to show the Modal Popup is then given to the aspx that has code like this in the ASPX file...
[Code]....
To hide the modal Popup the aspx just implement the event handler
[Code]....
Last, the event firing is responsibility of the concrete UserControl class that can use any way to do it's work and then fire teh event. This is done through this code:
[Code]....
The problem I am facing to is that in the OnItemSaved of the super class the ItemSaved EventHandler is always null and so the event it's never fired on the aspx page. Where am I doing wrong?
View 1 Replies
Aug 3, 2010
I have a ListView control on a page that I need to support inline editing and inserting. Before I put it inside an update panel, everything was fine. As soon as I put it in an update panel, I seem to lose theOnItemUpdating, OnItemCanceling events. The OnItemEding event still fires, though.I am doing all updating, inserting manually.
View 4 Replies
Feb 19, 2011
I have a form with a drop down list. I want to pass the value of the selected item and a hidden field called stidentid to a controller action that would check my database to see if records for that id and semester exist and return the view with the appropriate values filled in. I'm not really familliar with Javascript or Jquery so I tried this:
[Code]....
}).change();
however nothing happens when I select anything from the semester list not even a crash. What am I doing wrong?
View 25 Replies
Feb 17, 2011
I have one main gridview and child gridview.It showing all questions. for every question i have another gridview to show answer options.If i want to delete one answer option how can i delete?
View 1 Replies
Jun 8, 2010
What I did is, I have made 2 user controls. One control is inside the other.
NoW one control has a buttton and a data grid and datalist in it. When pressing button I am filling datagrid while datalist visiblity false. This is working fine. But now when I press some link button in datalist data, it should call item_command event but it is not calling.
I have also used a Updatepanel as a wrapper(all controls are inside it).
View 1 Replies
Feb 17, 2011
I have a Page that does a LoadForm("blah.ascx"). The Page does have a ModalPopupExtender on it (It was on the ascx originally but I moved it to the Page as a test, doesn't work either way). There is a Loop here so the LoadControl() will be called multiple times and will put multiple instances of the ascx on the Page.
Blah.ascx has some buttons on it but when I click the buttons the click event does not fire and the Page gets reloaded without the control on it anymore.
The Page.Page_Load event does fire. And yes, I have the LoadControl() inside an Not IsPostback check. Just the controls events, including Page_Load, do not fire on postback, only on initial load.
View 6 Replies
Jul 1, 2010
I'm using a standard GridView control inside of a web form. The web form uses a master page. The application is running within sharepoint (wss 3.0) environment. When i attach both the OnRowCommand and OnRowDatabound events to the gridview as shown in the markup below, only the OnRowDataBound event fires. The OnRowCommand never gets hit. When i press a button on a row, it posts back but never hits the onRowCommand event and simply falls through and repaints the page . However if i remove the OnRowDataBound event, the OnRowCommand event starts to fires correctly. I've tried a number of things...1. Hooking up the events in code instead of markup. (inside of PageLoad or PageInit)2. Changing the order in which the events are attached.
View 4 Replies
Mar 22, 2010
A group I am in at school is developing a website for a client. It needs to be able to send weekly emails out to all users, as well perform many other scheduled tasks.My question is: what is the best way to fire events from classes within the solution with a timer? I've read that a Windows Service can be used...?
View 2 Replies
Feb 16, 2010
So I have a page with an UpdatePanel and some controls in there. When I explicitly type/copy+paste the page's address into the address bar, let VS navigate there for me, or follow a link to the page, all of the AJAX works fine. But if I refresh this page, the JS on the page initiates the async postback, but the appropriate event is never called on the server (although Page_Load is) and the client never recieves the markup sent back by the server. This issue seems to be limited to Firefox 3.6 (Gecko build 1/15/2010)(doesn't happen in IE8). I have yet to try on other versions of Firefox.
View 2 Replies
Dec 20, 2010
Well, I'm sure this is not the first time to see this question. and TBH you can find this question answered on many other websites and blogs -not only here-
But I never saw a complete answer for this question, I mean no one talked about the advantages and the disadvantages. no one shared a real experience.
Although Quartz.NET seems like a good solution but yet, there's no enough reviews or a good comparison between the different ways to achieve such a thing.
As far as I read about it I found this are the possible ways of doing this :
Using a: Web Service, Windows Appliction, Console Application, Quartz.NET.
