How To Migrate Web.config Files To New Versions Of Framework
May 27, 2010
I've migrated two ASP.NET MVC 1 solutions to MVC 2 and therefore kept my web.config almost the same, just changed the necessary stuff in it as documented in Release notes.Although I created a few new test MVC 2 webapss from scratch, until now I haven't really checked out the default new web.config. As I created a new empty MVC 2 Web App today and opened the web.config, I discovered it's much smaller. There's almost no modules, no handlers, etc.
View 1 Replies
Similar Messages:
Mar 30, 2011
I am trying to tune IIS to reduce contention, and following many articles on the .net I am trying to locate this in the file to no result:
<system.web>
...
<httpRuntime minFreeThreads="8" minLocalRequestFreeThreads="4" ... />
....
<processModel maxWorkerThreads="20" maxIoThreads="20" ... />
....
</.system.web>
Is it normal that none of the .net framework versions contain a machine.config file that contains the above settings?
View 3 Replies
Dec 11, 2010
I'm working with an MVC2 app that had migrated from an MVC1 app quite a while ago. Things have been working - i've been able to compile and deploy a number of iterations without any problems ..
I've noticed that the version info - that bit in the footer of runtime errors - i've received during the normal course of development reads:
Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955 despite the fact that the project's Properties | Application tab shows the target framework to be .net 3.5. I _think 3.5 is required for mvc2 apps, isn't it?
Shouldn't I expect to see runtime error pages pointing to version info at the 3.5 version?
UPDATE: As that this isn't a simple matter of a framework mismatch, here's the error - but given other factors, I'll assume I need to repair/refresh the workstation's framework installs. The same code works on another ws.
[code].....
View 1 Replies
Feb 8, 2010
can different versions of dotnet framework co-exist in a same machine ? will it have any impact while developing ? can we choose required framework within VS2005 IDE as and when needed?
View 7 Replies
May 17, 2010
how to detect the framework versions installed on a server without access to remote desktop or registry? Our server is hosted by Go Daddy and we have limited access, so I wondered if there was a way programatically (in VB if possible)to see the highest or all framework versions installed on the server.
View 3 Replies
Apr 14, 2010
I have an ASP.Net web site (ASPX and ASMX pages) with a single web.config file. We have a development version and a production version. Over time, the web.config files for development and production have diverged substantially. What is the best practice for keeping both versions of web.config in source control (we use Tortoise SVN but I don't think that matters)?
It seems like I could add the production web.config file with a name like "web.config.prod", and then when we turnover all the files we would just add the step of deleting the existing web.config and renaming web.config.prod to web.config. This seems hackish, although I'm sure it would work. Is there not some mechanism for dealing with this built in to Visual Studio? It seems like this would be a common issue, but I haven't found any questions (with answers) about this.
View 3 Replies
Nov 30, 2010
I am setting up a new website on new web servers that are running IIS 7.5, which is new to me. I have ran into a problem when deploying an ASP.NET app that is using the 4.0 framework. I get error messages about conflicts with the web.config file associated with the Default Web Site. The asp.net app defined in the default website is using the 2.0 framework currently. My 4.0 framework app is defined as an application under the default website. Both are using different Application Pools. I tried adding this to my 4.0 apps config file
<location path="." inheritInChildApplications="false">
How do I get around this web.config conflict issue? Update for error message: There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined. The config file for the 4.0 app does not even have this section. The default website app does have this.
View 2 Replies
Jan 18, 2011
I have a project at work where I need different versions of the same site.
I need to accomplish this by having different versions of the same resource files.
I would like to store the different versions of the same resource files in seperate projects in the same solution. Then choose which project of resource files to use when I publish or compile.
I've been searching the net everywhere and my deadline is coming up.
View 2 Replies
Aug 9, 2010
I made a change in my machine.config for a 1.1 application and then later I upgraded the application to .Net Framework 3.0/3.5. Will that configuration change still apply or do I have to make that change in my local web.config for the 2.0 machine.config/web.config?
