I have a wizard control and I have defined a custom header template for it and I have put a label control inside that header template and I need to access it programaticly at runtime.
How do I get reference to it in the 'ActiveStepChanged' event of the wiard?
I want to raise an checkbox check-changed event but its not firing :( . It Dosent raise even an command event.
My Requirement :
My Requirement is that i have a Datalist with header checkbox in headertemplate and a child checkbox in itemtemplate and a gridview control. Checking and unchecking will update the gridview control.
I am trying to access a LinkButton that is inside a PagerTemplate in a GridView.
However, I am getting a NullReferenceException and I don't know what I am doing wrong here.
I have tried the following...
((LinkButton)GridView1.BottomPagerRow.FindControl("lnkbtnPrevious"));
((LinkButton)GridView1.FindControl("lnkbtnPrevious"));
Im wondering how to get a label control that is in a header template in a datalist on an aspx page. I need the control text to change when the user checks a checkbox outside of the list on the page somewhere. I tried Itemdatabound, but I dont want to have to rebind the list everytime the user checks the box (lots of slow reaction time)
View 1 RepliesHow can I get all the textboxes inside a create user wizard control using getElementsByTagName().
Below is my JQuery code:
[Code]....
The above code isn't displaying hint text when the textbox retreives focus.
I think there is something wrong with this getElementsByTagName("asp:TextBox"); , I have also tried getElementsByTagName("TextBox"); , getElementsByTagName(":textbox"); and getElementsByTagName("input"); .
But no one of them gets the textboxes array.
Can anyone tell what will be the correct syntax for getting all the textboxes inside a create user wizard control using getElementsByTagName()?
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
i am try to access control Label in header template of forview i have tried following code but it doesnot worked.
Label l =(Label) frmuserDetail.HeaderRow.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
Label l=(Label)frmuserDetail.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
have a wizard control inside an update panel. have a radiobuttonlist that autopostback's when i click a radio button, page posts back & the page hops back up to the top. i want a user to be able to click radio controls & checkboxes with the form to be fluent; the hop back up to the top is rather annoying & may confuse the user.
View 1 RepliesI am using asp.net 2.0 (Visual studio 2005)
I have a update panel and Update progress inside an Wizard control's Wizard Step.
But the update progress is not shown when i click on the 'Finish' (in which the ajax controls are placed) button inside the Wizard step
Note : I am using the FinishNavigationTemplate to define the 'Finish button and OnClick Event of the Button, i am setting the Updateprogress control location using DomElement
Sys.UI.DomElement.setLocation(updateProgressDiv, 300, 300);
I have used calender web user control inside my project where i took textbox,button and calender...but after dragging onto my aspx page..i am unable to access this textbox,calender and button on aspx page..
View 5 RepliesI need to access a control inside a repeater and change its properties. To enable it or not. I got an erorr message Object reference not set to an instance of an object. Here is my code inside a method. protected void
rptCAP_ItemDataBound(object sender, RepeaterItemEventArgs e)
{
LinkButton lnDel = (LinkButton)rptCap.FindControl("lnkDelete");
lnkDel.Enabled = false; //<<<<< this is where the error occur
}
The name of the repeater control is id="rptCAP"
i have a Wizard control with 3 steps, in step 2 i have a formview, inside formview1 a have a label and a button.
When i click the button i would like the label to over wright the text of the label.
how can i access this label.
i tryed this with no success.
[Code]....
I want to access my textbox with id=UserName from javascript but its giving me error (on the highlighted JS line) that UserName does not exists in the current context.
Can any one tell me how to acces a controls value with is residing in asp.net's CreateUserWizard control?
Here is my code-
[Code]....
I need to Bind "JobRefNo" to the query string.Below binding gives an error.what is the correct way?