Examples of stuff I want to achieve with the scheduled or automatic methods/events are like archiving after a certain period, auto deleting/moving records in the database, setting a property of an object after a certain time, automatically run some methods according to my holiday schedule.
I hope you'd share your experience either with one of those approaches or share a new way of doing this.
View 4 Replies
Mar 22, 2011
I have created a custom web control. In that control on CreateChildControls method i dynamically create a Table add rows to it which contains a ImageButton and i am trying to attach an event to this ImageButton but the event never fires?
I tried on Init method too it does not work . The code goes like this on CreateChildControls
I create a Panel . The i create a table with data and an imagebutton on it I add this table to the created panel I add this Panel to the Controls.Add method.
I have also observed that if i add a control directly to the Controls.Add() method and attach an event it works fine .
Meaning ,
1. Create a button attach an event handler
2. Add to the Controls.Add() method
On doing the above it works fine . Only the child controls events do not get fired is there anything that i am missing ??
View 1 Replies
Apr 2, 2010
I have 2 web user controls, both inherit the same base class which extends UserControl. I want to raise an event on one and the other should be aware of it. both are on the same page however the 2nd control never handles the custom event i raised on the 1st one !
View 2 Replies
Feb 17, 2011
The if (!Page.IsPostBack) is always false went the page loads after i click a linkbutton and it never goes into the linkbutton event. Googled as much as I can. I am kinda new to asp
This is the code that i have in server:
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
SetDefaultView();
}
}
private void SetDefaultView()
{
MultiView1.ActiveViewIndex = 0;
}
protected void LinkButton1_Click(object sender, EventArgs e)
{
MultiView1.ActiveViewIndex = 0;
}
protected void LinkButton2_Click(object sender, EventArgs e)
{
MultiView1.ActiveViewIndex = 1;
}
// and below..
<td>
<asp:LinkButton ID="LinkButton1" runat="server"
onclick="LinkButton1_Click">Tab1</asp:LinkButton>
</td>
<td>
<asp:LinkButton ID="LinkButton2" runat="server" onclick="LinkButton2_Click">Tab2</asp:LinkButton>
</td>
View 1 Replies
Aug 4, 2010
I am trying to fire one event out of two avalible events based on a check box selectoin, I have already registered the two events in the page_load() and i check if the check box is checked (checkbox is located within a gridview) then i un-register one of the events and just keep one events registered as following(Only relative part is shown):
[Code]....
I am trying to fire one event only based on the checkbox selection. I tryed to debug and noticed that, in fact, both evetns always get fired starting first with Button_SessionStartOrEnd_StartSessino and then Button_SessionStartOrEnd_EndSessino. So how can i fire one event only? please note that my code to check if the ckeckbox is checked within the girdview works fine.
View 4 Replies
May 27, 2010
I created a customDropdown usercontrol with Events and It worked fine.
Now I stored the path of the ascx file in the database table and i want to Load the ascx file and handle the Events dynamically in an aspx page.
To Load the usercontrol and access the public properties and method, I need to know the object i am trying to load, right?
For Example
FeaturedDDL c = (FeaturedDDL)Page.LoadControl("~/FeaturedDDL.ascx").
But I dont want to hardcode objectType "FeaturedDDL", coz i dont have that stored in my Database field.
Since I am loading the usercontrol by getting the path and name of the usercontrol from the database table,how will I know the ObjectType at that time?
How to accomplish that and also how to handle the events for these type of situation?
View 1 Replies
Feb 1, 2010
For some reason I can't get the button event to fire...
This is my Accordion:
[Code]....
I dynamically add the panes and buttons...
[Code]....
These two should get fired - but they dont:
[Code]....
I read somewhere that I should add the button to the UpdatePanel
[Code]....
But when I do I get this error :
The Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).
View 3 Replies
May 12, 2010
I'm working on a questionnaire type application in which questions are stored in a database. Therefore, I create my controls dynamically on every Page.OnLoad.This works like a charm and ViewState is persisted between postbacks because I ensure that my dynamic controls always have the same generated Control.ID.
In addition to the user control that dynamically populates the questions, my questionnaire page also contains a 'Status' section (also encapsulated by a user control) which represents the status of the questionnaire (choices are 'Complete', 'Started' or 'In Progress'). If the user changes the status of questionnaire (i.e. from 'In Progress' to 'Complete'), I need to postback to the server because the contents of the dynamic portion of the questionnaire depend on the selected status.