View 1 Replies
Feb 16, 2011
Currently, I work on an ASP.NET project which is hosted under version control and is used on several developer machines, tester machine and production environment.
In three cases, configuration (Web.config) may be different. For example, developer and tester environments use testing SQL Server, whereas in production environment, another SQL Server is accessed, so the connection string is different in those cases.
We want to keep three versions of Web.config in subversion. But modifying each of three files every time we need to add, remove or change a common setting is annoying: it would be nice to have a common, master Web.config, which will be inherited by each of the three Web.config files.
How to set up an ASP.NET project which will use a master configuration file and different slave configuration files on different machines, thus sharing the same project/source code/configuration files in subversion?
View 2 Replies
Sep 1, 2010
We are experiencing some strange behaviour on one of our ASP.NET web servers (Windows 2003 64-bit). After some activity, two third-party controls are unable to run correctly. One is log4net (it does not write error messages out) and the other is a menu control (it displays eval message instead of picking up its license). The one common thread is that both controls pick up their config from external config files (linked to from web.config).
Just wondering if anyone has any thoughts on this or experienced this in any way. Is it related to file/folder rights? The server has been running fine for a while and just started exhibiting this behaviour. Perhaps it occurs around the time the worker processes are recycled.
View 1 Replies
Jul 1, 2010
I was following the tutorials from this two sites:
http://www.15seconds.com/issue/070104.htm
http://aspnet.4guysfromrolla.com/articles/020404-1.aspx
Following the first site, it had worked but when I´ve moved the pages and files to other folders and set the web.config file on this folder, now it won´t work at all!!!
The file is an *.swf object. I did put the asapi.dll to map the extension on the website root, I´ve put the
[Code]....
on the web.config new folder and on the web.config website´s root.
It won´t work!!! I can access the file directly!!! on the web.config of the folder that contains the file, there is a <deny users="*" /> line.
View 4 Replies
May 7, 2010
I just upgraded to VS 2010 and MVC 2.0 and I noticed the web.config has two additional files attached to it? Are these files used to specify debug and release specific settings, so you don't clutter up the main web.config?
Does it even make sense to place a connection string in the root web.config file if I have have a local and remote one in the debug and release web.configs respectively.
View 1 Replies
Apr 16, 2010
I have a framework 2.0 asp.net website, I want to change it's framework version to 3.5. Is it possible to do this manually from web.config file? I don't want to change from visual studio property pages. I need to change from web.config, what should I do?
View 2 Replies
Nov 15, 2010
I'm using IIS 7.5 on Server 2008 R2 to configure a .Net 4-based website. I've used the Web Deployment Tool to import a known-good, 32-bit Windows 7-based IIS server package. As far as I can tell, the 2008-based IIS server and application pool are now properly configured to use .Net 4, and that the server setup is identical to that of the known-good configuration.The problem I'm having is that when I attempt to load a page on the new site, IIS returns a compilation error of the .Net framework's web.config. The error is copied below. It's my understanding that a properly-configured server shouldn't have any problem compiling this file, so I'm looking for some pointers on what I can do to resolve this. I've verified that:
both .Net 4 and .Net 3.5.1 are installed on the server, the 'default' page at http://localhost loads properly http://localhost/Services, the root folder of my application, can be browsed commenting out the offending System.Xml.Linq namespace simply results in a compilation error of some other namespace in the same group.
Server Error in '/Services' Application.
Compilation Error
Description:An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0234: The type or namespace name 'Linq' does not exist in the namespace 'System.Xml' (are you missing an assembly reference?)
