I am using Visual Studio 2005, and running my application from inside it, directly using its development application server.
If I set a breakpoint inside Application_Start and one inside Session_Start, the latter is reached first, and I honestly think it should be the other way around.
what might be best suited to place in the Application_Start and Session_Start subroutines? I know when each subroutine is called. Application_Start when the first user first accesses the web application. Session_Start when a user opens a session with the application. But what code belongs in each of these subroutines. What should the code in each subroutine do?
View 2 RepliesI have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
I am loading the autocomplete extender properly but I need the PK from the selectedValue. I have looked at other examples and they do NOT show how to drill into the tabcontainer, then drill into the listview, and then locate the extender value. Here is what I have so far. My "TABCONTAINER" value shows the extender correctly but I am unable to locate it.
[Code]....
I've created a multiple uploadfile user control - upload_multiple_files.ascx:
[Code]....
which has an update panel ID = up_upload_multiple_files this user control will be placed inside a modalpopupextender. My question is when I click in any button AddFile, RemvFile, Upload there's a postback so the page is reloaded and the modalpopupextender disapears Is there a way to to troubleshoot this?
I have a boolean / bit value in the database called "is_paid". Depending on this value I want to Disable a button. (the same would go for example to set a textbox not Visible, but anyway)
What I want is to Disable the button, if my boolean is 1 (true).
First I tried to convert my boolean value to text:
<asp:Button
ID="btnCalculatePayment"
runat="server"
Text="Submit"
onclick="btnCalculatePayment_Click" Enabled='<%#
Convert.ToBoolean(Eval("is_paid")) ? "False" : "True" %>'
/>
But got an error:
CS0030: Cannot convert type 'string' to 'bool'
However, if I use it one a Label it works fine: <asp:Label
ID="lblIsPaid"
runat="server"
Text='<%#
Convert.ToBoolean(Eval("is_paid")) ? "True" : "False" %>'></asp:Label>
So another trial I did was to CAST the data from the database to be the text that I want, like so:
SELECT not_paid = CASE WHEN is_paid = 0 THEN 'True' WHEN is_paid = 1 THEN 'False' END ....
And my code changed to:
<asp:Button
ID="btnCalculatePayment"
runat="server"
Text="Submit"
onclick="btnCalculatePayment_Click" Enabled='<%#
Bind("not_paid") %>'
/>
But got this error:
System.InvalidCastException was unhandled by user code
Message=Specified cast is not valid.
Source=App_Web_absjd3ob
StackTrace:
at ASP.manager_aspx.__DataBinding__control74(Object sender, EventArgs e) in c:Documents and SettingsAdminMy DocumentsVisual Studio 2010ProjectsWebManager.aspx:line 219
at System.Web.UI.Control.OnDataBinding(EventArgs e)
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBind()
at System.Web.UI.Control.DataBindChildren()
So I wonder, is it possible to change the "Enabled" property based on by boolean value?
Hello all i have this little issue getting this to work, i have a dropdownlist in asp.net inside a formview and jquery cant find the control im guessing because its inside a form, this is what i got and it works on another page without a formviewi get this errorName 'Country' is not declared
[Code]....
I need the ability to check a box and then store or remove the text of the checkbox clicked to my sql server database. see my code below that is written in vb.
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="SBN_Company_Cat_Types.aspx.vb" Inherits="ShopBuyName_Test_Site.SBN_Company_Cat_Types" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code].....
I have a gridview inside UpdatePanel.
Inside gridview there is a dropdownlist and a button on each row. On button click I am opening a panel through Modal popup extneder.
Inside that pop up there is again a dropdownlist. I am adding an item into this dropdownlist based on the selection from the dropdown inside gridview.
like ddl.items.insert(0,'xyz');
But first time this inserted item is not getting reflected in the dropdownlist. But after one postback this item is getting reflected.
I'm trying to change the visibility of a imagebutton to false, if the imagebutton.ImageUrl="". The problem is that the imagebutton is inside "ListView2", and "ListView2" is inside "ListView1". Who can I do this in vb code... or even a javascript.
View 4 RepliesI have an UpdatePanel with a GridView. This GridView has a template column that is a DropDownList. The problem is that the SelectedIndexChanged event does not fire for the DropDownList. Here is the code:
[Code]....
The codebehind:
[Code]....
I have a listview that is showing its result by using a linq query. The linq query goes like this.
[Code]....
* db.Varer: Varer is a table that contains basic product information like proudct name, product nr. etc. ** a.fk_kategori_id == CatParamId : I'm just saying limit the result according to the Category ID (a.fk_kategori_id). The category id is coming from a dropdownlist (CatParamID) *** Join: Besides the Varer (Product) table I also have another table, Sizes. This Sizes table contains 6 columns (ID_Sizes (int) primary key and the columns: OneSize, S, M, L, XL, XXL all are bit (true or false)). There is a relationship between Varer table and Sizes table. It says that I can only insert a value into the "fk_sizes_id - column" of varer table if that value already exists as primary key within the Sizes table. **** I'm starting by picking basic product values like productId, ProductName etc from the Varer (a) table ***** Then I'm picking the corresponding Sizes values (onesize, s, m, ...) from the Sizes table. Now within my ListView I'm showing the above result by using Eval, like this.