Some questions are always present regardless of status, and yet others may not be present at all for the selected status. The point is, when the status changes, I have to postback to the page and render the right set of questions. Additionally, I need to preserve any user entered values for those questions which are 'always available'.
However, due to the page life cycle in ASP.NET, the 'Status' user control's OnLoad, which contains the correct status needed to load the right questions from the DB, doesn't get executed until after the 'dynamic questions' user control has already been populated (with the wrong/stale values).
To get around this, I raise an event from my 'Status' user control to the main page to indicate that the Status has changed. The main page then raises an event on the 'dynamic questions' user control. Since by the time this event bubbles up, the 'dynamic questions' user control has already loaded the 'wrong' questions from the DB, it first calls Controls.Clear. It then happily uses the new status to query the database for the 'correct' questions and does a Control.Add() on each. FYI, Control.IDs are consistent across postbacks.
This solution works...sorta. The correct set of questions for the selected status do get rendered; however ViewState is getting lost for those 'always available' questions. I'm guessing this is because the 'dynamic questions' user control calls Controls.Clear when responding to the status changed event. This must somehow kill the association between ViewState and my dynamic controls, even though the Control.IDs are consistent.
This seems like such a common requirement, I'm virtually certain there is a better, cleaner and less error prone approach to accomplish this. In case its not plainly obvious, I haven't been able to grok the ASP.NET page life-cycle despite working with it for the last year.
View 4 Replies
Dec 11, 2010
I have a user control with a textbox and a gridview. When data is entered into textbox it has to get data from the database and populate in the gridview. The grid view has add,edit and delete events.The user control is loaded dynamically multiple times on to the page.My issue is when i have 2 or more user controls and if textbox of usercontrol1 is changed, it reloads both the controls and fires the postback event of textbox twice each for the user control, where as it has to execute only once. due to which the data modifications in the grid are lost as it pulls back the data once again from the database.
View 3 Replies
Jul 22, 2010
am creating a custom server control and there are textbox and button.
I want to add event button to let user execute his/her own code.
I mean my event must show in Events menu at VS (like Property)...
the following image show :
View 4 Replies
May 27, 2010
I'm new to ASP.net 3.5 and testing functionality before developing an asp.net web site. I created a page with a formview. I added several text boxes. I created an event on the FirstName_TextChanged event and added a stop in the sub. When I open the page in the browser and type in some text in the FirstName and press tab, nothing seems to fire.
1) Is this supposed to fire on the client side when text is changed?
2) If so, would the vb.net code entered work like Javascript code on the server?
3) If so again, is it possible to update another textbox based on the text entered into the FirstName on the Client Side (would do this in Javascript in Classic ASP)?
I think I'm totally confused. I've been searching web for article about how to do this.
View 3 Replies
Mar 30, 2010
During Asynchronous postback (Ajax) will Page_PreInt() ,Page_Init(),Page_Load() events fire again?
View 1 Replies
Mar 6, 2011
I am using 3 tables and are trying to get the correct info belonging to the correct id. Like this: I go to a page and here i want to see the information from the 3 tables using a specific id.
I have written this so far in a query:
[Code]....
My problem is that the last line does not work and i am uncertain how to make this work? How to write it correctly that is.
View 2 Replies
Mar 15, 2011
I'm going to use aspx pages as templates for code-generator. I found two ways how to achieve it, but with both have troubles.
Test project consists of two files code.cs and test.aspx with only "Hello!" text.
[Code]....
1. GenerateA with GetDomainForGenerator failed with "This method cannot be called during the application's pre-start initialization stage."
in the out.txt and stack trace
[Code]....
2. GenerateB with copy-pasted CreateWorkerAppDomainWithHost from cassini source generates correct out.txt
But when I put smth related to my assembly in test.aspx (for ex.:<%@ Page Language="C#" %> <%@ Import Namespace="TestHost" %> Hello!)
the result is "Compilation Error" and the everything is good when import for example System.
I dislike both of listed approcahes.
The first is due to magic values in dom.SetData and the second one due to magic System.Web.Compilation.BuildManagerHost
and I don't know what is happaning in background.
So, how to create and configure AppDomain and Host?
Where can I read about background process of HttpRuntime?
View 1 Replies