Source Error: Line 400: <add namespace="System.Web.UI.WebControls.WebParts" />Line 401: <add namespace="System.Web.UI.HtmlControls" />Line 402:<add namespace="System.Xml.Linq" />Line 403: </namespaces>Line 404:
Source File: c:WindowsMicrosoft.NETFrameworkv4.0.30319Configweb.config
Line: 402
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
View 1 Replies
Apr 13, 2010
I have developed my web app in 3.5 framework and deployed at high config server(15 gb ram). In my app there are some rdlc reports which always throws out of memory exception. each report has around 15-20 pages. rest of pages are working fine. there are 700-800 users hitting this site concurrently. i m checking my server utilization and its never gone beyond 2 gb. wot i need to do so that my app can utilize full memory.
View 2 Replies
Dec 18, 2012
when i am browsing a sample web downloaded it shows
Line 20: <compilation debug="false" targetFramework="4.0">
I am using VS 2008 sp1
I Tried: Â right click website >> Property Pages >> Build >> change "Target Framework" to .NET Framework 3.5.
but still the error is same
View 1 Replies
Feb 2, 2011
I'm interested to know how others maintain their web.config files for deployed applications. (assuming no automated deployment mechanism - that is out of the scope of this question)So during development, some developers might make use of web.config transformations, build/publish their projects (debug/release, test/live configurations), then deploy all published artifacts to a web server and set up IIS. Some developers might build/publish their projects, deploy published artifacts to a web server, set up IIS, then manually update the web.configs for the specific environment (test/live, etc) they are deploying into
View 2 Replies
Jun 6, 2010
In my experience, web.config files are widely reviled. In particular, I have found them difficult to manage when you have multiple environments to support, and fiddly to update due to the lack of validation at update-time and the verbosity of XML.
View 2 Replies
Nov 16, 2010
I have two webconfig files, on in the root directory and one in the other directory. I dont know how to access or specify for the particular pages or APIs those are in the folder.Root webconfig file used by another section and the 2nd one accessed by another api. I have no idea about that
View 3 Replies
Jan 13, 2010
I have many ASP.NET applications running on server and i want to encrypt the web.config file for each.Is there a way I can encrypt all config files using single class/app or do i have to write separate code under each solution/project to encrypt config?I have idea how to do one file in a project usinghttp://davidhayden.com/blog/dave/archive/2005/11/17/2572.aspxBut i want to use a centralized or single app to encrypt all
View 2 Replies
Aug 17, 2010
I am currently trying to publish a web application in TestRelease mode and when I do, the following dll is compiled and put into the bin folder.Microsoft.VisualStudio.Settings.dll.I do not get this dll when I comple in release or debug mode so wondered if there is a setting I can change so this dll does not appear in the bin folder when I compile in TestRelease or TestDebug mode ?When I get that dll in the bin folder and try to deploy the application to our test server, I receive the following message: Could not load file or assembly 'Microsoft.VisualStudio.Settings.dll' or one of its dependencies.Any suggestions on why that dll appears in the bin folder and how I can prevent it from being deployed when I pusblish through visual studio ?
View 1 Replies
Mar 23, 2010
How can I use web.config file in VB.net class library.
View 4 Replies
Oct 18, 2010
I have mulitple websites using the same code but different web.config files. Is there a way where I can achieve not having multiple copies of the same code? so its easy to mantain?
View 1 Replies
Mar 24, 2011
I have a couple of configuration files flxConnection.config and flxSecurity.config files which are being referenced from the Machine.config file like below.
<securitySettings configSource="flxSecurity.config" />
<connectionStrings configSource="flxConnection.config" />
I would like to encrypt the files (a) flxSecurity.config and (b) flxConnection.config using the RSAProtectedConfigurationProvider using a custom RSA key, which can be deployed to other servers. How is that possible? If possible, looked at a variety of stuff in the internet and they all seem to be referring to either Web.config or Machine.config encryption which is pretty straight-forward. This is how the flxConnection.config looks like,
<?xml version="1.0"?>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated
Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
</connectionStrings>
This is how the flxSecurity.config looks like,
<?xml version="1.0" encoding="UTF-8"?>
<securitySettings>
<add key="APC_APP_ID" value="apcrpt"/>
</securitySettings>
View 3 Replies