<asp:LinkButton ID="MoreLinkButton" PostBackUrl="/real/Coordinator/Home.aspx?JobRefNo="'<%# Bind("JobRefNo") %>' runat="server">Go To Job...</asp:LinkButton>
Link Button is inside a DataList control.Error says "Call to Bind must be assigned to a property of a control inside a template"
Here is a perplexing issue I have not seen a good answer to on StackOverflow, although there a couple stabs at it... I have a situation where I'd like to do this:
<asp:Repeater ID="MyRepeater" runat="server" OnItemDataBound="MyRepeater_ItemDataBound">
<ItemTemplate>
<li id="id?">
All the other stuff
</li>
</ItemTemplate>
</asp:Repeater>
is how do I get the ID of my <li> elements to be id1, id2, id3, etc., based on the ItemIndex they are bound to? So far the most... er..."elegant" solution I've come up with is to replace the <li> with an asp:Literal and dump the <li...>' text. But that just feels... so wrong. And no, I'm not using ASP.NET 4.0, which I've read will provide this functionality.
I built a master page (master01.master), then I built a header control (header.ascx), and added the header-control to the master page.
Now I want to access/alter the label on the header control, from other pages in my web application.
How can I do this?
referencing a control inside the createuserWizard template of the createuserStep
I tried like this:
Dim lastn As TextBox = CType(CreateUserWizard1.FindControl("LastNameTxt"), TextBox)
and like that:
[code]....
I tried to get the LoginName control inside LoginView LoggedIn template , despite several methods, the code still could not work.
I wished to change the default username to the customer name.
Here is the code:
<asp:LoginView ID="LoginView1" runat="server">
<LoggedInTemplate>
Hello, <asp:LoginName ID="LoginName1" runat="server"></asp:LoginName>
<br />
<div style="text-align: right; margin-right: 5px ">
<asp:LoginStatus ID="LoginStatus1" runat="server" LogoutPageUrl="~/Home.aspx" Font-Underline="True" />
</div></div>
</LoggedInTemplate>
</asp:LoginView>
At the code behind :
protected void Login1_LoggedIn(object sender, EventArgs e) {
LoginName loginName = LoginView1.FindControl("LoginName1") as LoginName;
Response.Write(loginName.ToString()); //for now I used Response.Write for testing purposes
}
how can I access the header of a grid view control?
View 4 RepliesI have to access the parent form's controls inside an event handler method on my user control's code behind.
View 4 Repliesi created a user control that has a template container.
[code]....
This is control is placed in a repeater which lists some customers. The customer is than bound to the user control. When the name template is instantiated in the container, the customer object is not yet available, but I need to access its name because it needs to get parsed before.
[code]....
Question: How can I access properties set for the user control BEFORE the template container is instantiated?
OnSelectedIndexChanged event for the dropdown is the fired.
I have set the autopost back value = "true", EnableViewState ="true" for page tag and gridview tag.
I have a grid view control with Template Field containing Item Template as Checkbox control and the Header Template is containing the label with column header name.
I want to click the coulmn header label and all the check boxes must be checked once.
provide me some examples or ideas how i can achieve this
[code]....
While running ItemDetabound upon load of a listivew, I am trying to access the text in a label of the LayoutTemplate of a different Listview. It works fine if I try access the same labels under the same names if they are in the same listview, but not if they are in a different one. It was working for a while, can't figure out what I changed, but now says that object doesn't exist.
[Code]....
I have one grid which have 5 columns 1 for subject,2,3,4 for marks which have textbox to insert obtained marks,and last column have one lable to display total of (2+3+4),now i want total value on textbox event,when user enter any value to any column of textbox i need to display total of all three columns in total column. that things i did using javascript now i have one grand total text box in footer template according to sum of total i need to display grand total.so how can i get that footer template textbox in rowtype of DataControlRowType.DataRow.JAVASCRIPT :
<script language="javascript" type="text/javascript">
function sum(m1, m2, m3, txtTotal,txtFTotal) {
var mark1 = document.getElementById(m1).value;
[code]...