[Code]....
And this works perfectly, but now comes the thing that is causing me trouble. I have the below drop down list (still within the ListView ItemTemplate):
[Code]....
I want this drop down list to be populated with only those of the "linq query's Sizes table result" that are true. By "Sizes table result" I mean these
[Code]....
I have gridview in my page that users can edit their data in gridview... and in this gridview I define label that I want when users click on Edit button it change label3.text:
below is code:
<asp:GridView ID="GridView1" runat="server" CssClass="DGridView1"
AutoGenerateColumns = "false" Font-Names = "Tahoma"
Font-Size = "9pt"
HeaderStyle-BackColor = "#e0e0e0"
OnPageIndexChanging = "OnPaging" onrowediting="EditCustomer"
onrowupdating="UpdateCustomer" onrowcancelingedit="CancelEdit"
GridLines = "Both" OnRowDataBound = "OnRowDataBound"
>
And .cs:
protected void EditCustomer(object sender, GridViewEditEventArgs e) {
Label Label3 = (Label)GridView1.Rows[e.NewEditIndex].FindControl("Label3");
Label3.Text = "neda";
GridView1.EditIndex = e.NewEditIndex;
BindData();
BindData1();
}
but here when I click on EditCustomer it doen't change label3.text
I'm trying to add and edit an image which is located in a detailsview which is inside an UpdatePanel. After I read relevant topics in the forum I installed the Ajax Control Toolkit. Below is my source code. When I used it only for insert new image it worked great. The problem caused when I tried to implement it on the Edit mode, i.e. when I tried to edit the image and upload a different image. Unfortunately it didn't work as I hoped. Nothing happend and the image hasn't been changed. I also tried to change the IDs (AsyncFileUpload ID) to be the same in both places but it didn't work either.
The source code:
<asp:DetailsView ID="dvMovie" runat="server" Height="50px" Width="695px"
AutoGenerateRows="False" DataSourceID="sdsMovieById"
BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" [code].....
Here is my code. I'm able to find Asp.net UserControl and play with attributes but I need to call specific method inside of it.
var usercontrol = (UserControl)RadDockableObject1.FindControl("ControlName");
usercontrol.Visible = true;
usercontrol.MethodName();
I have a ObjectDataSource and a ListView referencing it.
I have created a Templated User Control (see:
http://msdn.microsoft.com/en-us/library/36574bf6.aspx) and placed it in the ListView's InsertItemTemplate
It has one template <ContentTemplate>. Inside that template, I've defined a couple of server controls with their properties = '<%# Bind("colName") #>'.
See below:
[Code]......
I have a literal inside each datagrid item. When the datagrid binds I set the literal equal to a small javascript script (a third party source). It works great. when I update my update panel the javascript is lost. I know this is a known issue. From googling they recommend you use:
ScriptMananger.RegisterStartupScript
However this renders the javascript at the bottom of the page. I need it inside my datagrid items. Is there a way that I can register my javascript to my literal control?
I've got a textbox being used to enter a password inside a wizard control. I'm trying to get a password strength meter working with it.
Unfortunately, the password box isn't visible until step 4 and this means that I can't register the event handler onload() and putting some JS next to the PW box to register the event handler doesn't seem to fire. I'm guessing this is due to the contents of the wizard being loaded through an AJAX postback.
[code]....
i have the following code below and was lookign to clean it up, but am not sure if it needs clean up or not.
foreach (SearchResult sr in mySrchColl)
{
string strValIn = sr.Properties["in"][0].ToString();
string strValOut= sr.Properties["out"][0].ToString();
}
do i change this to something like this:
string strValIn = "";
string strValOut= "";
foreach (SearchResult sr in mySrchColl)
[code]...
whats the difference or are these two identical?
I have a masterpage and inside that masterage is a user control that has a toolbar with a save button. I then have an aspx page that inherits form t he master page. In that page I have and updatepanel. Is it possible to set the post back trigger to the Save button inside the usercontrol?
View 3 RepliesI have something like this:
[Code]....
[Code]....
This does NOT work. What's wrong here?How do I accomplish my goal? I MUST use the Button1_Click event for this one.
I have gridview like this:
<gridview id="gv1">
<EmptyDataTemplate>
<asp:textbox id="txt1"/>
<asp:Button ID="btn1" />
</EmptyDataTemplate>
</gridview>
How do i put a cursor inside textbox in Button_click event?
I wanna access the literal1 text which is placed inside panel 1 and panel1 is placed inside datalist1 ...
i wanna retrieve literal1 text on page load event using VB.NET
i have a repository class inside my model folder; this repositiry contains many methods , which are called from Action methods in the controllers; so my question is :- if i have a method insidle my model.reporsitory which calls a stored procedure, then can i call it an "action method"? or "action method" expression only apply to controller methods?
View 4 RepliesCan i put gridview inside gridview and bind data to that inside grid?
View 4 Replies